Bulletin of the Chinese Ceramic Society, Volume. 44, Issue 3, 1110(2025)

Influence of Pyrolysis Atmosphere on Phase Transformation and Mechanical Properties of Boron Nitride Fibers

QI Xueli1...2, DING Weichen2, CHENG Zhiqiang2 and YAO Jianyao1,* |Show fewer author(s)
Author Affiliations
  • 1College of Aerospace Engineering, Chongqing University, Chongqing 400044, China
  • 2Shandong Industrial Ceramic Research & Design institute Co., Ltd., Zibo 255000, China
  • show less
    References(18)

    [1] [1] TANG Y, WANG J, LI X D, et al. Polymer-derived SiBN fiber for high-temperature structural/functional applications[J]. Chemistry-A European Journal, 2010, 16(22): 6458-6462.

    [4] [4] QI G, ZHANG C, HU H, et al. Three-dimensional silica fiber reinforced silicon nitride-based composites fabricated via different polysilazanes[J]. Advanced Engineering Materials, 2005, 7(11): 1043-1046.

    [7] [7] HU X, SHAO C W, WANG J, et al. Characterization and high-temperature degradation mechanism of continuous silicon nitride fibers[J]. Journal of Materials Science, 2017, 52(12): 1-12.

    [9] [9] TOURY B, MIELE P, CORNU D, et al. Boron nitride fibers prepared from symmetric and asymmetric alkylaminoborazines[J]. Advanced Functional Materials, 2002, 12(3): 228-234.

    [10] [10] YANG X J, LI B, LI D, et al. High-temperature properties and interface evolution of silicon nitride fiber reinforced silica matrix wave-transparent composite materials[J]. Journal of the European Ceramic Society, 2019, 39(2/3): 240-248.

    [11] [11] LI B, LIU K, ZHANG C R, et al. Fabrication and properties of borazine derived boron nitride bonded porous silicon aluminum oxynitride wave-transparent composite[J]. Journal of the European Ceramic Society, 2014, 34(15): 3591-3595.

    [15] [15] SONG M, YAN L W, LI Y F, et al. Thermal insulated C/SiC nanofiber aerogel with high thermal stability and superior electromagnetic wave absorption performance[J]. Ceramics International, 2024, 50(16): 28907-28917.

    [16] [16] WEI C C, ZHANG Z Y, XUE Y L, et al. Toughening and ablation mechanism of Si3N4 short fiber toughened ZrB2-based ceramics[J]. Journal of the European Ceramic Society, 2023, 43(13): 5425-5435. 2023

    [17] [17] BERNARD S, CORNU D, MIELE P, et al. Pyrolysis of poly[2, 4, 6-tri(methylamino)borazine]and its conversion into BN fibers[J]. Journal of Organometallic Chemistry, 2002, 657(1/2): 91-97.

    [19] [19] LIU Y, PAN Y C, YIN D Q, et al. Mechanical properties and thickness-determined fracture mode of hexagonal boron nitride nanosheets under nanoindentation simulations[J]. Computational Materials Science, 2021, 186: 110047.

    [25] [25] SHI Y, YUAN S, TER-OVANESSIAN B, et al. Enhancing the barrier effect of sol-gel derived inorganic coating by doping h-BN nanosheet[J]. Applied Surface Science, 2021, 544: 148849.

    [26] [26] WANG W, DENG P Y, LIU X Q, et al. A CsPbBr3 quantum dots/ultra-thin BN fluorescence sensor for stability and highly sensitive detection of tetracycline[J]. Microchemical Journal, 2020, 162(22): 105876.

    [27] [27] LEI Y, WANG Y D, SONG Y C, et al. Nearly stoichiometric BN fiber with low dielectric constant derived from poly[(alkylamino)borazine][J]. Materials Letters, 2011, 65(2): 157-159.

    [28] [28] DU Z, FENG L, GUO Z, et al. Ultrathin h-BN/Bi2MoO6 heterojunction with synergetic effect for visible-light photocatalytic tetracycline degradation[J]. Journal of Colloid and Interface Science, 2021, 589(1): 545-555.

    [30] [30] LONG X, WU Z Y, SHAO C, et al. High-temperature oxidation behavior of SiBN fibers in air[J]. Journal of Advanced Ceramics, 2021, 10(4): 768-777.

    [32] [32] CORNU D, BERNARD S, DUPERRIER S, et al. Alkylaminoborazine-based precursors for the preparation of boron nitride fibers by the polymer-derived ceramics (PDCs) route[J]. Journal of the European Ceramic Society, 2005, 25(2/3): 111-121.

    [33] [33] AHMAD P, KHANDAKER M U, MUHAMMAD N, et al. Synthesis of multilayered hexagonal boron nitride microcrystals as a potential hydrogen storage element[J]. Ceramics International, 2017, 43(9): 7358-7361.

    [35] [35] BERNARD S, WEINMANN M, GERSTEL P, et al. Boron-modified polysilazane as a novel single-source precursor for SiBCN ceramic fibers: synthesis, melt-spinning, curing and ceramic conversion[J]. Journal of Materials Chemistry, 2005, 15(2): 289-299.

    Tools

    Get Citation

    Copy Citation Text

    QI Xueli, DING Weichen, CHENG Zhiqiang, YAO Jianyao. Influence of Pyrolysis Atmosphere on Phase Transformation and Mechanical Properties of Boron Nitride Fibers[J]. Bulletin of the Chinese Ceramic Society, 2025, 44(3): 1110

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Received: Sep. 29, 2024

    Accepted: Apr. 24, 2025

    Published Online: Apr. 24, 2025

    The Author Email: YAO Jianyao (yaojianyao@cqu.edu.cn)

    DOI:10.16552/j.cnki.issn1001-1625.2024.1156

    Topics