[1] [1] YAO Y, MENG J P, MA L Y, et al. Study on hot stamping and usibor 1500P［J］. Applied Mechanics and Materials, 2013, 320: 419-425.

[2] [2] ABDULHAY B, BOUROUGA B, DESSAIN C, et al. Experimental study of heat transfer in hot stamping process［J］. International Journal of Material Forming, 2009, 2(1): 255-257.

[3] [3] THOMY C, SEEFELD T, VOLLERTSEN F. High-power fibre lasers-application potentials for welding of steel and aluminium sheet material［J］. Advanced Materials Research, 2005, 6-8: 171-178.

[4] [4] JIA J, YANG S L, NI W Y, et al. Retraction: microstructure and properties of fiber laser welded joints of ultrahigh-strength steel 22MnB5 and its dissimilar combination with Q235 steel［J］. ISIJ International, 2014, 54(12): 2881-2889.

[5] [5] CHEN P, KO M. Simulation of springback variation in forming of advanced high strength steels［J］. Journal of Materials Processing Technology, 2007, 190(1-3): 189-198.

[6] [6] HIDAKA K, TAKEMOTO Y, SENUMA T. Microstructural evolution of carbon steels in hot stamping processes［J］. ISIJ International, 2012, 52(4): 688-696.

[7] [7] REISGEN U, SCHLESER M, MOKROV O, et al. Optimization of laser welding of DP/TRIP steel sheets using statistical approach［J］. Optics & Laser Technology, 2012, 44(1): 255-262.

[8] [8] PADMANABHAN R, BAPTISTA A J, OLIVEIRA M C, et al. Effect of anisotropy on the deep-drawing of mild steel and dual-phase steel tailor-welded blanks［J］. Journal of Materials Processing Technology, 2007, 184(1-3): 288-293.

[9] [9] MOON J H, SEO P K, KANG C G. A study on mechanical properties of laser-welded blank of a boron sheet steel by laser ablation variable of Al-Si coating layer［J］. International Journal of Precision Engineering and Manufacturing, 2013, 14(2): 283-288.

[11] [11] PARK M H, SHIBATA A, TSUJI N. Effect of grain size on mechanical properties of dual phase steels composed of ferrite and martensite［J］. MRS Advances, 2016, 1(12): 811-816.

[12] [12] SAHA D C, BIRO E, GERLICH A P, et al. Fusion zone microstructure evolution of fiber laser welded press-hardened steels［J］. Scripta Materialia, 2016, 121: 18-22.

[13] [13] SAN MARTN D, PALIZDAR Y, GARCA-MATEO C, et al. Influence of aluminum alloying and heating rate on austenite formation in low carbon-manganese steels［J］. Metallurgical and Materials Transactions A, 2011, 42(9): 2591-2608.

[14] [14] WANG X N, CHEN X M, SUN Q, et al. Formation mechanism of δ-ferrite and metallurgy reaction in molten pool during press-hardened steel laser welding［J］. Materials Letters, 2017, 206: 143-145.