[1] [1] S. Choopun. D. Visputer, W. Noch et al.. Oxygen pressuretuned epitaxy and optoelectronic properties of laser-deposited ZnO films on sapphire［J］. Appl. Phys. Lett., 1999, 75(25): 3947～3949

[2] [2] I. Siener, N. Wander, I. Urban et al.. Electron microscopic characterization of reactively sputtered ZnO films with different Al-doping levels［J］. Thin Solid Films, 1998, 330(2): 108～113

[3] [3] J. H. Lee, B. O. Park. Transparent conducting ZnOAl, In and Sn thin films deposited by the sol-gel method［J］. Thin Solid Films, 2003, 426(1-2): 94～99

[4] [4] J. Wienke, A. S. Booij. ZnOIn deposition by spray pyrolysis-Influence of the growth conditions on the electrical and optical properties［J］. Thin Solid Films, 2008, 516(14): 4508～4512

[5] [5] K. Ogata, K. Koike, T. Tanite et al.. ZnO and ZnMgO growth on a-plane sapphire by molecular beam epitaxy［J］. J. Cryst. Growth, 2003, 251(1-4): 623～627

[6] [6] Liu Yaodong, Lian Jianshe. Optical and electrical properties of aluminum-doped ZnO thin films grown by pulsed laser deposition［J］. Appl. Surf. Sci., 2007, 253(7): 3727～3730

[7] [7] O. Pagni, N. Somhlahlo, C. Weichsel et al.. Electrical properties of ZnO thin films grown by MOCVD［J］. Physica B:Condensed Matter, 2006, 376-377(1): 749～751

[8] [8] H. Czternastek. Effect of deposition geometry on structural, electrical and optical properties of ZnOAl films by magnetron sputtering［J］. Vacuum, 2008, 82(10): 994～997

[9] [9] Wang Lihui, Gan Guoyou, Sun Jialin et al.. Research on the influencing mechanism of Fe on the electrical characteristics of ZnO grain boundary［J］. Materials Review, 2009, 23(4): 28～30

[10] [10] W. T. Lim, C. H. Lee. Highly oriented ZnO thin films deposited on Ru/Si substrates［J］. Thin Solid Films, 1999, 353(1-2): 12

[11] [11] H. Lengfeller, G. Kremb, A. Schnellbogl et al.. Giant voltages upon surface heating in normal YBa2Cu3O7-δ films suggesting an atomic layer thermopile［J］. Appl. Phys. Lett., 1994, 64(4): 501～504

[12] [12] H. U. Habermeier, X. H. Li, P. X. Zhang et al.. Anisotropy of thermoelectric properties in La1-xCaxMnO3 thin films studied by laser-induced transient voltages［J］. Solid State Commun., 1999, 110(9): 473～478

[13] [13] Yang Youli. Study on Preparation Technology and Properties of La0.7(Ca0.53Sr0.47)0.3MnO3 Prepared by Chemical Coprecipitation Method［D］. Kunming:Kunming University of Science and Technology, 2005. 51

[14] [14] P. X. Zhang, G. Y. Zhang, H. J. Wu et al.. Time constant of laser-induced thermoelectric voltage device made by LaCaMnO3, YBa2Cu3O7, SIGMA and LaSrCoO3 thin films［J］. Trans. Mater. Res. Soc. Jpn., 2004, 29(4): 1423～1426

[15] [15] L. R. Testardi. Anomalous, laser-induced voltages in YBa2Cu3Ox and "off-diagonal" thermoelectricity［J］. Appl. Phys. Lett., 1994, 64(18): 2347～2349

[16] [16] Wang Chong, Zhang Pengxiang, Zhang Guoyong. Optimum thickness for laser induced thermoelectric voltage effect in high Tc superconductor and CMR thin film［J］. Acta Physica Sinica, 2002, 53(6): 1727～1730

[17] [17] P. X. Zhang, G. Y. Zhang, H. J. Wu et al.. Time constant of laser-induced thermoelectric voltage device made by LaCaMnO3, YBa2Cu3O7-δ SIGMA and LaSrCoO3 thin films［J］. Trans. Mater. Res. Soc., 2004, 29(4): 1423～1246

[18] [18] Zou Ping, Li Zhidong, Zhang Hui et al.. Bi2Sr2Co2Oδ thermoelectric thin films prepared by pulsed laser deposition and study on laser induced thermoelectric voltage effect［J］. Chinese J. Lasers, 2009, 36(8): 2154～2157

[19] [19] Xiong Fei, Zhang Hui, Zhang Pengxiang et al.. Preparation of single-phase Nd1.85Ce0.15CuO4 thin films by pulse laser deposition and the laser-induced thermoelectric voltage effect［J］. J. Functional Materials and Devices, 2009, 15(2): 113～119

[20] [20] Hu Juntao, Li Hongshan, Zhu Jie et al.. Method of measuring anisotropy Seebeck coefficient of thin film based on laser induced thermoelectric voltage effect［J］. Chinese J. Lasers, 2009, 36(5): 1214～1217

[21] [21] Shang Jie, Zhang Hui, Cao Minggang et al.. Preparation of PZT thin films and research of laser-induced thermoelectric voltage［J］. Chinese J. Lasers, 2010, 37(12): 3127～3132