[1] H. Ogihara, C. A. Randall, S. Trolier-McKinstry. High-energy density capacitors utilizing 0.7 BaTiO3–0.3 BiScO3 ceramics. J. Am. Ceram. Soc., 92, 1719(2009).

[2] N. H. Fletcher, A. D. Hilton, B. W. Rivketts. Optimization of energy storage density in ceramic capacitors. J. Phys. D: Appl. Phys., 29, 253(1996).

[3] J. Li et al. Grain-orientation-engineered multilayer ceramic capacitors for energy storage applications. Nat. Mater., 19, 999(2020).

[4] Z. Yao et al. Homogeneous/inhomogeneous-structured dielectrics and their energy-storage performances. Adv. Mater., 29, 1601727(2017).

[5] Z. Dai et al. Enhanced energy storage properties and stability of Sr(Sc0.5Nb0.5)O3 modified 0.65BaTiO3–0.35Bi0.5Na0.5TiO3 ceramics. Chem. Eng. J., 397, 125520(2020).

[6] Y. Zhao, X. Hao, Q. Zhang. Energy-storage properties and electrocaloric effect of Pb(1−3x∕2)LaxZr0.85Ti0.15O3 antiferroelectric thick films. ACS Appl. Mater. Interfaces, 6, 11633(2014).

[7] X. Hao. A review on the dielectric materials for high energy-storage application. J. Adv. Dielectr., 03, 1330001(2013).

[8] W. J. S. Javaid, R. Laghari. Energy-storage pulsed-power capacitor technology. IEEE Trans. Power Electron., 7, 251(1992).

[9] Y. Ding et al. Realizing high-performance capacitive energy storage in lead-free relaxor ferroelectrics via synergistic effect design. J. Eur. Ceram. Soc., 42, 129(2022).

[10] C. Wang et al. Ultrahigh energy storage density in Ba0.85 Ca0.15Zr0.1Ti0.9O3-based lead-free ceramics by introducing a relaxor end-member. J. Eur. Ceram. Soc., 43, 6844(2023).

[11] F. Si, B. Tang, Z. Fang, H. Li, S. Zhang. A new type of BaTiO3-based ceramics with Bi(Mg1∕2Sn1∕2)O3 modification showing improved energy storage properties and pulsed discharging performances. J. Alloys Compd., 819, 153004(2020).

[12] H. Xie et al. Enhanced energy storage properties under low electric fields in (Bi0.5Na0.5)TiO3-based relaxor ferroelectrics via a synergistic optimization strategy. Chem. Eng. J., 450, 138432(2022).

[13] A. Young, G. Hilmas, S. C. Zhang, R. W. Schwartz. Effect of liquid-phase sintering on the breakdown strength of barium titanate. J. Am. Ceram. Soc., 90, 1504(2007).

[14] Y. H. Huang, Y. J. Wu, W. J. Qiu, J. Li, X. M. Chen. Enhanced energy storage density of Ba0.4Sr0.6TiO3–MgO composite prepared by spark plasma sintering. J. Eur. Ceram. Soc., 35, 1469(2015).

[15] D. Han et al. Superior energy storage properties of (1−x)Ba0.85Ca0.15Zr0.1Ti0.9O3–xBi(Mg2∕3Ta1∕3)O3 lead-free ceramics. J. Alloys Compd., 946, 169300(2023).

[16] Z. Dai et al. Improved energy storage density and efficiency of (1−x)Ba0.85Ca0.15Zr0.1Ti0.9O3–xBiMg2∕3Nb1∕3O3 lead-free ceramics. Chem. Eng. J., 410, 128341(2021).

[17] P. Yang, L. Li, S. Yu, W. Peng, K. Xu. Ultrahigh and field-independent energy storage efficiency of (1−x)(Ba0.85Ca0.15)(Zr0.1Ti0.9)O3–xBi(Mg0.5Ti0.5)O3 ceramics. Ceram. Int., 47, 3580(2021).

