[1] [1] Ranman Q I, Anmad M, Misra S K, et al.. Efficient degradation of methylene blue dye over highly reactive Cu doped strontium titanate (SrTiO3) nanoparticles photocatalyst under visible light[J]. Journal of Nanoscience and Nanotechnology, 2012, 12(9): 7181-7186.

[2] [2] Zheng Xiaobing. Research on dielectric property of barium strontium calcium titanate-based ferroelectric ceramics[D]. Tianjin: Tianjin University, 2011: 11-25.

[3] [3] Wan Xiaojing, Wang Li, Chen Jiangbo, et al.. Effect of variable partial pressure of oxygen for SrTiO3 thin films using pulsed laser deposition[J]. Chinese J Lasers, 2011, 38(9): 0907002.

[4] [4] Scott D J, Manos S, Coveney P V, et al.. Functional ceramic materials database: An online resource for materials research[J]. Journal of Chemical Information & Modeling, 2008, 48(2): 449-455.

[5] [5] Wang Wei. Study on two-sided lapping of SrTiO3 ceramic substrates and its surface quality[D]. Guangzhou: Guangdong University of Technology, 2014: 11-20.

[6] [6] Zhang Wei, Li Guozhu, Wang Chunming, et al.. Process optimization and design of fiber laser cutting aluminium-lithium alloy[J]. Chinese J Lasers, 2015, 42(2): 0203003.

[7] [7] Chen Cong, Gao Ming, Gu Yunze, et al.. Study on fiber laser cutting of aluminum alloy sheet[J]. Chinese J Lasers, 2014, 41(6): 0603004.

[8] [8] Kang H S, Hong S K, Oh S C, et al.. A study of cutting glass by laser[C]. SPIE, 2002, 4426: 367-370.

[9] [9] Zhimalov A B, Solinov V F, Kondratenko V S, et al.. Laser cutting of float glass during production[J]. Glass and Ceramics, 2006, 63(9): 3-5.

[10] [10] Tsai C H, Liou C S. Fracture mechanism of laser cutting with controlled fracture[J]. Journal of Manufacturing Science and Engineering, 2003, 125(3): 519-528.

[11] [11] Tsai C H, Ou C H. Machining a smooth surface of ceramic material by laser fracture machining technique[J]. Journal of Materials Processing Technology, 2004, 155-156: 1797-1804.

[12] [12] Tsai C H, Chen H W. Laser cutting of thick ceramic substrates by controlled fracture technique[J]. Journal of Materials Processing Technology, 2003, 136(1-3): 166-173.

[13] [13] Pereles-Santiago V, Washington M, Brugan P, et al.. Faster and damage-reduced laser cutting of thick ceramics using a simultaneous prescore approach[J]. Journal of Laser Applications, 2005, 17(4): 219-224.

[14] [14] Kondratenko V S. Method of splitting non-metallic materials: US: 5609284A[P]. 1977-03-11.

[15] [15] Xie Xiaozhu, Huang Xiandong, Chen Weifang, et al.. Study on scribing of sapphire substrate by pulsed green laser irration[J]. Chinese J Lasers, 2013, 4(12): 1203010.

[16] [16] Carslaw H S, Jaeger J C. Conduction of heat in solids[M]. England: Oxford University Press, 1959: 33-50.

[17] [17] Zhao Qingliang, Jiang Tao, Dong Zhiwei, et al.. Ablation threshold and material removal mechanisms of SiC processed by femtosecond laser[J]. Journal of Mechanical Engineering, 2010, 46(21): 172-177.

[18] [18] Yan Xinggui, Wang Wenxian, Cui Zeqin, et al.. Investigation of cutting process of AZ31B magnesium alloy plate via solid-state pulsed NdYAG laser[J]. Applied Laser, 2010, 30(5): 381-385.

[19] [19] Li Xiangyou, Zeng Xiaoyan. Kerf roughness and quality control of laser precision cutting[J]. Chinese J Lasers, 2002, 29(2): 176-180.

[20] [20] Boley B A,Weiner J H. Theory of thermal stresses[M]. New York: Dover Publications Press, 1997: 62-95.

[21] [21] Dobrovinskaya E R, Lytvynov LA, Pishchik V. Sapphire: material, manufacturing, applications[M]. New York: Springer Press, 2009: 35-66.

[22] [22] Yang Junfeng, Feng Yilong, Zhao Haifei, et al.. Grain boundary dielectric ceramics and the single layer chip capacitors[J]. Materials Research and Application, 2008, 2(3): 207-210.

[23] [23] Li Ning, Wang Huiqiong, Zhang Yufeng, et al.. Thermal conductivity studies of SrTiO3[J]. Material Sciences, 2014, (4): 73-79.

[24] [24] Cai Zhixiang, Gao Xunyin, Yang Wei, et al.. Study on fiber laser cutting of sapphire substrate[J]. Laser & Optoelectronics Progress, 2015, 52(8): 081403.