[1] Zhang W, Guo Y M, Chen Y X. Applications and future development of thermal spraying technologies for remanufacturing engineering[J]. China Surface Engineering, 24, 1-10(2011).

[2] Lin X, Xue L, Chen J et al[J]. Laser forming repair of titanium alloy parts Aeronautical Manufacturing Technology, 2010, 55-58.

[3] Song L J, Zeng G C, Xiao H et al. Repair of 304 stainless steel by laser cladding with 316L stainless steel powders followed by laser surface alloying with WC powders[J]. Journal of Manufacturing Processes, 24, 116-124(2016).

[4] Zhang F Y, Zhao H Y, Liu T et al. Influence of groove angle on the metallurgical defects of laser deposition repair 316L stainless steel[J]. Applied Laser, 37, 169-174(2017).

[5] Dong S Y, Yan S X, Xu B S et al. Laser cladding remanufacturing technology of cast iron cylinder head and its quality evaluation[J]. Journal of Academy of Armored Force Engineering, 27, 90-93(2013).

[6] Wang W, Pinkerton A J, Wee L M et al. Component repair using laser direct metal deposition[M]. ∥Proceedings of the 35th International MATADOR Conference. London: Springer, 345-350(2007).

[7] Wen P, Zheng S Q, Shinozaki K et al. Experimental research on laser narrow gap welding with filling hot wire[J]. Chinese Journal of Lasers, 38, 1103004(2011).

[8] Zhang X C, Pan T, Li W et al. Experimental characterization of a direct metal deposited cobalt-based alloy on tool steel for component repair[J]. JOM, 71, 946-955(2019).

[9] Sun Z, Wang L, Hu Y et al. Study on the pore defect of V narrow groove repaired via laser metal deposition with electric-magnetic compound field. C]∥The 17th National Academic Conference on Special Processing. Beijing: Chinese Mechanical Engineering Society, 152(2017).

[10] Yao J H[J]. Research progress and future prospect of laser hybrid manufacturing technologyElectromachining & Mould, 2017, 4-11.

[11] Schneider A, Avilov V, Gumenyuk A et al. Laser beam welding of aluminum alloys under the influence of an electromagnetic field[J]. Physics Procedia, 41, 4-11(2013).

[12] Bachmann M, Avilov V, Gumenyuk A et al. About the influence of a steady magnetic field on weld pool dynamics in partial penetration high power laser beam welding of thick aluminium parts[J]. International Journal of Heat and Mass Transfer, 60, 309-321(2013).

[13] Bachmann M, Avilov V, Gumenyuk A et al. Experimental and numerical investigation of an electromagnetic weld pool support system for high power laser beam welding of austenitic stainless steel[J]. Journal of Materials Processing Technology, 214, 578-591(2014).

[14] Xie D Q. The process research on pulsed current assisted laser rapid prototyping nickel-based super-alloy[D]. Nanjing: Nanjing University of Aeronautics and Astronautics(2014).

[15] Qi Y, Chen G Y. Root defects in full penetration laser welding of thick plates using steady electromagnetic force[J]. Journal of Materials Processing Technology, 260, 97-103(2018).

[16] Hu Y, Wang L, Li J H et al. Effect of directional Lorentz force on molten pool exhaust in laser cladding[J]. Chinese Journal of Lasers, 45, 0802001(2018).

[17] Wang L, Hu Y, Lin Y H et al. Distribution gradient control of laser melt injection reinforcement particles by electromagnetic compound field[J]. Chinese Journal of Lasers, 45, 1002001(2018).

[18] Zhang N, Liu W W, Deng D W et al. Effect of electric-magnetic compound field on the pore distribution in laser cladding process[J]. Optics & Laser Technology, 108, 247-254(2018).

[19] Zhang Q L, Li D, Zhang J et al. Influence of pre-fabricated groove angle on microstructure and properties of laser additive remanufactured IN718 alloy[J]. Surface Technology, 48, 90-96(2019).

[20] Leenov D, Kolin A. Theory of electromagnetophoresis. I. magnetohydrodynamic forces experienced by spherical and symmetrically oriented cylindrical particles[J]. The Journal of Chemical Physics, 22, 683-688(1954).