[1] [1] Xiao H, Chen Y, Liu M, et al. Influence of laser additive manufacturing and laser polishing on microstructures and mechanical properties of high-strength maraging steel metal materials［J］. Appl. Sci., 2022, 12: 10340.

[4] [4] Manco E, Cozzolino E, Astarita A. Laser polishing of additively manufactured metal parts: a review［J］. Surface Engineering, 2022, 38(3): 217-233.

[5] [5] ?wik?a M, Dziedzic R, Reiner J. Influence of overlap on surface quality in the laser polishing of 3D printed inconel 718 under the effect of air and argon［J］. Materials, 2021, 14: 1479.

[6] [6] Richter B, Radel T, Pfefferkorn F E. Sensitivity of surface roughness to laser parameters used for polishing additively manufactured Co-Cr alloy［J］. Surface & Coatings Technology, 2022, 451: 128872.

[7] [7] Solheid J S, Elkaseer A, Wunsch T, et al. Multiobjective optimization of laser polishing of additively manufactured Ti-6Al-4V parts for minimum surface roughness and heat-affected zone［J］. Materials, 2022, 15: 3323.

[8] [8] Xu Z, Ouyang W, Liu Y, et al. Effects of laser polishing on surface morphology and mechanical properties of additive manufactured TiAl components［J］. Journal of Manufacturing Processes, 2021, 65: 51-59.

[9] [9] Liu Y, Ouyang W, Wu H, et al. Improving surface quality and superficial microstructure of LDED Inconel 718 superalloy processed by hybrid laser polishing［J］. Journal of Materials Processing Tech., 2022, 300: 117428.

[10] [10] Zhao Y, Du C, Wang P, et al. The mechanism of In-Situ laser polishing and its effect on the surface quality of nickel-based alloy fabricated by selective laser melting［J］. Metals, 2022, 12: 778.

[11] [11] Li J, Zuo D. Laser polishing of additive manufactured Ti6Al4V alloy: A review ［J］. Optical Engineering, 2021, 60(2): 020901.

[12] [12] Gisario A, Barletta M, Veniali F. Laser polishing: A review of a constantly growing technology in the surface finishing of components made by additive manufacturing［J］. The International Journal of Advanced Manufacturing Technology, 2022, 120: 1433-1472.

[13] [13] Ramos J A, Bourell D L, Beaman J J. Surface over-melt during laser polishing of indirect-SLS metal parts［J］. Mat. Res. Soc. Symp. Proc., 2003, 758: LL1.9.

[14] [14] Xu J, Zou P, Kang D, et al. Theoretical and experimental study of bulge formation in laser polishing of 304 stainless steel［J］. Journal of Manufacturing Processes, 2021, 66: 39-52.

[15] [15] Xu J, Zou P, Kang D, et al. Research on the formation mechanism of the surface structure in transition regime of laser polishing 304 stainless steel［J］. Optics & Laser Technology, 2022, 149: 107906.

[17] [17] Kumstel J. Laser polishing of metallic freeform surfaces byusing a dynamic laser beam preforming system［J］. J. Laser Appl., 2021, 33: 022020.

[21] [21] Gao Y, Wu B, Zhou Y, Tao S. A two-step nanosecond laser surface texturing process with smooth surface finish［J］. Applied Surface Science, 2011, 257: 9960-9967.

[22] [22] Li J, Zou Z, Hu L, Jin W. Discussion of the paper: Surface texturing by pulsed Nd: YAG laser［J］. Tribology International, 2017, 115: 1-2.

[23] [23] Vilhena L M, Sedla?ek M, Podgornik B, et al. Surface texturing by pulsed Nd: YAG laser［J］. Tribology International, 2009, 42(10): 1496-1504.