[1] Zheng H, Zhao X Y. Lightweight automobile and application of aluminum alloys in modern automobile production[J]. Forging & Stamping Technology, 41, 1-6(2016).

[2] Yu Z H. Research on microstructure and mechanical properties of friction stir welded joints for 7075 high strength aluminum alloy[D](2020).

[3] Chen Y M. Research on pre-welding laser cleaning of aluminum alloy and evaluation[D](2018).

[4] Wang Q, Guan Y C, Cong B Q et al. Laser cleaning of commercial Al alloy surface for tungsten inert gas welding[J]. Journal of Laser Applications, 28, 022507(2016).

[5] AlShaer A W, Li L, Mistry A. The effects of short pulse laser surface cleaning on porosity formation and reduction in laser welding of aluminium alloy for automotive component manufacture[J]. Optics & Laser Technology, 64, 162-171(2014).

[6] Yousaf D, Bashir S, Akram M et al. Laser irradiation effects on the surface, structural and mechanical properties of Al-Cu alloy 2024[J]. Radiation Effects and Defects in Solids, 169, 144-156(2014).

[7] Zheng B X, Jiang G D, Wang W J et al. Surface ablation and threshold determination of AlCu4SiMg aluminum alloy in picosecond pulsed laser micromachining[J]. Optics & Laser Technology, 94, 267-278(2017).

[8] Zhu G D, Wang S R, Cheng W et al. Investigation on the surface properties of 5A12 aluminum alloy after Nd∶YAG laser cleaning[J]. Coatings, 9, 578(2019).

[9] Shi T Y, Wang C M, Mi G Y et al. A study of microstructure and mechanical properties of aluminum alloy using laser cleaning[J]. Journal of Manufacturing Processes, 42, 60-66(2019).

[10] Zhang G X, Hua X M, Li F et al. Effect of laser cleaning process parameters on the surface roughness of 5754-grade aluminum alloy[J]. The International Journal of Advanced Manufacturing Technology, 105, 2481-2490(2019).

[11] Zhang G X, Hua X M, Huang Y et al. Investigation on mechanism of oxide removal and plasma behavior during laser cleaning on aluminum alloy[J]. Applied Surface Science, 506, 144666(2020).

[12] Liu B W, Mi G Y, Wang C M. Study on surface state and thermophysical properties of TA15 alloy by laser ablation[J]. Journal of Manufacturing Processes, 62, 483-490(2021).

[13] Liu B W, Mi G Y, Wang C M. Research on grain refinement and wear behavior of micro-remelted TA15 alloy surface by laser cleaning[J]. Materials Chemistry and Physics, 259, 124022(2021).

[14] Liu B W, Mi G Y, Wang C M. Study on the morphology and microstructure of 5A06 alloy by high-pulse-frequency pulsed laser micro polishing[J]. Materials Chemistry and Physics, 255, 123500(2020).

[15] Wang G. Study on effect of pulse laser cleaning on surface morphology and welding quality of aluminum alloy[D](2018).

[16] Dong W Q. Influence of removal of anodic oxide film from 5083 aluminum alloy by laser cleaning on the welding quality of laser welding[D](2018).

[17] Huang J Y. Research on pretreatment mechanism and experiment of 6061 aluminum alloy by nanosecond laser before welding[D](2018).

[18] Ang L K, Lau Y Y, Gilgenbach R M et al. Analysis of laser absorption on a rough metal surface[J]. Applied Physics Letters, 70, 696-698(1997).

[19] Wang X, Xu M Y, Wang Z W et al. Properties of jet-plated Ni coating on Ti alloy (Ti6Al4V) with laser cleaning pretreatment[J]. Metals, 9, 248(2019).

[20] Maroofi A, Navab S N, Ghomi H. Atmospheric air plasma jet for improvement of paint adhesion to aluminum surface in industrial applications[J]. International Journal of Adhesion and Adhesives, 98, 102554(2020).

[21] Luo A H. Study on heat flow coupling and heat convecting of resistance spot welding electrode[D](2007).

[22] Zhang X Y. Research on failure mechanism and control methods of interfacial fracture mode for dual phase steel welds[D](2008).

[23] Guo L Y, Geng S N, Gao X S et al. Numerical simulation of heat transfer and fluid flow during nanosecond pulsed laser processing of Fe78Si9B13 amorphous alloys[J]. International Journal of Heat and Mass Transfer, 170, 121003(2021).