[1] OUYANG Kun, XU Wei, LIU Xiaojing et al. Effect of corrosion on boiling heat transfer characteristics of metal specimens with micro-structure surface[J]. Nuclear Techniques, 46, 060606(2023).

[2] YANG Xuan, LI Quan, LI Chenxi et al. Coupled irradiation-thermal-mechanical analysis of fuel in solid core of heat pipe cooled reactor[J]. Nuclear Techniques, 47, 070601(2024).

[3] Varghese P, Vetrivendan E, Vaishnavi Krupa B R et al. Molten sodium corrosion of laser surface remelted yttria-stabilized zirconia thermal barrier coatings[J]. Corrosion Science, 191, 109740(2021).

[4] CHEN Zhenlan, ZOU Dunxu. Rapid life test analysis of high temperature sodium heat pipe[J]. Journal of Iron and Steel Research Institute, 79-84(1986).

[5] Courouau J L, Balbaud-Célérier F, Lorentz V et al. Corrosion by liquid sodium of materials for sodium fast reactors: the CORRONa testing device[C], 11152(2011).

[6] Shin S H, Kim J H, Kim J H. Corrosion behavior and microstructural evolution of ASTM A182 Grade 92 steel in liquid sodium at 650 ℃[J]. Corrosion Science, 97, 172-182(2015).

[7] QIN Jingxiang, WANG Kuiying, LI Zhongping et al. High temperature sodium corrosion circuit[J]. Atomic Energy Science and Technology, 96-100(1986).

[8] Zhang J S. Liquid metal corrosion-general theory[M]. Liquid Metal Corrosion, 39-51(2023).

[9] Fazio C, Balbaud F. Corrosion phenomena induced by liquid metals in Generation IV reactors[M]. Structural Materials for Generation IV Nuclear Reactors, 23-74(2017).

[10] Ukai S, Yoshida E, Enokido Y et al. Quantitative characterization on dissolution and deposition behavior of sus 316 stainless steel cladding constituents under flowing sodium in fast reactors[M]. Materials for Nuclear Reactor Core Applications, 1-341(1987).

[11] Zhang J S. Transport in nonisothermal liquid metal loop[M]. Liquid Metal Corrosion, 79-105(2023).

[12] Zhang J. Appendices[M]. Liquid Metal Corrosion, 249-255(2023).

[13] Pillai S R, Khatak H S, Khatak H S, Raj B. Corrosion of austenitic stainless steel in liquid sodium[M]. Corrosion of Austenitic Stainless Steels, 241-264(2002).

[14] DAI Yaonan, ZHENG Xiaotao. Analysis of sodium corrosion effect and creep fatigue stress interaction of nuclear grade 316 stainless steel[C], 8(2021).

[15] ZHANG Hanzi, ZHANG Baoliang, SHEN Chuankai et al. Current progress of molecular dynamics simulation study on the corrosion of reactor alloy materials[J]. Nuclear Techniques, 47, 110001(2024).

[16] Rivollier M, Courouau J L, Tabarant M et al. Oxidation of 316L(N) stainless steel in liquid sodium at 650 ℃[J]. Journal of Nuclear Materials, 500, 337-348(2018).

[17] SivaiBharasi N, Krishna N G, Shankar A R et al. Influence of long term Sodium exposure on the corrosion and tensile properties of AISI type 316LN stainless steel and modified 9Cr-1Mo steel[J]. Journal of Nuclear Materials, 567, 153830(2022).

[18] Hosaka T, Kondo M, Sato S et al. Chemical compatibility of F82H and 316L in liquid metal heat transfer mediums Li, Na and NaK[J]. Journal of Nuclear Materials, 561, 153546(2022).

[19] Furukawa T, Kato S, Yoshida E. Compatibility of FBR materials with sodium[J]. Journal of Nuclear Materials, 392, 249-254(2009).

[20] Brissonneau L. New considerations on the kinetics of mass transfer in sodium fast reactors: an attempt to consider irradiation effects and low temperature corrosion[J]. Journal of Nuclear Materials, 423, 67-78(2012).

[21] Cottis R A. Modelling corrosion in nuclear power plant systems[M]. Nuclear Corrosion Science and Engineering, 438-448(2012).

[22] Roy P, Licina G J. Interdependence of various parameters on corrosion of stainless steel heat exchanger material in flowing sodium[J]. American Society of Mechanical Engineers, 74-PWR-19(1974).

[23] Maruyama A, Nomura S, Kawai M et al. Recommended equation for corrosion rate of austenitic stainless steels in liquid sodium at elevated[J]. Journal of the Atomic Energy Society of Japan, 26, 327-338(1984).

[24] Thorley A, Tyzack C. Corrosion and mass transport of steel and nickel alloys in sodium systems[M]. Liquid Alkali Metals, 257-273(1973).

[25] Beskorovainyi N M, Krasin V P, Kirillov V B. Use of a quasichemical model for calculation of the parameters of the corrosion processes in sodium containing oxygen as an impurity[J]. Soviet Materials Science: a Transl of Fiziko-Khimicheskaya Mekhanika Materialov / Academy of Sciences of the Ukrainian SSR, 20, 429-432(1985).

[26] Cavell I W, Nicholas M G. Some observations concerned with the formation of sodium chromite on AISI 316 exposed to oxygenated sodium[J]. Journal of Nuclear Materials, 95, 129-144(1980).

[27] Jaech J, Dunn E, Stewart K B. Sodium mass transfer. xiv. statistical analysis of 1961 to 1964 sample weight change data[R](1965).

[28] Weeks J R, Isaacs H S, Fontana M G, Staehle R W. Corrosion and deposition of steels and nickel-base alloys in liquid sodium[M]. Advances in Corrosion Science and Technology, 1-66(1973).

[29] Shin S H, Lee J, Kim J H et al. Mechanism of corrosion of 9Cr and 12Cr ferritic/martensitic steels under oxygen-saturated sodium[J]. Corrosion Science, 112, 611-624(2016).

[30] Kolster B H. Mechanism of Fe and Cr transport by liquid sodium in non-isothermal loop systems[J]. Journal of Nuclear Materials, 55, 155-168(1975).

[31] Zhang J. Corrosion inhibition[M]. Liquid Metal Corrosion, 197-211(2023).

[32] Taylor J. Inhibition of liquid-metal corrosion[R](1956).

[33] Rouillard F, Courouau J L, Duprey B et al. Evaluation of the compatibility of aluminide coatings in high-temperature sodium for fast reactor application[J]. Oxidation of Metals, 88, 221-233(2017).

[34] Farwick D G, Johnson R N. Wear and corrosion performance of metallurgical coatings in sodium[J]. Thin Solid Films, 73, 145-153(1980).

[35] Lee J, Shin S H, Lee J K et al. Corrosion behavior of surface treated steel in liquid sodium negative electrode of liquid metal battery[J]. Journal of Power Sources, 307, 526-537(2016).

[36] Ravi Shankar A, Vetrivendan E, Shukla P K et al. Characterisation of ceramic-coated 316LN stainless steel exposed to high-temperature thermite melt and molten sodium[J]. Journal of Materials Engineering and Performance, 26, 5272-5283(2017).

[37] Suzuki T, Mutoh I, Fukutomi M. Corrosion resistance of ion-plated molybdenum thin-coating on austenitic steel in a flowing sodium environment[J]. Journal of Nuclear Materials, 144, 29-34(1987).

[38] Huang P C, Hou K H, Wang G L et al. Corrosion resistance of the Ni-Mo alloy coatings related to coating's electroplating parameters[J]. International Journal of Electrochemical Science, 10, 4972-4984(2015).