[1] [1] LOW D K Y, LI L, CORFE A G. Characteristics of spatter formation under the effects of different laser parameters during laser drilling［J］. Journal of Materials Processing Technology, 2001, 118(1-3): 179-186.

[2] [2] LEE C Y, MOON W C, JUNG S B. Surface finishes of rolled copper foil for flexible printed circuit board［J］. Materials Science and Engineering: A, 2008, 483-484: 723-726.

[3] [3] PARK J, LEE J, PARK S, et al. Development of hybrid process for double-side flexible printed circuit boards using roll-to-roll gravure printing, via-hole printing, and electroless plating［J］. The International Journal of Advanced Manufacturing Technology, 2016, 82(9/10/11/12): 1921-1931.

[4] [4] BHANDARI B, HONG Y S, YOON H S, et al. Development of a micro-drilling burr-control chart for PCB drilling［J］. Precision Engineering, 2014, 38(1): 221-229.

[5] [5] HUANG L X. Investigation of chip formation and burr control in PCB fixture hole［J］. Circuit World, 2015, 41(2): 61-69.

[6] [6] ZHENG L J, WANG C Y, ZHANG X, et al. The entry drilling process of flexible printed circuit board and its influence on hole quality［J］. Circuit World, 2015, 41(4): 147-153.

[7] [7] SAHOO S, THAKUR A, GANGOPADHYAY S. Application of analytical simulation on various characteristics of hole quality during micro-drilling of printed circuit board［J］. Materials and Manufacturing Processes, 2016, 31(14): 1927-1934.

[8] [8] YILBAS B S, SAMI M. Study into the effect of beam waist position on hole formation in the laser drilling process［J］. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 1996, 210(3): 271-277.

[9] [9] OLSON R W, SWOPE W C. Laser drilling with focused Gaussian beams［J］. Journal of Applied Physics, 1992, 72(8): 3686-3696.

[11] [11] LI Z Y, ZHENG L J, WANG C Y, et al. Investigation of burr formation and its influence in micro-drilling hole of flexible printed circuit board［J］. Circuit World, 2020, 46(4): 221-228.

[12] [12] ZHANG F, DUAN J, ZENG X Y, et al. Study of blind holes drilling on flexible circuit board using 355 nm UV laser［J］. Chinese Journal of Lasers, 2009, 36(12): 3143-3148.

[13] [13] HAKOLA A, BUCHTER S C, KAJAVA T, et al. Bessel-Gauss output beam from a diode-pumped Nd: YAG laser［J］. Optics Communications, 2004, 238(4/5/6): 335-340.

[14] [14] LIU Y, FENG A X, JIA T D, et al. Experimental study on 515 nm picosecond LaserRing cutting of microholes［J］. Applied Laser, 2019, 39(2): 285-290.

[15] [15] YUAN H W, YANG T. Experimental study on laser fine machining of different metals［J］. Applied Laser, 2020, 40(6): 1086-1091.

[16] [16] JOHNSON J,PFLEDERRER M.D.Deep hole drilling with lasers［J］.Modern Machine Shop,1989,62:53-63.

[17] [17] STEGMAN R L, SCHRIEMPF J T, HETTCHE L R. Experimental studies of laser-supported absorption waves with 5-ms pulses of 10.6-μ radiation［J］. Journal of Applied Physics, 1973, 44(8): 3675-3681.

[18] [18] IWAMORI S, MIYASHITA T, FUKUDA S, et al. Changes in the peeled surfaces of copper thin films deposited on polyimide substrates after heat treatment［J］. The Journal of Adhesion, 1997, 63(4): 309-321.

[19] [19] ZHOU Y, CHEN K Y, WEN S F, et al. Process and properties of pure copper fabricated by selective laser melting［J］. Applied Laser, 2019, 39(3): 387-393.

[20] [20] CHEN Z,LI F M,YANG Y L.Emission spectra and morphology of polymer thin films etched by pulsed ultraviolet laser［J］.Chinese Journal of Luminescence,1993,14(2):179-184.