[1] Mou H S. Status and progress of InSb IRFPA detector[J]. Laser & Infrared, 46, 394-399(2016).

[2] Bhan R K, Dhar V. Recent infrared detector technologies, applications, trends and development of HgCdTe based cooled infrared focal plane arrays and their characterization[J]. Opto-Electronics Review, 27, 174-193(2019).

[3] Klipstein P, Aronov D, Ezra M B, et al. Recent progress in InSb based quantum detectors in Israel[J]. Infrared Physics & Technology, 59, 172-181(2013).

[4] Bai W. Development status of InSb infrared focal plane array detectors[J]. Infrared, 40, 1-14(2019).

[5] Gui L, Meng Q D, Zhang L W, et al. Failure analysis of InSb infrared detector based on CZM[J]. Laser & Infrared, 43, 1368-1371(2013).

[6] Meng Q D, Lv Y Q, Lu Z X, et al. Stress in InSb infrared focal plane array detector analyzed with ANSYS[J]. Journal of Infrared and Millimeter Waves, 29, 431-434(2010).

[7] Meng Q D, Zhang X L, Lv Y Q, et al. Local delamination of InSb IRFPAs in liquid nitrogen shock tests[J]. Infrared Physics and Technology, 86, 207-211(2017).

[8] Alfano G, Crisfield M A. Finite element interface models for the delamination analysis of laminated composites: Mechanical and computational issues[J]. International Journal for Numerical Methods in Engineering, 50, 1701-1736(2001).

[9] Xu Y J, Guo Y Q, Lian L H, et al. A unified cohesive zone model for simulating adhesive failure of composite structures and its parameter identification[J]. Composite Structures, 182, 555-565(2017).

[10] [10] Zhou Q C. Study on the adhesive mechanical properties of hydroxylterminated polybutadiene propellantlinear interface[D]. Nanjing: Nanjing University of Science Technology, 2016. (in Chinese)

[11] Guo W, Chen P J, Yu L Y, et al. Numerical analysis of the strength and interfacial behavior of adhesively bonded joints with varying bondline thicknesses[J]. International Journal of Adhesion and Adhesives, 98, 102553(2020).

[12] Bellali M A, Mokhtari M, Benzaama H, et al. Using CZM and XFEM to predict the damage to aluminum notched plates reinforced with a composite patch[J]. Journal of Mechanics of Materials and Structures, 15, 185-201(2020).

[13] Chen K M, Jiang D S, Kao N H, et al. Effects of underfill materials on the reliability of low-K flip-chip packaging[J]. Microelectronics Reliability, 46, 155-163(2006).

[14] Zhang X L, Meng Q D, Lv Y Q, et al. Assessment of InSb infrared detector arrays assembly procedure employing ANSYS[J]. Optical and Quantum Electronics, 51, 1-8(2019).

[15] Zhang L W, Meng Q D, Zhang X L, et al. Modeling and stress analysis of large format InSb focal plane arrays detector under thermal shock[J]. Infrared Physics & Technology, 60, 29-34(2013).

[16] Camanho P P, Davila C G, De Moura M F. Numerical simulation of mixed-mode progressive delamination in composite materials[J]. Journal of Composite Materials, 37, 1415-1438(2003).

[17] Xiao Y Y, Shi W K, Han Z H, et al. Residual stress and its effect on failure in a DLC coating on a steel substrate with rough surfaces[J]. Diamond & Related Materials, 66, 23-35(2016).