[1] Leone C, Genna S, Tagliaferri F et al. Experimental investigation on laser milling of aluminium oxide using a 30 W Q-switched Yb∶YAG fiber laser[J]. Optics & Laser Technology, 76, 127-137(2016).

[2] Kibria G, Doloi B, Bhattacharyya B. Experimental investigation and multi-objective optimization of Nd∶YAG laser micro-turning process of alumina ceramic using orthogonal array and grey relational analysis[J]. Optics & Laser Technology, 48, 16-27(2013).

[3] Yao Y S, Chen Q B, Wang J et al. Water-jet assisted laser precision processing of Si3N4 ceramics[J]. Optics and Precision Engineering, 26, 2723-2731(2018).

[4] Biswas R, Kuar A S, Mitra S. Process optimization in Nd∶YAG laser microdrilling of alumina-aluminium interpenetrating phase composite[J]. Journal of Materials Research and Technology, 4, 323-332(2015).

[5] Lu F, Tian X L, Wu Z Y. Experiment on plasma arc thermal cutting of the engineering ceramics[J]. Journal of Academy of Armored Force Engineering, 21, 81-83(2007).

[6] Samant A N, Dahotre N B. Differences in physical phenomena governing laser machining of structural ceramics[J]. Ceramics International, 35, 2093-2097(2009).

[7] Karnakis D, Rutterford G, Knowles M et al. Laser micro-milling of ceramics, dielectrics and metals using nanosecond and picosecond lasers[J]. Proceedings of SPIE-The International Society for Optical Engineering, 6106, 6106131-6106134(2006).

[8] Xu Q, Shao Z S, Zhu S Z et al. Laser ablation behavior of ZrB2-ZrC ultra high temperature ceramics[J]. Rare Metal Materials and Engineering, 44, 533-536(2015).

[9] Li J, Ji L F, Hu Y et al. Experimental study on milling of Y-TZP ceramic by 532 nm laser[J]. Chinese Journal of Lasers, 42, 0806002(2015).

[10] Xu Z M, Hong Z H, Jiang S Q et al. Finite element simulation and experimental research in laser milling of Al2O3 ceramic[J]. Acta Optica Sinica, 34, s214009(2014).

[11] Wang L, Huang C Z, Wang J et al. An experimental investigation on laser assisted waterjet micro-milling of silicon nitride ceramics[J]. Ceramics International, 44, 5636-5645(2018).

[12] Pham D T, Dimov S S, Petkov P V. Laser milling of ceramic components[J]. International Journal of Machine Tools and Manufacture, 47, 618-626(2007).

[13] Umer U, Mohammed M K, Al-Ahmari A. Multi-response optimization of machining parameters in micro milling of alumina ceramics using Nd∶YAG laser[J]. Measurement, 95, 181-192(2017).

[14] Kibria G, Doloi B, Bhattacharyya B. Investigation into the effect of overlap factors and process parameters on surface roughness and machined depth during micro-turning process with Nd∶YAG laser[J]. Optics & Laser Technology, 60, 90-98(2014).

[15] Campanelli S L, Casalino G, Contuzzi N. Multi-objective optimization of laser milling of 5754 aluminum alloy[J]. Optics & Laser Technology, 52, 48-56(2013).

[16] Yuan G F, Zeng X Y. Experimental study of laser milling on Al2O3 ceramics[J]. Chinese Journal of Lasers, 30, 467-470(2003).

[17] Zhou J Z, She J, Huang S et al. Research of aluminum/steel dissimilar metal laser welding-brazing and parameter optimization based on RSM[J]. Chinese Journal of Lasers, 42, s103004(2015).

[18] Liu Y, Zhang J, Pang Z C et al. Investigation into the influence of laser energy input on selective laser melted thin-walled parts by response surface method[J]. Optics and Lasers in Engineering, 103, 34-45(2018).

[19] Chu Z T, Yu Z S, Zhang P L et al. Weld profile prediction and process parameters optimization of T-joints of laser full penetration welding via response surface methodology[J]. Chinese Journal of Lasers, 42, 0203006(2015).

[20] Senthilkumar B, Kannan T. Sensitivity analysis of flux cored arc welding process variables in super duplex stainless steel claddings[J]. Procedia Engineering, 64, 1030-1039(2013).

[21] Cheng Q, Zhao H W, Zhang G J et al. An analytical approach for crucial geometric errors identification of multi-axis machine tool based on global sensitivity analysis[J]. The International Journal of Advanced Manufacturing Technology, 75, 107-121(2014).

[22] Tian X J, Liu Y H, Deng W et al. Sensitivity analysis for process parameters influencing electric arc cutting[J]. The International Journal of Advanced Manufacturing Technology, 78, 481-492(2015).

[23] Huang J, Chen Z B, Liu Q M et al. Multi-objective optimization for laser closure process parameters in vitro skin tissue based on NSGA-Ⅱ[J]. Chinese Journal of Lasers, 46, 0207001(2019).