[18] Y. Zhao et al. High energy storage property and breakdown strength of Bi0.5(Na0.82K0.18)0.5TiO3 ceramics modified by (Al0.5 Nb0.5)4+ complex-ion. J. Alloys Compd., 666, 209(2016).

[19] Y. Zhao et al. High energy storage properties and dielectric behavior of (Bi0.5Na0.5)0.94Ba0.06Ti1−x(Al0.5Nb0.5)xO3 lead-free ferroelectric ceramics. Ceram. Int., 42, 2221(2016).

[20] M. Zhou et al. High energy storage properties of (Ni1∕3Nb2∕3)4+ complex-ion modified (Ba0.85Ca0.15)(Zr0.10Ti0.90)O3 ceramics. Mater. Res. Bull., 98, 166(2018).

[21] S.-Y. Chu, T.-Y. Chen, I. T. Tsai, W. Water. Doping effects of Nb additives on the piezoelectric and dielectric properties of PZT ceramics and its application on SAW device. Sens. Actuators A Phys., 113, 198(2004).

[22] K. Kumar, B. Kumar. Effect of Nb-doping on dielectric, ferroelectric and conduction behaviour of lead free Bi0.5(Na0.5K0.5)0.5TiO3 ceramic. Ceram. Int., 38, 1157(2012).

[23] P. Parjansri, U. Intatha, S. Eitssayeam. Dielectric, ferroelectric and piezoelectric properties of Nb5+ doped BCZT ceramics. Mater. Res. Bull., 65, 61(2015).

[24] T. Shao et al. Potassium-sodium niobate based lead-free ceramics: Novel electrical energy storage materials. J. Mater. Chem. A, 5, 554(2017).

[25] H. Abdmouleh, I. Kriaa, N. Abdelmoula, Z. Sassi, H. Khemakhem. The effect of Zn2+ and Nb5+ substitution on structural, dielectric, electrocaloric properties, and energy storage density of Ba0.95Ca0.05Ti0.95Zr0.05O3 ceramics. J. Alloys Compd., 878, 160355(2021).

[26] R. D. Shannon. Revised effective ionic radii and systematic studies of interatomic distances in halides and chaleogenides. Acta Cryst., 32, 751(1976).

[27] W. Liu, X. Ren. Large piezoelectric effect in Pb-free ceramics. Phys. Rev. Lett., 103, 257602(2009).

[28] F. Yan et al. Superior energy storage properties and excellent stability achieved in environment-friendly ferroelectrics via composition design strategy. Nano Energy, 75, 105012(2020).

[29] Y. Chen et al. La2O3-modified BiYbO3–Pb(Zr,Ti)O3 ternary piezoelectric ceramics with enhanced electrical properties and thermal depolarization temperature. J. Adv. Ceram., 12, 1593(2023).

[30] Y. Chen, H. Zhou, Q. Wang, J. Zhu. Doping level effects in Gd/Cr co-doped Bi3TiNbO9 Aurivillius-type ceramics with improved electrical properties. J. Materiomics, 8, 906(2022).

[31] Q. Zhang, Y. Zhang, X. Wang, T. Ma, Z. Yuan. Influence of sintering temperature on energy storage properties of BaTiO3–(Sr1−1.5xBi)TiO3 ceramics. Ceram. Int., 38, 4765(2012).

[32] T. Wang et al. Relaxor ferroelectric BaTiO3–Bi(Mg2∕3Nb1∕3)O3 ceramics for energy storage application. J. Am. Ceram. Soc., 98, 559(2015).

[33] S. Xiu et al. Effect of rare-earth additions on the structure and dielectric energy storage properties of BaxSr1−xTiO3-based barium boronaluminosilicate glass-ceramics. J. Alloys Compd., 670, 217(2016).

[34] G. R. T. Tunkasiri. Dielectric strength of fine grained barium titanate ceramics. J. Mater. Sci. Lett., 15, 1767(1996).

