[1] [1] Zhu Hongyi. Development of Nb microalloying high strength ship plate at Anyang steel［J］. Special Steel, 2009, 30(3): 50-51.

[2] [2] Li Hongmei, Cao Jianchun, Sun Lijun, et al. Current situation and development of Nb microalloyed steel carbonitride precipitation behavior［J］. Materials Review, 2010, 24(9): 84-87.

[3] [3] Picon C A, Fernandes F A P, Rodrigues C A D, et al. Study of pitting corrosion mechanisms in sea water of supermartensitic stainless steels microalloyed with Nb and Ti［J］. Heat Treatment, 2010, 25(1): 25-29.

[4] [4] Wang Xiaonan, Du Linxiu, Di Hongshuang. Study on fatigue property of new type hot-rolled nano precipitation strengthening ultra-high strength automobile strip［J］. Journal of Mechanical Engineering, 2012, 48(22): 27-33.

[5] [5] Wu Huachun, Li Mingyao, Jiang Qi, et al. Survey study on development of automobile body sheet domestic and overseas［J］. Machinery Design & Manufacture, 2011(7): 254-256.

[6] [6] Dawes C T. Laser welding: A practical guide［M］. Cambridge: Woodhead Publishing, 1992.

[7] [7] Sun Z, Ion J C. Laser-welding of dissimilar metal combinations［J］. Journal of Materials Science, 1995, 30(17): 4205-4214.

[8] [8] Li Mingxing, Hu Zhihua, Chen Kai. The effect of shielding gas type on laser weldability of galvanized steel［J］. Laser Journal, 2006, 27(6): 72-73.

[9] [9] Yin Feng, Liu Hongwei, Tao Yongshun. The influence of shielding gas composition on GMAW in performance［J］. Welding Digest of Machinery Manufacturing, 2011(6): 37-40.

[10] [10] Sathiya P, Jaleel M Y A. Influence of shielding gas mixtures on bead profile and microstructural characteristics of super austenitic stainless steel weldments by laser welding［J］. The International Journal of Advanced Manufacturing Technology, 2010, 54(5): 525-535.

[11] [11] Kah P, Martikainen J. Influence of shielding gases in the welding of metals［J］. The International Journal of Advanced Manufacturing Technology, 2013, 64(9): 1411-1421.

[13] [13] Xiao Rongshi, Mei Hanhua, Zuo Tiechuan. Influence of assistant gases on the shielding thresholds of laser induced plasma during high power CO2 laser penetration welding［J］. Chinese J Lasers, 1998, 25(11): 1045-1050.

[14] [14] Lee J L, Pan Y T. The formation of intragranular acicular ferrite in simulated heat-affected zone［J］. ISIJ International, 1995, 35(8): 1027-1031.

[16] [16] Mills A R, Thewlis G, Whiteman J A. Nature of inclusions in steel weld metals and their influence on formation of acicular ferrite［J］. Materials Science and Technology, 1987, 3(12): 1051-1061.

[17] [17] Yamamoto K, Hasegawa T, Takamura J. Effect of boron on intragranular ferrite formation in Ti-oxide bearing steels［J］. ISIJ International, 1996, 36(1): 80-86.

[18] [18] Yamada T, Terasak H, Komizo Y. Relation between inclusion surface and acicular ferrite in low carbon alloy steel weld［J］. ISIJ International, 2009, 49(7): 1059-1062.

[19] [19] Pavlina E J, van Tyne C J. Correlation of yield strength and tensile strength with hardness for steels［J］. Journal of Materials Engineering and Performance, 2008, 17(6): 888-893.

[21] [21] Cong Dazhi, Zhang Xiaoning. Research on effect of acicular ferrite on properties of SA738Gr.B steel with submerged arc welding［J］. Hot Working Technology, 2015, 44(21): 31-35.