[1] [1] C. Fournet, B. Pinot, B. Geenen, F. Ollivier, W. Alexandre, H. G. Floch, A. Roussel, C. Cordillot, and D. Billon, “High damage threshold mirrors and polarizers in the ZrO2=SiO2 and HfO2=SiO2 dielectric system,” Proc. SPIE 1624, 282–293 (1992).

[2] [2] C. J. Stolz, M. D. Thomas, and A. J. Griffin, “BDS thin film damage competition,” Proc. SPIE 7132, 71320C (2008).

[3] [3] R. Chow, M. Runkel, and J. R. Taylor, “Laser damage testing of small optics for the National Ignition Facility,” Appl. Opt. 44, 3527–3531 (2005).

[4] [4] F. Y. Génin, and C. J. Stolz, “Morphologies of laser-induced damage in hafnia-silica multilayer mirror and polarizer coatings,” Proc. SPIE 2870, 439–448 (1996).

[5] [5] X. F. Liu, X. Li, D. W. Li, Y. A. Zhao, and J. D. Shao, “1064nm laser conditioning effect of HfO2=SiO2 high reflectors deposited by e-beam,” Chin. J. Laser. 36, 1545–1549 (2009) (in Chinese).

[6] [6] L. Sheehan, M. Kozlowski, and B. Trench, “Full aperture laser conditioning of multilayer mirrors and polarizers,” Proc. SPIE 2633, 457–463 (1995).

[7] [7] F. Y. Génin, C. J. Stolz, and M. R. Kozlowski, “Growth of laser-induced damage during repetitive illumination of HfO2=SiO2 multilayer mirror and polarizer coatings,” Proc. SPIE 2966, 273–282 (1997).

[8] [8] X. F. Liu, X. Li, D. W. Li, Y. A. Zhao, and J. D. Shao, “An automated damage diagnostic system for laser damage threshold tests,” Chin. Opt. Lett. 8, 407–410 (2010).

[9] [9] X. F. Liu, D. W. Li, Y. A. Zhao, X. Li, X. L. Ling, and J. D. Shao, “Damage characteristics of HfO2=SiO2 45° incidence high reflector in 1-on-1 and N-on-1 tests,” Chin. Opt. Lett. 8, 41–44 (2010).

[10] [10] J. Hue, F. Y. Génin, and S. Maricle, “Comparison of the single pulse delaminate damage size for 3 ns and 10 ns pulses,” Lawrence Livermore National Laboratory report (12 June 1996).

[11] [11] X. F. Liu, D.W. Li, Y. A. Zhao, and X. Li, “Further investigation on the damage characteristic of nodular defects,” Appl. Opt. 49, 1774–1779 (2010).

[12] [12] H. Y. Hu, Z. X. Fan, and Y. Liu, “Measuring weak absorptance of thin film coatings by surface thermal lensing technique,” Laser Phys. 10, 633–639 (2000).

[13] [13] A. L. Rigatti and D. J. Smith, “Status of optics on the OMEGA laser after 18 months of operation,” Proc. SPIE 2966, 441–450 (1997).

[14] [14] C. J. Stolz, M. D. Feit, and T. V. Pistor, “Laser intensification by spherical inclusions embedded within multilayer coatings,” Appl. Opt. 45, 1594–1601 (2006).

[15] [15] Y. G. Shan, H. B. He, C. Y. Wei, S. H. Li, M. Zhou, D. W. Li, and Y. A. Zhao, “Geometrical characteristics and damage morphology of nodules grown from artificial seeds in multilayer coating,” Appl. Opt. 49, 4290–4295 (2010).

[16] [16] M. Ushio, K. Komurasaki, K. Kawamura, and Y. Arakawa, “Effect of laser supported detonation wave confinement on termination conditions,” Shock Waves 18, 35–39 (2008).

[17] [17] E. Stormer and M. von Allmen, “Influence of laser-supported detonation waves on metal drilling with pulsed CO2 lasers,” J. Appl. Phys. 49, 5648–5654 (1978).

[18] [18] A. Salleo, T. Sands, and F. Y. Génin, “Machining of transparent materials using an IR and UV nanosecond pulsed laser,” Appl. Phys. A 71, 601–608 (2000).