[1] Li B, Chen J, Wang W G et al. High power anti-missile laser weapons for aerial defense[J]. Chinese Optics, 5, 352-357(2012).

[2] Gan F X. Review the emergence and development of laser technology in early stage in China[J]. Chinese Journal of Lasers, 37, 2183-2187(2010).

[3] Li J, Zhang J D, Zhang Y Z et al. Development and characterization of high-temperature and laser ablation resistant coating[J]. Journal of Aeronautical Materials, 34, 34-38(2014).

[4] Chen J M, Liu X, Xiao Z X et al. Thermal shock behavior of doped graphites tested by high energy laser beam and electron beam[J]. Chinese Journal of Nuclear Science and Engineering, 22, 47-52(2002).

[5] Li Y, Ling X, Wang G et al. Improvement of the laser-induced damage resistance of optical coatings in vacuum environments[J]. Optik, 124, 5154-5157(2013). http://www.sciencedirect.com/science/article/pii/S0030402613003665

[6] Li D R, Wang F C, Ma Z et al. Mechanism of thermal shock damage by laser irradiation on TiO2 ceramic coating[J]. Rare Metal Materials and Engineering, 36, 527-529(2007).

[7] Zeng Y, Zhang Y F, Ding C X. Thermal shock behavior of plasma sprayed boron carbide coatings[J]. Journal of the Chinese Ceramic Society, 27, 545-550(1999).

[8] Niu Y X, Huang F, Duan X F et al. Thermal shock effect on diamond-like carbon thin films induced by pulsed-laser[J]. Acta Physica Sinica, 54, 4816-4821(2005).

[9] Jiang L Y, Lu Y D, Xin J G. Experimental study on the anti-damage characteristic of several different coatings for CO2 laser[J]. Laser & Infrared, 41, 298-301(2011).

[10] Zhang T Y, Kong B, Chen M S et al. Anti-laser performance test of aluminum alloy plates reinforced by ceramic coating[J]. Infrared and Laser Engineering, 46, 50-55(2017).

[11] Liang L P, Zhang L, Sheng Y G et al. Studies on the laser-induced damage resistance of sol-gel derived ZrO2-TiO2 composite high refractive index films[J]. Acta Physica Sinica, 56, 3596-3601(2007).

[12] Ling X, Liu X F, Wang G et al. Influence of oxygen partial pressure on laser-induced damage resistance of ZrO2 films in vacuum[J]. Vacuum, 119, 145-150(2015). http://www.sciencedirect.com/science/article/pii/S0042207X15002328

[13] Ma C, Ma Z, Gao L H et al. Laser damage mechanism of flake graphite modified phenolic resin coating[J]. Chinese Optics, 10, 249-255(2017).

[14] Zou Y, Zhao L L, You L J et al. Preparation and numerical simulation investigation of high reflectance anti-laser ablation coating[J]. Journal of Inorganic Materials, 31, 869-875(2016).

[15] Wang N, Zhao W X, Wang P et al. Nanostructured thermal barrier coatings by APS and EB-PVD and their properties[J]. Journal of Aeronautical Materials, 26, 157-162(2006).

[16] Hao Y F, Tang W J, Wang H Y et al. Analysis of microstructure and thermal shock resistance of nanostructured zirconia thermal barrier coatings[J]. Transactions of the China Welding Institution, 31, 109-112(2010).

[17] Cho B, Lyu A. Laser-induced damage resistance of 266 nm AR coatings[J]. Proceedings of SPIE, 8885, 888524(2013). http://spie.org/Publications/Proceedings/Paper/10.1117/12.2030738

[18] Wang H Y, Tang W J, Li Z J et al. Investigation of thermal shock resistance of the nanostructured zirconia thermal barrier coatings treated by laser glazing[J]. Transactions of the China Welding Institution, 35, 91-94(2014).

