[1] [1] Zhao N, Guo H, Fang D Z, et al. Research on machining face gears using a CNC hobbing machine[J]. Advanced Materials Research, 2010, 905(97-101): 3761-3764.

[2] [2] Wang Y Z, Hou L W, Liu Y Q, et al. Research on machining method of complex surface face gears[J]. Applied Mechanics and Materials, 2012, 163: 233-237.

[5] [5] Lin Z Y, Hong M H. Femtosecond laser precision engineering: from micron, submicron, to nanoscale[J]. Ultrafast Science, 2021, 2021: 9783514.

[6] [6] Davydov R V, Antonov V I. Computer simulation of femtosecond pulsed laser ablation of aluminium and copper[J]. Journal of Physics: Conference Series, 2018, 1124(8): 081037.

[7] [7] Bamoto K, Sakurai H, Tani S, et al. Autonomous parameter optimization for femtosecond laser micro-drilling[J]. Optics Express, 2022, 30(1): 243-254.

[8] [8] Zhang Z, Liu S Y, Zhang Y Q, et al. Optimization of low-power femtosecond laser trepan drilling by machine learning and a high-throughput multi-objective genetic algorithm[J]. Optics & Laser Technology, 2022, 148: 107688.

[9] [9] Bakhtiyari A N, Wu Y L, Wang L Y, et al. Laser machining sapphire via Si-sapphire interface absorption and process optimization using an integrated approach of the taguchi method with grey relational analysis[J]. Journal of Materials Research and Technology, 2023, 24: 663-674.

[10] [10] Zhang R, Huang C Z, Wang J, et al. Experimental investigation and optimization of femtosecond laser processing parameters of silicon carbide-based on response surface methodology[J]. Ceramics International, 2022, 48(10): 14507-14517.

[11] [11] Behera A, Sahu P S, Patel S K. Application of taguchi methodology for optimization of process parameters in laser bending of Al sheet[J]. Materials Today: Proceedings, 2020, 26: 2323-2327.

[12] [12] Mohanavel V, Ravichandran M, Kumar S S. Optimization of tungsten inert gas welding parameters to: attain maximum impact strength in AA6061 alloy joints using Taguchi technique[J]. Materials Today: Proceedings, 2018, 5(11): 25112-25120.

[13] [13] Wojciechowski S, Maruda R W, Krolczyk G M, et al. Application of signal to noise ratio and grey relational analysis to minimize forces and vibrations during precise ball end milling[J]. Precision Engineering, 2018, 51: 582-596.

[15] [15] Pritam A, Dash R R, Mallik R K. Predictive modeling and multi objective optimization of Al 6063 for engraving depth and surface roughness using grey relational and regression analysis[J]. Materials Today: Proceedings, 2023, 80: 3464-3470.

[16] [16] Priyadarshini M, Pattnaik S K, Mishra D, et al. Multi characteristics optimization of laser drilling process parameter using grey fuzzy reasoning method[J]. Materials Today: Proceedings, 2015, 2(4): 1518-1532.

[17] [17] Nisar L, Banday B, Amatullah M, et al. An investigation on effect of process parameters on surface roughness and dimensional inaccuracy using Grey based Taguchi method[J]. Materials Today: Proceedings, 2021, 46: 6564-6569.

[18] [18] Tarng Y S, Juang S C, Chang C H. The use of grey-based Taguchi methods to determine submerged arc welding process parameters in hardfacing[J]. Journal of Materials Processing Technology, 2002, 128(1): 1-6.

[19] [19] Deng D W, Li T S, Huang Z Y, et al. Multi-response optimization of laser cladding for TiC particle reinforced Fe matrix composite based on Taguchi method and grey relational analysis[J]. Optics & Laser Technology, 2022, 153: 108259.