[1] [1] ZHANG Z Y, WANG B. Research on the life-cycle CO2 emission of China’s construction sector[J]. Energy Build, 2016, 112: 244-255.

[4] [4] LIU Y L, LI C F, ZHAI H X, et al. Production and performance of CO2 modified foam concrete[J]. Constr Build Mater, 2023, 389: 131671.

[5] [5] ZHANG Z H, PROVIS J L, REID A, et al. Geopolymer foam concrete: An emerging material for sustainable construction[J]. Constr Build Mater, 2014, 56: 113-127.

[7] [7] ZHANG X, LIU S Y, WU K, et al. Experimental investigation into the self-carbonation mechanism of magnesium oxide carbon sequestration foamed concrete[J]. Cem Concr Compos, 2024, 148: 105486.

[8] [8] JIANG L B, WANG Z, WANG Y, et al. Preparation and properties of carbon dioxide foamed concrete using nanoparticles as foam stabilizer and pre-carbonated cement slurry[J]. Cem Concr Compos, 2024, 151: 105585.

[9] [9] TA X P, ZHANG Y, WAN Z J, et al. Study on preparation and performance of CO2 foamed concrete for heat insulation and carbon storage[J]. Materials, 2023, 16(7): 2725.

[11] [11] TA X P, WAN Z J, ZHANG Y, et al. Effect of carbonation and foam content on CO2 foamed concrete behavior[J]. J Mater Res Technol, 2023, 23: 6014-6022.

[12] [12] ZHANG C P, FAN D Q, LU J X, et al. Ultra-stable foam enabled by nano silica engineering for foam concrete improvement[J]. Cem Concr Compos, 2024, 150: 105575.

[13] [13] SHEN P L, LU J X, ZHANG Y Y, et al. Preparation aragonite whisker-rich materials by wet carbonation of cement: Towards yielding micro-fiber reinforced cement and sequestrating CO2[J]. Cem Concr Res, 2022, 159: 106891.

[14] [14] STEVENSON P. Foam engineering: fundamentals and applications[M]. John Wiley & Sons, 2012.

[19] [19] TRAN N P, NGUYEN T N, NGO T D, et al. Strategic progress in foam stabilisation towards high-performance foam concrete for building sustainability: A state-of-the-art review[J]. J Clean Prod, 2022, 375: 133939.

[20] [20] ZHANG J, YANG H, ZHANG S W, et al. Potential utilization of CO2 foams in developing lightweight building materials[J]. J Build Eng, 2023, 76: 107342.

[21] [21] HOU L, LI J, LU Z Y, et al. Influence of foaming agent on cement and foam concrete[J]. Constr Build Mater, 2021, 280: 122399.

[22] [22] EXEROWA D, CHURAEV N V, KOLAROV T, et al. Foam and wetting films: Electrostatic and steric stabilization[J]. Adv Colloid Interface Sci, 2003, 104: 1-24.

[23] [23] CAO M L, XU L, ZHANG C. Rheology, fiber distribution and mechanical properties of calcium carbonate (CaCO3) whisker reinforced cement mortar[J]. Compos Part A Appl Sci Manuf, 2016, 90: 662-669.

[24] [24] CHEN Y. Experimental study on application performance of foamed concrete prepared based on a colloidal Nano SiO2-stabilized foam[J]. Constr Build Mater, 2023, 409: 134012.

[25] [25] KUNHANANDAN NAMBIAR E K, RAMAMURTHY K. Air-void characterisation of foam concrete[J]. Cem Concr Res, 2007, 37(2): 221-230.

[26] [26] ZHANG S L, QI X Q, GUO S Y, et al. A systematic research on foamed concrete: The effects of foam content, fly ash, slag, silica fume and water-to-binder ratio[J]. Constr Build Mater, 2022, 339: 127683.

[27] [27] FAN D Q, LU J X, LIU K N, et al. Multi-scale design of ultra-high performance concrete (UHPC) composites with centroplasm theory[J]. Compos Part B Eng, 2024, 281: 111562.

[28] [28] LI L, XUAN D X, CHU S H, et al. Efficiency and mechanism of nano-silica pre-spraying treatment in performance enhancement of recycled aggregate concrete[J]. Constr Build Mater, 2021, 301: 124093.

[29] [29] LU J X, SHEN P L, SUN Y J, et al. Strategy for preventing explosive spalling and enhancing material efficiency of lightweight ultra high-performance concrete[J]. Cem Concr Res, 2022, 158: 106842.

[30] [30] ASADZADEH S, KHOSHBAYAN S. Multi-objective optimization of influential factors on production process of foamed concrete using Box-Behnken approach[J]. Constr Build Mater, 2018, 170: 101-110.

[31] [31] KIANI B, GANDOMI A H, SAJEDI S, et al. New formulation of compressive strength of preformed-foam cellular concrete: An evolutionary approach[J]. J Mater Civ Eng, 2016, 28(10): 4016092.

[32] [32] NAMSONE E, AHMENKO G, KORJAKINS A. Durability properties of high performance foamed concrete[J]. Procedia Eng, 2017, 172: 760-767.

[33] [33] SALAMI B A, IQBAL M, ABDULRAHEEM A, et al. Estimating compressive strength of lightweight foamed concrete using neural, genetic and ensemble machine learning approaches[J]. Cem Concr Compos, 2022, 133: 104721.

[35] [35] LAN X L, ZENG X H, ZHU H S, et al. Experimental investigation on fractal characteristics of pores in air-entrained concrete at low atmospheric pressure[J]. Cem Concr Compos, 2022, 130: 104509.

[36] [36] CHEN Y N, ZHANG Y M, XIE Y D, et al. Unraveling pore structure alternations in 3D-printed geopolymer concrete and corresponding impacts on macro-properties[J]. Addit Manuf, 2022, 59: 103137.

[37] [37] SCRIVENER K, SNELLINGS R, LOTHENBACH B, et al. A practical guide to microstructural analysis of cementitious materials[M]. Crc Press Boca Raton, FL, USA, 2016.

[39] [39] LU B, DRISSI S, LIU J H, et al. Effect of temperature on CO2 curing, compressive strength and microstructure of cement paste[J]. Cem Concr Res, 2022, 157: 106827.