[1] [1] ALIGIZAKI K K. Pore structure of cement-based materials: testing, interpretation and requirements[M]. London: Taylor & Francis, 2006.

[2] [2] ODLER I. Strength of cement (final report)[J]. Mater Struct, 1991, 24(2): 143–157.

[3] [3] BEAUDOIN J J, FELDMAN R F, TUMIDAJSKI P J. Pore structure of hardened Portland cement pastes and its influence on properties[J]. Adv Cem Based Mater, 1994, 1(5): 224–236.

[5] [5] POWERS T C. Structure and physical properties of hardened Portland cement paste[J]. J Am Ceram Soc, 1958, 41(1): 1–6.

[6] [6] PANN K S, YEN T,TANG C W, et al. New strength model based on water-cement ratio and capillary porosity[J]. ACI Mater J, 2003, 100(4): 311–318.

[7] [7] VERBECK G, HELMUTH R A. Structures and physical properties of cement pastes[C]. Proceedings of Proceedings of 5th International Symposium on the Chemistry of Cement. Tokyo, 1968: 1–31.

[8] [8] GALLE C. Effect of drying on cement-based materials pore structure as identified by mercury intrusion porosimetry: A comparative study between oven-, vacuum-, and freeze-drying[J]. Cem Concr Res, 2001, 31(10): 1467–1477.

[9] [9] SNOECK D, VELASCO L F, MIGNON A, et al. The influence of different drying techniques on the water sorption properties of cement-based materials[J]. Cem Concr Res, 2014, 64: 54–62.

[10] [10] ZHOU C S, REN F Z, WANG Z D, et al. Why permeability to water is anomalously lower than that to many other fluids for cement-based material?[J]. Cem Concr Res, 2017, 100: 373–384.

[13] [13] JENNINGS H M, TENNIS P D. Model for the developing microstructure in Portland cement pastes[J]. J Am Ceram Soc, 1994, 77(12): 3161–3172.

[15] [15] ZHOU C S, ZHANG X Y, WANG Z D, et al. Water sensitivity of cement-based materials[J]. J Am Ceram Soc, 2021, 104(9): 4279–4296.

[16] [16] BOGNER A, SCHATZ J, DEHN F, et al. Influence of drying on the microstructure of hardened cement paste: A mercury intrusion porosimetry, nitrogen sorption and SAXS study[J]. J Adv Concr Technol, 2020, 18(3): 83–94.

[20] [20] ZHOU C S, REN F Z, ZENG Q, et al. Pore-size resolved water vapor adsorption kinetics of white cement mortars as viewed from proton NMR relaxation[J]. Cem Concr Res, 2018, 105: 31–43.

[21] [21] SCHULTE HOLTHAUSEN R, RAUPACH M. Monitoring the internal swelling in cementitious mortars with single-sided 1H nuclear magnetic resonance[J]. Cem Concr Res, 2018, 111: 138–146.

[22] [22] PROVENCHER S W. An eigenfunction expansion method for the analysis of exponential decay curves[J]. J Chem Phys, 1976, 64(7): 2772–2777.

[23] [23] PROVENCHER S W. A Fourier method for the analysis of exponential decay curves[J]. Biophys J, 1976, 16(1): 27–41.

[24] [24] HALPERIN W P, JEHNG J Y, SONG Y Q. Application of spin-spin relaxation to measurement of surface area and pore size distributions in a hydrating cement paste[J]. Magn Reson Imaging, 1994, 12(2): 169–173.

[26] [26] HAHN E L. Spin echoes[J]. Phys Rev, 1950, 80(4): 580–594.

[28] [28] LIAN C, ZHUGE Y, BEECHAM S. The relationship between porosity and strength for porous concrete[J]. Constr Build Mater, 2011, 25(11): 4294–4298.

[29] [29] KUMAR R, BHATTACHARJEE B. Porosity, pore size distribution and in situ strength of concrete[J]. Cem Concr Res, 2003, 33(1): 155–164.

[30] [30] MEHTA P K. Studies on blended Portland cements containing Santorin earth[J]. Cem Concr Res, 1981, 11(4): 507–518.

[32] [32] KENDALL K, HOWARD A J, BIRCHALL J D. The relation between porosity, microstructure and strength, and the approach to advanced cement-based materials[J]. Phil Trans R Soc Lond A, 1983, 310(1511): 139–153.

[33] [33] RICE R W. Mechanical Properties of Ceramics and Composites[M]. USA: CRC Press, 2000.

[34] [34] FELDMAN R F, SEREDA P J. A new model for hydrated Portland cement and its practical implications[J]. Engineering Journal of Canada, 1970, 53(8/9): 53–59.