[1] Cheng X N, Dai Q X[M]. Austenite steel design and control, 4-5(2005).

[2] Duan X X, Gao S Y, Gu Y F et al. Study on reinforcement mechanism and frictional wear properties of 316L-SiC mixed layer deposited by laser cladding[J]. Chinese Journal of Lasers, 43, 0103004(2016).

[3] Kruth J P. Froyen L, van Vaerenbergh J, et al. Selective laser melting of iron-based powder[J]. Journal of Materials Processing Technology, 149, 616-622(2004).

[4] Cardaropoli F, Caiazzo F[J]. Sergi V. Evolution of direct selective laser sintering of metals. Advanced Materials Research, 383/390, 6252-6257(2011).

[5] Wang X C, Laoui T, Bonse J et al. Direct selective laser sintering of hard metal powders: experimental study and simulation[J]. The International Journal of Advanced Manufacturing Technology, 19, 351-357(2002). http://www.emeraldinsight.com/servlet/linkout?suffix=b12&dbid=16&doi=10.1108%2F13552540710750924&key=10.1007%2Fs001700200024

[6] Prashanth K G, Debalina B, Wang Z et al. Tribological and corrosion properties of Al-12Si produced by selective laser melting[J]. Journal of Materials Research, 29, 2044-2054(2014). http://journals.cambridge.org/abstract_S0884291414001332

[7] Hufenbach J, Giebeler L, Hoffmann M et al. Effect of short-term tempering on microstructure and mechanical properties of high-strength FeCrMoVC[J]. Acta Materialia, 60, 4468-4476(2012). http://www.sciencedirect.com/science/article/pii/S1359645412002972

[8] Tolochko N K, Mozzharov S E, Yadroitsev I A et al. Balling processes during selective laser treatment of powders[J]. Rapid Prototyping Journal, 10, 78-87(2004). http://www.emeraldinsight.com/doi/full/10.1108/13552540410526953

[9] Thijs L, Kempen K, Kruth J P et al. Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder[J]. Acta Materialia, 61, 1809-1819(2013). http://www.sciencedirect.com/science/article/pii/S1359645412008592

[10] Ma M M, Wang Z M, Wang D Z et al. Control of shape and performance for direct laser fabrication of precision large-scale metal parts with 316L stainless steel[J]. Optics & Laser Technology, 45, 209-216(2013). http://www.sciencedirect.com/science/article/pii/S0030399212003167

[11] Yang J, Liu Y D, Shi W T et al. Optimization and performance study of laser melting process in large layer thickness 316L[J]. Laser & Optoelectronics Progress, 56, 011401(2019).

[12] Simchi A. Effect of C and Cu addition on the densification and microstructure of iron powder in direct laser sintering process[J]. Materials Letters, 62, 2840-2843(2008). http://www.sciencedirect.com/science/article/pii/S0167577X08000840

[13] Kruth J P, Badrossannay M, Yasa E. Part and material properties in selective laser melting of metals[C]. Proceedings of the 16th International Symposium on Electromachining, 3-14(2010).

[14] Gu D D, Shen Y F. Balling phenomena in direct laser sintering of stainless steel powder: metallurgical mechanisms and control methods[J]. Materials & Design, 30, 2903-2910(2009). http://www.sciencedirect.com/science/article/pii/S0261306909000181

[15] Wang D, Song C H, Yang Y Q et al. Investigation of crystal growth mechanism during selective laser melting and mechanical property characterization of 316L stainless steel parts[J]. Materials & Design, 100, 291-299(2016). http://www.sciencedirect.com/science/article/pii/S0264127516303951

[16] Ahmadi A, Mirzaeifar R, Moghaddam N S et al. Effect of manufacturing parameters on mechanical properties of 316L stainless steel parts fabricated by selective laser melting: a computational framework[J]. Materials & Design, 112, 328-338(2016). http://www.sciencedirect.com/science/article/pii/S0264127516312175

[17] Liu J H, Shi Y S, Chen K H et al. Fabrication of alloy parts by composite powders via selective laser sintering[J]. Journal of Huazhong University of Science and Technology(Nature Science Edition), 34, 83-85(2006).

[18] Kruth J P. Froyen L, van Vaerenbergh J, et al. Selective laser melting of iron-based powder[J]. Journal of Materials Processing Technology, 149, 616-622(2004).

[19] Liu T T, Zhang C D, Liao W H et al. Experimental analysis of pool behavior in overhang structure fabricated by selective laser melting[J]. Chinese Journal of Lasers, 43, 1202004(2016).

[20] Kruth J P. Mercelis P, van Vaerenbergh J, et al. Binding mechanisms in selective laser sintering and selective laser melting[J]. Rapid Prototyping Journal, 11, 26-36(2005).

[21] Suryawanshi J, Prashanth K G, Ramamurty U. Mechanical behavior of selective laser melted 316L stainless steel[J]. Materials Science and Engineering A, 696, 113-121(2017). http://www.sciencedirect.com/science/article/pii/S0921509317305105

[22] Xiao D M, Yang Y Q, Su X B et al. Topology optimization of microstructure and selective laser melting fabrication for metallic biomaterial scaffolds[J]. Transactions of Nonferrous Metals Society of China, 22, 2554-2561(2012). http://www.sciencedirect.com/science/article/pii/S1003632611615008

[23] Blackwell P L. The mechanical and microstructural characteristics of laser-deposited IN718[J]. Journal of Materials Processing Technology, 170, 240-246(2005). http://www.sciencedirect.com/science/article/pii/S0924013605005492

[24] Wang D, Yang Y Q, He X R et al. Fiber laser selective melting of 316L stainless steel powder[J]. High Power Laser and Particle Beams, 22, 1881-1886(2010).