[1] CAI Xiangzhou, DAI Zhimin, XU Hongjie. Thorium molten salt reactor nuclear energy system[J]. Physics, 45, 578-590(2016).

[2] ZHANG Wenyu. Research and application of printed circuit board heat exchanger[J]. Journal of Shanghai Electric Technology, 12, 64-68(2019).

[3] Yoon S H, No H C, Kang G B. Assessment of straight, zigzag, S-shape, and airfoil PCHEs for intermediate heat exchangers of HTGRs and SFRs[J]. Nuclear Engineering and Design, 270, 334-343(2014).

[4] CHENG Xiang, LIAN Jie, SU Tong et al. Study on thermal-hydraulic performance of printed circuit heat exchanger with non-uniform channels used for steam generator[J]. China Sciencepaper, 15, 432-437(2020).

[5] Figley J, Sun X D, Mylavarapu S K et al. Numerical study on thermal hydraulic performance of a Printed Circuit Heat Exchanger[J]. Progress in Nuclear Energy, 68, 89-96(2013).

[6] LI Lei, YANG Jian, MA Ting et al. Study on the heat transfer and pressure drop of printed circuit heat exchanger[J]. Journal of Engineering Thermophysics, 35, 931-934(2014).

[7] Ma T, Li L, Xu X Y et al. Study on local thermal-hydraulic performance and optimization of zigzag-type printed circuit heat exchanger at high temperature[J]. Energy Conversion and Management, 104, 55-66(2015).

[8] Ngo T L, Kato Y, Nikitin K et al. Heat transfer and pressure drop correlations of microchannel heat exchangers with S-shaped and zigzag fins for carbon dioxide cycles[J]. Experimental Thermal and Fluid Science, 32, 560-570(2007).

[9] Ngo T L, Kato Y, Nikitin K et al. New printed circuit heat exchanger with S-shaped fins for hot water supplier[J]. Experimental Thermal and Fluid Science, 30, 811-819(2006).

[10] Kim D E, Kim M H, Cha J E et al. Numerical investigation on thermal-hydraulic performance of new printed circuit heat exchanger model[J]. Nuclear Engineering and Design, 238, 3269-3276(2008).

[11] Wang W Q, Qiu Y, He Y L et al. Experimental study on the heat transfer performance of a molten-salt printed circuit heat exchanger with airfoil fins for concentrating solar power[J]. International Journal of Heat and Mass Transfer, 135, 837-846(2019).

[12] Shi H Y, Li M J, Wang W Q et al. Heat transfer and friction of molten salt and supercritical CO2 flowing in an airfoil channel of a printed circuit heat exchanger[J]. International Journal of Heat and Mass Transfer, 150, 119006(2020).

[13] CHENG Jindong, WANG Bo, WANG Yaliang et al. Flow and heat transfer characteristics of airfoil printed circuit heat exchanger[J]. Modeling and Simulation, 877-889(2021).

[14] SHI Hongyuan, LIU Hua, XIONG Jianguo et al. Study on flow and heat transfer characteristics of an airfoil printed circuit heat exchanger with dimples[J]. Journal of Engineering Thermophysics, 40, 857-862(2019).

[15] Fu Q M, Ding J, Lao J W et al. Thermal-hydraulic performance of printed circuit heat exchanger with supercritical carbon dioxide airfoil fin passage and molten salt straight passage[J]. Applied Energy, 247, 594-604(2019).

[16] LIU Chen, LI Qiming, ZOU Yang et al. Optimization of structural parameters and thermal-hydraulic numerical simulation of printed circuit heat exchanger with airfoil fins[J]. Nuclear Techniques, 44, 110602(2021).

[17] Rai A K, Trpathy H, Hajra R N et al. Thermophysical properties of Ni based super alloy 617[J]. Journal of Alloys & Compounds, 698, 442-450(2016).

[18] Wang W Q, Qiu Y, He Y L et al. Experimental study on the heat transfer performance of a molten-salt printed circuit heat exchanger with airfoil fins for concentrating solar power[J]. International Journal of Heat and Mass Transfer, 135, 837-846(2019).

[19] Kim I H, No H C, Lee J I et al. Thermal hydraulic performance analysis of the printed circuit heat exchanger using a helium test facility and CFD simulations[J]. Nuclear Engineering & Design, 239, 2399-2408(2012).