[1] Xu P, Jiang G Y, Hu Y J et al. Influence of keyhole effect on the cross-section geometry of laser cladding layer[J]. Surface Technology, 48, 125-130(2019).

[2] Li P F, Sun W L, Huang Y et al. Research status of multi-track overlapping laser cladding technology[J]. Hot Working Technology, 45, 7-10, 30(2016).

[3] DebRoy T, Wei H L, Zuback J S et al. Additive manufacturing of metallic components —— Process, structure and properties[J]. Progress in Materials Science, 92, 112-224(2018).

[4] Gong C, Wang L F, Zhu G X et al. Numerical simulation of residual stress in 316L stainless steel cladding layer by laser additive manufacturing[J]. Applied Laser, 38, 402-408(2018).

[5] Onwubolu G C, Davim J P, Oliveira C et al. Prediction of clad angle in laser cladding by powder using response surface methodology and scatter search[J]. Optics & Laser Technology, 39, 1130-1134(2007).

[6] Nabhani M, Razavi R S, Barekat M. An empirical-statistical model for laser cladding of Ti-6Al-4V powder on Ti-6Al-4V substrate[J]. Optics & Laser Technology, 100, 265-271(2018).

[7] Li J B, Shang S, Sun Y Z et al. Parameter nondimensionalization in laser direct metal deposition formation of Inconel 625 and its influence on single track geometric morphology[J]. Chinese Journal of Lasers, 44, 0302010(2017).

[8] Zhang Z D, Zeng Q W, Liu L M et al. Forming regularity of aluminum alloy formed by laser induced MIG arc additive manufacturing[J]. Transactions of the China Welding Institution, 40, 7-12, 161(2019).

[9] Farahmand P, Kovacevic R. An experimental-numerical investigation of heat distribution and stress field in single- and multi-track laser cladding by a high-power direct diode laser[J]. Optics & Laser Technology, 63, 154-168(2014).

[10] Nazemi N, Urbanic R J. A numerical investigation for alternative toolpath deposition solutions for surface cladding of stainless steel P420 powder on AISI 1018 steel substrate[J]. The International Journal of Advanced Manufacturing Technology, 96, 4123-4143(2018).

[11] Ren Z H, Wu M P, Tang Y H et al. Numerical simulation and experimental research of laser cladding based on thermo-mechanical coupling[J]. Laser & Optoelectronics Progress, 56, 051404(2019).

[12] Ge J B, Zhang A F, Li D C et al. Process research on DZ125L superalloy parts by laser metal direct forming[J]. Chinese Journal of Lasers, 38, 0703004(2011).

[13] Li B C, Zhao Y, Yu T B et al. Experimental study of single pass cladding layers for process parameter selection of laser cladding Ni204 alloy[J]. Applied Laser, 38, 713-719(2018).

[14] Xie H M. Process study and profile prediction on laser cladding of titanium alloys[D]. Dalian: Dalian University of Technology, 18-20(2014).

[15] Wu Z Z. Research on electron beam welding-brazing of WC-Co cemented carbide and steel[D]. Harbin: Harbin Institute of Technology, 17-18(2013).

[16] Chen L, Tao R, Lou D Y et al. Analysis of the mechanism cracking during the multipass laps cladding experiment[J]. Laser & Optoelectronics Progress, 51, 101401(2014).

[17] Zheng L J, Li Y, He D C et al. Analysis on temperature field of multi-path laser claded and microstructure of coatings layer[J]. Infrared and Laser Engineering, 42, 52-57(2013).

[18] Zhu Z M, Fu P P, Yang Z Y et al. Research and development of a heat-source model in numerical simulations for the arc welding process[J]. Chinese Journal of Engineering, 40, 389-396(2018).

[19] Gu J Q, Luo F, Yao J H. Numerical simulation of residual stress during laser cladding[J]. Laser & Optoelectronics Progress, 47, 101401(2010).

[20] Zhang S Y, Lin X, Chen J et al. Influence of heat treatment on residual stress of Ti-6Al-4V alloy by laser solid forming[J]. Rare Metal Materials and Engineering, 38, 774-778(2009).