[35] F. Li, L. Jin, R. Guo. High electrostrictive coefficient Q33 in lead-free Ba(Zr0.2Ti0.8)O3–x(Ba0.7Ca0.3)TiO3 piezoelectric ceramics. Appl. Phys. Lett., 105, 232903(2014).

[36] A. A. Bokov, Z. G. Ye. Recent progress in relaxor ferroelectrics with perovskite structure. J. Mater. Sci., 41, 31(2006).

[37] A. R. Jayakrishnan, P. V. Karthik Yadav, J. P. B. Silva, K. C. Sekhar. Microstructure tailoring for enhancing the energy storage performance of 0.98[0.6Ba(Zr0.2Ti0.8)O3–0.4(Ba0.7Ca0.3)TiO3]–0.02BiZn1∕2Ti1∕2O3 ceramic capacitors. J. Sci.-Adv. Mater. Dev., 5, 119(2020).

[38] D.-Y. Lu, Y. Liang. Valence states and dielectric properties of fine-grained BaTiO3 ceramics co-doped with double valence-variable europium and chromium. Ceram. Int., 44, 14717(2018).

[39] D. Hu et al. Optimization the energy density and efficiency of BaTiO3-based ceramics for capacitor applications. Chem. Eng. J., 409, 127375(2021).

[40] L. Wen, J. Chen, J. Liang, F. Li, H.-M. Cheng. Polymer nanocomposite dielectrics for electrical energy storage. Natl. Sci. Rev., 4, 20(2017).

[41] G. R. Love. Energy storage in ceramic dielectrics. J. Am. Ceram. Soc., 73, 323(1990).

[42] B. Chu et al. A dielectric polymer with high electric energy density and fast discharge speed. Science, 313, 334(2006).

[43] S. Chen, X. Wang, T. Yang, J. Wang. Composition-dependent dielectric properties and energy storage performance of (Pb,La)(Zr,Sn,Ti)O3 antiferroelectric ceramics. J. Electroceramics, 32, 307(2014).

[44] X. Qiao et al. Superior comprehensive energy storage properties in Bi0.5Na0.5TiO3-based relaxor ferroelectric ceramics. Chem. Eng. J., 388, 124158(2020).

[45] L. Yang et al. Perovskite lead-free dielectrics for energy storage applications. Prog. Mater. Sci., 102, 72(2019).

[46] X. Chou, J. Zhai, X. Yao. Relaxor behavior and dielectric properties of La2O3-doped barium zirconium titanate ceramics for tunable device applications. Mater. Chem. Phys., 109, 125(2008).

[47] X. G. Tang, K. H. Chew, H. L. W. Chan. Diffuse phase transition and dielectric tunability of Ba(ZryTi1−y)O3 relaxor ferroelectric ceramics. Acta Mater., 52, 5177(2004).

[48] D. Meng et al. Realising high comprehensive energy storage performance of BaTiO3-based perovskite ceramics via La(Zn1∕2Hf1∕2)O3 modification. Ceram. Int., 48, 16173(2022).

[49] G. Yan et al. Achieving high pulse charge–discharge energy storage properties and temperature stability of (Ba0.98−xLi0.02Lax)(Mg0.04Ti0.96)O3 lead-free ceramics via bandgap and defect engineering. Chem. Eng. J., 450, 137814(2022).

[50] B. Bi, C. H. Yang, Q. Yao, J. H. Song, X. S. Sun. Microstructure, leakage current and dielectric tunability properties of W6+:Na0.5Bi0.5TiO3/Fe3+:Na0.5Bi0.5TiO3 bilayered thin film. Mater Technol., 31, 860(2016).

[51] Y. Sudo, M. Hagiwara, S. Fujihara. Grain size effect on electrical properties of Mn-modified 0.67BiFeO3–0.33BaTiO3 lead-free piezoelectric ceramics. Ceram. Int., 42, 8206(2016).

