[1] Ling Y, Zhao L H, Lin X et al. Discussion of improvement method of electrical contacts on high voltage disconnector[J]. High Voltage Apparatus, 46, 101-105(2010).

[2] Qian B G, Geng H R, Guo Z Q et al. Development and application of electrical contact materials[J]. Materials for Mechanical Engineering, 28, 7-9(2004).

[3] Wang R J, Wang J B, Song Y K et al. Research and development of high-voltage and vacuum copper based contact materials[J]. Electrical Engineering Materials, 15-18(2014).

[4] Du Z M, Wang J B, Fu C et al. The current situation and application of cladding technology in the copper based electrical contact materials[J]. Electrical Engineering Materials, 30-34(2009).

[5] Han Y J, Zhou X P. Study on the microstructure and wear resistance of flame sprayed high entropy alloy reinforced copper-based composite coatings[J]. Materials Protection, 54, 18-23(2021).

[6] Chen S Y, Wang J F, Liu C S et al. Particle reinforced Co-based composite alloy coating produced by laser inducing in situ synthesis on the surface of copper alloy[J]. Acta Materiae Compositae Sinica, 25, 126-130(2008).

[7] Wang H T, Li C J, Yang G J. Influence of hard phase on the properties of cold-sprayed FeAl intel-metallic compound coatings[J]. Materials Protection, 43, 90-94, 117(2010).

[8] Chen B X, Chen W. Microstructure and friction property of cold-sprayed Al-25% Al2O3 coating on the surface of AZ80 magnesium alloy for automobile[J]. Materials Protection, 52, 44-47(2019).

[9] Suo X K, Yin S, Li H et al. Numerical and experimental investigation on bonding behavior of cold sprayed porous WC-17Co particles onto different substrates[J]. Coatings, 8, 367(2018).

[10] Suo X K, Abdoli L, Liu Y et al. Colonization of bacteria on the surfaces of cold-sprayed copper coatings alters their electrochemical behaviors[J]. Journal of Thermal Spray Technology, 26, 687-694(2017).

[11] Yang K, Li W Y. Research on bonding characteristics of particles in cold spraying Cu/Ni/Al composite coating[J]. Welded Pipe and Tube, 41, 15-20(2018).

[12] Ma G L, Kong L Y, Li T F et al. Microstructure of copper particle deposited on aluminum by cold spray[J]. Rare Metal Materials and Engineering, 47, 1166-1173(2018).

[13] Luo X T, Ge Y, Xie Y C et al. Dynamic evolution of oxide scale on the surfaces of feed stock particles from cracking and segmenting to peel-off while cold spraying copper powder having a high oxygen content[J]. Journal of Materials Science & Technology, 67, 105-115(2021).

[14] Yang L J, Li Z X, Huang C L et al. Producing hard material coatings by laser-assisted cold spray: a technological review[J]. Materials Review, 32, 412-417, 426(2018).

[15] Sun J Y, Yan Y L, Li B et al. Comparative study on cavitation-resistance and mechanism of stellite-6 coatings prepared with supersonic laser deposition and laser cladding[J]. Chinese Journal of Lasers, 48, 1002118(2021).

[16] Olakanmi E O, Doyoyo M. Laser-assisted cold-sprayed corrosion- and wear-resistant coatings: a review[J]. Journal of Thermal Spray Technology, 23, 765-785(2014).

[17] Bray M, Cockburn A, O’Neill W. The Laser-assisted cold spray process and deposit characterisation[J]. Surface and Coatings Technology, 203, 2851-2857(2009).

[18] Zhang G, Zhang J, Li B et al. Influence of laser irradiation on compactness and wear resistance of Ti6Al4V coating prepared by supersonic laser deposition[J]. Acta Optica Sinica, 41, 1414002(2021).

[19] Zhang Q L, Wu L J, Zou H S et al. Correlation between microstructural characteristics and cavitation resistance of Stellite-6 coatings on 17-4 PH stainless steel prepared with supersonic laser deposition and laser cladding[J]. Journal of Alloys and Compounds, 860, 158417(2021).