[19] Chai Y, Zhu M, Yi K et al. Experimental demonstration of laser damage caused by interface coupling effects of substrate surface and coating layers[J]. Optics Letters, 40, 3731-3734(2015). http://www.ncbi.nlm.nih.gov/pubmed/26274646

[20] Qiu S R, Wolfe J E, Feit M D et al. Impact of substrate surface scratches on the laser damage resistance of multilayer coatings[J]. Proceedings of SPIE, 7842, 78421X(2010). http://proceedings.spiedigitallibrary.org/data/Conferences/SPIEP/1808/78421X_1.pdf

[21] Sun L, Liu H, Huang J et al. Reaction ion etching process for improving laser damage resistance of fused silica optical surface[J]. Optics Express, 24, 199-204(2016). http://europepmc.org/abstract/MED/26832251

[22] Wolfe J E, Qiu S R, Stolz C J. Fabrication of mitigation pits for improving laser damage resistance in dielectric mirrors by femtosecond laser machining[J]. Applied Optics, 50, 457-462(2011). http://europepmc.org/abstract/MED/21460980

[23] Schiltz D, Patel D, Emmert L et al. Modification of multilayer mirror top-layer design for increased laser damage resistance[J]. Proceedings of SPIE, 9237, 92371G(2014). http://proceedings.spiedigitallibrary.org/mobile/proceeding.aspx?articleid=2020461

[24] Liao W, Zhang C, Sun X. et al. Full aperture CO2 laser process to improve laser damage resistance of fused silica optical surface[J]. Advances in Condensed Matter Physics, 2014, 164-168(2014).

[25] Dai W, Xiang X, Jiang Y. et al. Surface evolution and laser damage resistance of CO2 laser irradiated area of fused silica[J]. Optics & Lasers in Engineering, 49, 273-280(2011). http://www.sciencedirect.com/science/article/pii/S0143816610002113

[26] Mikami K, Motokoshi S, Fujita M et al. Temperature dependences of laser-induced damage resistance for dielectric materials[J]. IEEJ Transactions on Electronics, Information and Systems, 132, 83-88(2012). http://adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=2012ITEIS.132...83M&db_key=PHY&link_type=ABSTRACT

[27] Yang M H, Zhao Y A, Su H H et al. Influence of subsurface cracks on laser damage resistance of anti-reflection coated fused silica[J]. Chinese Journal of Lasers, 39, 0807001(2012).

[28] Žukauskas A. Batavi iūt G, Š iuka M, et al. Characterization of photopolymers used in laser 3D micro/nano-lithography by means of laser-induced damage threshold [J]. Optical Materials Express, 4, 1601-1616(2014).

[29] Vanda J, Evcík J, Pupka E et al. Comparative LIDT measurements of optical components for high-energy HiLASE lasers[J]. High Power Laser Science and Engineering, 4, 11-20(2016). http://www.opticsjournal.net/Articles/Abstract?aid=OJ161025000033JfLiOl

[30] Li P, Hang L X, Xu J Q et al. Laser-induced damage resist properties of monolayer optical thin films prepared by PECVD technology[J]. Journal of Applied Optics, 36, 206-213(2015).

[31] Xu C, Xu L M, Zhang H Z et al. Comparative studies on the laser damage resistance of Ta2O5 and Nb2O5 films performed under different electron beam currents[J]. Chinese Physics Letters, 28, 064211(2011).

[32] Xing H, Zhu M, Chai Y et al. Improving laser damage resistance of 355 nm high-reflective coatings by co-evaporated interfaces[J]. Optics Letters, 41, 1253-1256(2016). http://www.ncbi.nlm.nih.gov/pubmed/26977682

[33] Mende M, Balasa I, Ehlers H et al. Relation of optical properties and femtosecond laser damage resistance for Al2O3/AlF3 and Al2O3/SiO2 composite coatings[J]. Applied Optics, 53, 383-391(2014). http://europepmc.org/abstract/med/24514242

[34] Wolf R, Zscherpe G, Welsch E et al. Absorption-influenced laser damage resistance of Ta2O5 coatings[J]. Optica Acta, 33, 919-924(1986). http://www.tandfonline.com/doi/abs/10.1080/713822037

[35] Mende M, Schrameyer S, Ehlers H et al. Laser damage resistance of ion-beam sputtered Sc2O3/SiO2 mixture optical coatings[J]. Applied Optics, 52, 1368-1406(2013). http://europepmc.org/abstract/MED/23458787

[36] Liang L, Yao X, Lei Z et al. Annealing effect on the optical properties and laser-induced damage resistance of solgel-derived ZrO2 films[J]. Journal of the Optical Society of America B, 24, 1066-1074(2007). http://www.opticsinfobase.org/abstract.cfm?id=132501

[37] Suratwala T I, Miller P E, Bude J D et al. HF-based etching processes for improving laser damage resistance of fused silica optical surfaces[J]. Journal of the American Ceramic Society, 94, 416-428(2010). http://onlinelibrary.wiley.com/doi/10.1111/j.1551-2916.2010.04112.x/pdf