[52] C. Sun et al. Simultaneously with large energy density and high efficiency achieved in NaNbO3-based relaxor ferroelectric ceramics. J. Eur. Ceram. Soc., 41, 1891(2021).

[53] J. Jiang, T. J. Zhang, B. S. Zhang, H. Mao. Complex impedance analysis of Ba0.65Sr0.35TiO3 ceramics. J. Electroceramics, 21, 258(2007).

[54] I. Ahmad, M. J. Akhtar, M. M. Hasan. Impedance spectroscopic investigation of electro active regions, conduction mechanism and origin of colossal dielectric constant in Nd1−xSrx FeO3 (0.1≤x≤0.5). Mater. Res. Bull., 60, 474(2014).

[55] Z. Wang et al. Low temperature sintering and dielectric properties of (Ba0.85Ca0.15)(Ti0.9Zr0.1)O3–xCu2+ ceramics obtained by the sol–gel technique. Ceram. Int., 42, 18037(2016).

[56] H. Gong, X. Wang, S. Zhang, H. Wen, L. Li. Grain size effect on electrical and reliability characteristics of modified fine-grained BaTiO3 ceramics for MLCCs. J. Eur. Ceram. Soc., 34, 1733(2014).

[57] X. Guo, J. Fleig, J. Maier. Separation of electronic and ionic contributions to the grain boundary conductivity in acceptor-doped SrTiO3. J. Electrochem. Soc., 148, 50(2001).

[58] J. Jamnik, J. Maier. Treatment of the impedance of mixed conductors equivalent circuit model and explicit approximate solutions. J. Electrochem. Soc., 146, 4183(1999).

[59] M. A. Rafiq, M. N. Rafiq, K. Venkata Saravanan. Dielectric and impedance spectroscopic studies of lead-free barium–calcium–zirconium–titanium oxide ceramics. Ceram. Int., 41, 11436(2015).

[60] Y. Chen et al. Diffused phase transition, ionic conduction mechanisms and electric-field dependent ferroelectricity of Nb/Ce co-doped Pb(Zr0.52Ti0.48)O3 ceramics. J. Alloys Compd., 854, 155500(2021).

[61] Y. Chen et al. Dielectric abnormality and ferroelectric asymmetry in W/Cr co-doped Bi4Ti3O12 ceramics based on the effect of defect dipoles. J. Alloys Compd., 696, 746(2017).

[62] F. Li, M. Zhou, J. Zhai, B. Shen, H. Zeng. Novel barium titanate based ferroelectric relaxor ceramics with superior charge–discharge performance. J. Eur. Ceram. Soc., 38, 4646(2018).

[63] Q. Yuan, F. Yao, Y. Wang, R. Ma, H. Wang. Relaxor ferroelectric 0.9BaTiO3–0.1Bi(Zn0.5Zr0.5)O3ceramic capacitors with high energy density and temperature stable energy storage properties. J. Mater. Chem. C, 5, 9552(2017).

[64] Q. Hu et al. Symmetry changes during relaxation process and pulse discharge performance of the BaTiO3–Bi(Mg1∕2Ti1∕2)O3 ceramic. J. Appl. Phys., 124, 054101(2018).

[65] D. Wang et al. Bismuth ferrite-based lead-free ceramics and multilayers with high recoverable energy density. J. Mater. Chem. A, 6, 4133(2018).

[66] M. Zhou, R. Liang, Z. Zhou, X. Dong. Novel BaTiO3-based lead-free ceramic capacitors featuring high energy storage density, high power density, and excellent stability. J. Mater. Chem. C, 6, 8528(2018).

[67] N. Sun, Y. Li, Q. Zhang, X. Hao. Giant energy-storage density and high efficiency achieved in (Bi0.5Na0.5)TiO3–Bi(Ni0.5Zr0.5)O3 thick films with polar nanoregions. J. Mater. Chem. C, 6, 10693(2018).