[1] Gao F. Study on the additive manufacture technology of titanium alloy synchronous feed powder[D]. Shenyang: Shenyang University of Technology(2018).

[2] Li D C, Tian X Y, Wang Y X et al[J]. Developments of additive manufacturing technology Electromachining & Mould, 2012, 20-22.

[3] Melchels F P W, Domingos M A N, Klein T J et al. . Additive manufacturing of tissues and organs[J]. Progress in Polymer Science, 37, 1079-1104(2012). http://www.sciencedirect.com/science/article/pii/S0079670011001328

[4] Baufeld B, van der Biest O, Gault R. Additive manufacturing of Ti-6Al-4V components by shaped metal deposition: microstructure and mechanical properties[J]. Materials & Design, 31, S106-S111(2010). http://www.sciencedirect.com/science/article/pii/S0261306909006529

[5] Murr L E, Martinez E, Amato K N et al. Fabrication of metal and alloy components by additive manufacturing: examples of 3D materials science[J]. Journal of Materials Research and Technology, 1, 42-54(2012). http://www.sciencedirect.com/science/article/pii/S2238785412700091

[6] Yin R K, Wang Q J, Gao Q et al. Microstructure and mechanical properties of new beta titanium alloy with heat treatment[J]. Chinese Journal of Rare Metals, 40, 415-420(2016).

[7] Liu Z Q, Xu G J, Ma R X et al. Properties of TiAl alloy prepared by additive manufacturing with laser coaxial powder feeding[J]. Chinese Journal of Lasers, 46, 0302016(2019).

[8] Zhang S Y, Lin X, Chen J et al. Influence of heat treatment on the microstructure and properties of Ti-6Al-4V titanium alloy by laser rapid forming[J]. Rare Metal Materials and Engineering, 36, 1263-1266(2007).

[9] Sun X M, Liu D, Tang H B et al. Effect of solution and aging heat treatment on microstructure of laser melting deposited TC17 alloy[J]. Hot Working Technology, 41, 226-229(2012).

[10] Xi M Z, Gao S Y. Heat-treated microstructures and mechanical properties of TA15 titanium alloy fabricated by laser rapid forming[J]. Chinese Journal of Lasers, 39, 0103007(2012).

[11] Vrancken B, Thijs L, Kruth J P et al. Heat treatment of Ti6Al4V produced by selective laser melting: microstructure and mechanical properties[J]. Journal of Alloys and Compounds, 541, 177-185(2012). http://www.sciencedirect.com/science/article/pii/S0925838812011826

[12] Yang G, Ma Y, Wang C et al. Effects of additive repair on microstructure and mechanical properties of laser additive manufactured TC4 titanium[J]. Chinese Journal of Lasers, 45, 1202002(2018).

[13] Shi B F, Zhang A F, Qi B L et al. Influence of heat accumulation on microstructure and property of Ti-6Al-4V in laser direct forming[J]. Laser Technology, 40, 29-32(2016).

[14] Zhang H Y, Wang W Y, Zhu Y M et al. Effect of solution aging on microstructure and mechanical properties of TC4 alloy[J]. Special Casting & Nonferrous Alloys, 34, 659-661(2014).

[15] Zhao Y Q, Hong Q, Ge P[M]. Metallographic maps of titanium and titanium alloys: nonferrous metals, 2-6(2011).

[16] Li C L, Lee D G, Mi X J et al. Phase transformation and age hardening behavior of new Ti-9.2Mo-2Fe alloy[J]. Journal of Alloys and Compounds, 549, 152-157(2013). http://www.sciencedirect.com/science/article/pii/S0925838812014673