[38] Sun J, Li X, Zhang W et al. Laser-induced damage resistance of AlF3 films[J]. Proceedings of SPIE, 8786, 878620(2013). http://proceedings.spiedigitallibrary.org/mobile/proceeding.aspx?articleid=1710724

[39] Chen S, Li D, He H et al. Effects of electric field distribution and pulse duration on the ultra-short pulse laser damage resistance of laser coatings[J]. Proceedings of SPIE, 7842, 78420D(2010). http://proceedings.spiedigitallibrary.org/proceeding.aspx?articleid=1347960

[40] Zhao D F, Wu R, Lin Z Q et al. Acid etching combined with ultrasonic for improving laser damage threshold of fused silica[J]. High Power Laser & Particle Beams, 27, 105-110(2015).

[41] Hu G, Yang M, Shao J et al. Influence of subsurface defects on 355 nm laser damage resistance of monolayer and multilayer coatings[J]. Proceedings of SPIE, 7504, 75040D(2009). http://proceedings.spiedigitallibrary.org/data/Conferences/SPIEP/10292/75040D_1.pdf

[42] Nguyen H T, Britten J A. Improvement of laser damage resistance and diffraction efficiency of multilayer dielectric diffraction gratings by HF etchback linewidth tailoring[J]. Proceedings of SPIE, 7842, 78421H(2010). http://spie.org/Publications/Proceedings/Paper/10.1117/12.867921

[43] Chen X, Zhao L, Fu X et al. Effect of oxygen vacancies on the laser-induced damage resistance of Y0.26Hf0.74Ox thin films[J]. Optics Letters, 39, 6470-6473(2014). http://www.opticsinfobase.org/ol/upcoming_pdf.cfm?id=221941

[44] Yu Z K, He H B, Qi H J et al. Characteristics of 355 nm laser damage in bulk materials[J]. Chinese Physics Letters, 30, 067801(2013). http://adsabs.harvard.edu/abs/2013ChPhL..30f7801Y

[45] Cheng J, Chen M, Liao W et al. Influence of surface cracks on laser-induced damage resistance of brittle KH2PO4 crystal[J]. Optics Express, 22, 28740-28755(2014).

[46] Lv L, Ma P, Huang J Y et al. Research on laser-induced damage resistance of fused silica optics by the fluid jet polishing method[J]. Applied Optics, 55, 2252-2258(2016). http://www.ncbi.nlm.nih.gov/pubmed/27140559

[47] Mangote B, Gallais L, Commandré M et al. Femtosecond laser damage resistance of oxide and mixture oxide optical coatings[J]. Optics Letters, 37, 1478-1480(2012). http://europepmc.org/abstract/med/22555710

[48] Gallais L, Cheng X, Wang Z. Influence of nodular defects on the laser damage resistance of optical coatings in the femtosecond regime[J]. Optics Letters, 39, 1545-1548(2014). http://europepmc.org/abstract/med/24690834

[49] Li X G, Gross M, Oreb B et al. Increased laser-damage resistance of sol-gel silica coating by structure modification[J]. The Journal of Physical Chemistry, 116, 18367-18371(2012). http://pubs.acs.org/doi/abs/10.1021/jp307390u

[50] Cheng X F, Miao X X, Wang H B et al. Surface contaminant control technologies to improve laser damage resistance of optics[J]. Advances in Condensed Matter Physics, 2014, 210-216(2014).

[51] Negres R A, Bass I, Stanion K A et al. Apparatus and techniques for measuring laser damage resistance of large-area, multilayer dielectric mirrors for use with high energy, picosecond lasers. [C]∥Lasers and Electro-Optics. IEEE, 1-2(2015).

[52] Nguyen D N, Emmert L, Rudolph W et al. The reduction of laser damage resistance of optical coatings to sub-picosecond pulse trains under vacuum. [C]∥Lasers and Electro-Optics, IEEE, 1-2(2011).

[53] Liu W W, Wei Z Y, Yi K et al. Post-processing treatments to improve the laser damage resistance of fused silica optical surfaces and SiO2 coatings[J]. Chinese Optics Letters, 13, 041407(2015). http://www.opticsjournal.net/Articles/Abstract?aid=OJ150416000076dJfMiP

[54] Natoli J Y, Wagner F, Gallais L et al. Relevance of the choice of diagnostic methods to investigate laser damage resistance in optical material[J]. Proceedings of SPIE, 8206, 82061J(2011). http://spie.org/Publications/Proceedings/Paper/10.1117/12.910429