[20] Yang L J, Li Z H, Li B et al. Microstructure and deposition mechanism of Ni60 coatings prepared by supersonic laser deposition[J]. Chinese Journal of Lasers, 42, 0306005(2015).

[21] Jones M, Cockburn A, Lupoi R et al. Solid-state manufacturing of tungsten deposits onto molybdenum substrates with supersonic laser deposition[J]. Materials Letters, 134, 295-297(2014).

[22] Lupoi R, Sparkes M, Cockburn A et al. High speed titanium coatings by supersonic laser deposition[J]. Materials Letters, 65, 3205-3207(2011).

[23] Lupoi R, Cockburn A, Bryan C et al. Hardfacing steel with nanostructured coatings of Stellite-6 by supersonic laser deposition[J]. Light: Science & Applications, 1, e10(2012).

[24] Li B, Jin Y, Yao J H et al. Solid-state fabrication of WCp-reinforced Stellite-6 composite coatings with supersonic laser deposition[J]. Surface and Coatings Technology, 321, 386-396(2017).

[25] Yao J H, Yang L J, Li B et al. Beneficial effects of laser irradiation on the deposition process of diamond/Ni60 composite coating with cold spray[J]. Applied Surface Science, 330, 300-308(2015).

[26] Li S Y, Li A J, Dai D et al. Preparation, properties and application of graphene/Cu composite materials[J]. Journal of Functional Materials, 48, 9043-9051(2017).

[27] Zhang M J, Zhu S W, Yu J F et al. Development of graphite/copper matrix composites[J]. Foundry Technology, 38, 2565-2570, 2578(2017).

[28] Babu R V, Kanagaraj S. Thermal, electrical and mechanical characterization of microwave sintered copper/carbon nanotubes (CNT) composites against sintering duration, CNT diameter and its concentration[J]. Journal of Materials Processing Technology, 258, 296-309(2018).

[29] Wu L J, Wang W L, Li B et al. Influence of diamond particle size and content on the microstructure and properties of diamond/Cu composite coating prepared by supersonic laser deposition[J]. Surface Technology, 48, 40-46(2019).

[30] Wang J, Guo L N, Lin W M et al. The effects of graphene content on the corrosion resistance, and electrical, thermal and mechanical properties of graphene/copper composites[J]. New Carbon Materials, 34, 161-169(2019).

[31] Li B, Yang L J, Li Z H et al. Beneficial effects of synchronous laser irradiation on the characteristics of cold-sprayed copper coatings[J]. Journal of Thermal Spray Technology, 24, 836-847(2015).

[32] Huang X J, Wu L J, Li B et al. Microstructure characterization and tribological properties evaluation on WC/Cu composite coating prepared by supersonic laser deposition[J]. Journal of Mechanical Engineering, 56, 78-85(2020).

[33] Wang J J, Tian K, Chen Z J et al. Microstructure and wear resistance of graphite/Cu composite coating prepared by supersonic laser deposition[J]. Chinese Journal of Lasers, 48, 1802015(2021).

[34] Zhang C F, Qiu F M, Li B et al. Microstructure and thermal conductivity of laser-assisted low-pressure cold sprayed Cu coating[J/OL]. The Chinese Journal of Nonferrous Metals, 1-17. http://kns.cnki.net/kcms/detail/43.1238.TG.20211210.1646.001.html

[35] Guillemet T, Geffroy P M, Heintz J M et al. An innovative process to fabricate copper/diamond composite films for thermal management applications[J]. Composites Part A: Applied Science and Manufacturing, 43, 1746-1753(2012).

[36] Koppad P G, Ram H R A, Ramesh C S et al. On thermal and electrical properties of multiwalled carbon nanotubes/copper matrix nanocomposites[J]. Journal of Alloys and Compounds, 580, 527-532(2013).