[1] Kan B, Wu W J, Yang Z X et al. Stress-induced hydrogen redistribution and corresponding fracture behavior of Q960E steel at different hydrogen content[J]. Materials Science and Engineering: A, 775, 138963(2020). http://www.sciencedirect.com/science/article/pii/S0921509320300526

[2] Wang S Y, Yu H, Zhou T et al. Synergetic effects of ferrite content and tempering temperature on mechanical properties of a 960MPa grade HSLA steel[J]. Materials (Basel, Switzerland), 11, E2049(2018).

[3] Bai F M, Zhou H W, Liu X H et al. Masing behavior and microstructural change of quenched and tempered high-strength steel under low cycle fatigue[J]. Acta Metallurgica Sinica (English Letters), 32, 1346-1354(2019).

[4] Luo X, Li J, Li G J. Effect of NiCrBSi content on microstructural evolution, cracking susceptibility and wear behaviors of laser cladding WC/Ni-NiCrBSi composite coatings[J]. Journal of Alloys and Compounds, 626, 102-111(2015).

[5] Li Y N, Li Z G, Wang X X et al. Fe-based wear-resistant coating on railroad switch prepared using laser cladding technology and its properties[J]. Chinese Journal of Lasers, 47, 0402009(2020).

[6] Mazaheri Tehrani H, Shoja-Razavi R, Erfanmanesh M et al. Evaluation of the mechanical properties of WC-Ni composite coating on an AISI 321 steel substrate[J]. Optics & Laser Technology, 127, 106138(2020). http://www.sciencedirect.com/science/article/pii/S0030399219323576

[7] Li M Y, Han B, Song L X et al. Enhanced surface layers by laser cladding and ion sulfurization processing towards improved wear-resistance and self-lubrication performances[J]. Applied Surface Science, 503, 144226(2020). http://www.sciencedirect.com/science/article/pii/S0169433219330429

[8] Chen J F, Li X P, Xue Y P. Friction and wear properties of laser cladding Fe901 alloy coating on 45 steel surface[J]. Chinese Journal of Lasers, 46, 0502001(2019).

[9] Yin Y, Pan C L, Zhao C et al. Formation mechanism of microstructure of laser cladding high chromium Fe-based alloy and its effect on microhardness[J]. Transactions of the China Welding Institution, 40, 114-120, 166(2019).

[10] Yuan X, Wang J, Zhu Q H et al. Microstructure and abrasion resistance of Fe-based and Co-based coatings of AISI H13[J]. Transactions of the China Welding Institution, 39, 105-109, 133(2018).

[11] Yi W, Chen H, Wu Y et al. Effect of in situ NbC on microstructure and wear properties of laser cladding Co-based coatings[J]. Chinese Journal of Lasers, 47, 0302010(2020).

[12] Zou Y, Ma B H, Cui H C et al. Microstructure, wear, and oxidation resistance of nanostructured carbide-strengthened cobalt-based composite coatings on Invar alloys by laser cladding[J]. Surface and Coatings Technology, 381, 125188(2020).

[13] Li M Y, Han B, Wang Y et al. Study on microstructure and property of laser cladded Ni-WC/Cr3C2 coating[J]. Transactions of the China Welding Institution, 37, 17-21,129-130(2016).

[14] Xu G J, Li C G, Guo Y Q et al. Organization of clad layer using mixed powder of Stellite 6 and VC[J]. Transactions of the China Welding Institution, 38, 73-78, 132(2017).

[15] Cao J, Lu H F, Lu J Z et al. Effects of tungsten carbide particles on microstructure and wear resistance of hot-working die prepared via laser cladding[J]. Chinese Journal of Lasers, 46, 0702001(2019).

[16] Yu H, Zhang D D, Xiao R T et al. Effect of tempering temperature on the structural properties of precipitates in Q960 steel[J]. Journal of University of Science and Technology Beijing, 33, 715-720(2011).

[17] Li D H, Xu Y N, Xu H et al. Analysis on microstructure and mechanical properties of 960MPa deposited metal[J]. Welding & Joining, 2017, 44-47, 71.

[18] Zhang P X, Pang Y B, Yu M W. Effects of WC particle types on the microstructures and properties of WC-reinforced Ni60 composite coatings produced by laser cladding[J]. Metals, 9, 583(2019).

[19] Yang J X, Xiao Z Y, Yang F et al. Microstructure and magnetic properties of NiCrMoAl/WC coatings by laser cladding: effect of WC metallurgical behaviors[J]. Surface and Coatings Technology, 350, 110-118(2018).