[1] Zhou F F, Wang Y, Wang L et al. High temperature oxidation and insulation behavior of plasma-sprayed nanostructured thermal barrier coatings[J]. Journal of Alloys and Compounds, 704, 614-623(2017). http://www.sciencedirect.com/science/article/pii/S0925838817304899

[2] Wang Y Z, Li J L, Liu H Z et al. Study on thermal resistance performance of 8YSZ thermal barrier coatings[J]. International Journal of Thermal Sciences, 122, 12-25(2017).

[3] Han M, Zhou G D, Huang J H et al. Optimization selection of the thermal conductivity of the top ceramic layer in the double-ceramic-layer thermal barrier coatings based on the finite element analysis of thermal insulation[J]. Surface and Coatings Technology, 240, 320-326(2014). http://www.sciencedirect.com/science/article/pii/S0257897213012024

[4] Bernard B, Quet A, Bianchi L et al. Thermal insulation properties of YSZ coatings: suspension plasma spraying (SPS) versus electron beam physical vapor deposition (EB-PVD) and atmospheric plasma spraying (APS)[J]. Surface and Coatings Technology, 318, 122-128(2017). http://www.sciencedirect.com/science/article/pii/S0257897216304984

[5] Zhou S F, Liu J, Xiong Z et al. Research progress on improving the high-temperature oxidation resistance of MCrAlY coatings[J]. Laser & Optoelectronics Progress, 52, 120004(2015).

[6] Bakan E, Mack D E, Mauer G et al. Gadolinium zirconate/YSZ thermal barrier coatings: plasma spraying, microstructure, and thermal cycling behavior[J]. Journal of the American Ceramic Society, 97, 4045-4051(2014).

[7] Xu Z H, He L M, Mu R D et al. Double-ceramic-layer thermal barrier coatings based on La2(Zr0.7Ce0.3)2O7/La2Ce2O7 deposited by electron beam-physical vapor deposition[J]. Applied Surface Science, 256, 3661-3668(2010).

[8] Pereira J C, Zambrano J C, Rayón E et al. Mechanical and microstructural characterization of MCrAlY coatings produced by laser cladding: the influence of the Ni, Co and Al content[J]. Surface and Coatings Technology, 338, 22-31(2018). http://www.sciencedirect.com/science/article/pii/S0257897218300872

[9] Zhou S F, Dai X Q, Xiong Z et al. Functionally graded YSZ/NiCrAlY coating prepared by laser induction hybrid rapid cladding[J]. Chinese Journal of Lasers, 40, 0403004(2013).

[10] Rezanka S, Somsen C, Eggeler G et al. A TEM investigation of columnar-structured thermal barrier coatings deposited by plasma spray-physical vapor deposition (PS-PVD)[J]. Plasma Chemistry and Plasma Processing, 38, 791-802(2018). http://link.springer.com/article/10.1007/s11090-018-9898-y

[11] Zhang X F, Zhou K S, Song J B et al. Deposition and CMAS corrosion mechanism of 7YSZ thermal barrier coatings prepared by plasma spray-physical vapor deposition[J]. Journal of Inorganic Materials, 30, 287-293(2015).

[12] Yanar N M, Helminiak M, Meier G H et al. Comparison of the failures during cyclic oxidation of yttria-stabilized (7 to 8 weight percent) zirconia thermal barrier coatings fabricated via electron beam physical vapor deposition and air plasma spray[J]. Metallurgical and Materials Transactions A, 42, 905-921(2011). http://link.springer.com/article/10.1007/s11661-010-0436-7

[13] Wu J, Guo H B, Abbas M et al. Evaluation of plasma sprayed YSZ thermal barrier coatings with the CMAS deposits infiltration using impedance spectroscopy[J]. Progress in Natural Science: Materials International, 22, 40-47(2012). http://d.wanfangdata.com.cn/Periodical_zrkxjz-e201201007.aspx

[14] Schlichting K W, Padture N P, Jordan E H et al. Failure modes in plasma-sprayed thermal barrier coatings[J]. Materials Science and Engineering: A, 342, 120-130(2003). http://www.sciencedirect.com/science/article/pii/S0921509302002514

[15] Pereira J C, Zambrano J C, Tobar M J et al. High temperature oxidation behavior of laser cladding MCrAlY coatings on austenitic stainless steel[J]. Surface and Coatings Technology, 270, 243-248(2015). http://www.sciencedirect.com/science/article/pii/s0257897215001863

[16] Zeng S B, Liu Y J, Fan X Z et al. Thermal shock resistance of APS 8YSZ thermal barrier coatings on titanium alloy[J]. Journal of Thermal Spray Technology, 21, 335-343(2012).