[1] [1] JIANG H Y, LIN W K, WU Sh B, et al.Application status and development trend of laser selective melting technology［J］. Mechanical Engineering and Automation, 2019, 3(5): 223-226(in Chinese).

[2] [2] WU Zh Q, LAI K X. Status quo and development of laser melting rapid prototyping technology in metal parts selection［J］. Infrared and Laser Engineering, 2006,17(s3): 399-404(in Chinese).

[3] [3] HE X R, YANG Y Q, WANG D, et al. Direct manufacturing of customized crowns and fixed bridge by selectivelaser melting［J］. Laser Technology, 2010, 34(1): 1-4(in Chinese).

[4] [4] CHEN J T, GUO Z Y, WANG Ch Y, et al. Research status of Ti-6Al-4V manufactured by selective laser melting for medical device applications［J］. Laser Technology, 2020, 44(3): 288-298(in Chin-ese).

[5] [5] NI C. Research on key technologies in selective laser melting of micro-channel heat exchanger ［D］.Changchun: Changchun University of Science and Technology, 2021:21-139(in Chinese).

[6] [6] ATTALLA M, MAGHRABIE H M, SPECHT E, et al. An experimental investigation on fluid flow and heat transfer of rough mini-channel with rectangular cross section［J］. Experimental Thermal and Fluid Science, 2016,75:199-210.

[7] [7] GAO C R, PAN H, QIU Ch L, et al. FEM simulation of inner void defects in plastic die steel during upsetting process［J］. Journal of Iron and Steel Research, 2019, 4(6): 547-552(in Chinese).

[8] [8] LI B, DAI Sh B, GU H, et al. Influence of SLM sloping angle on forming accuracy of 316L stainless steel［J］. Applied Laser, 2021, 41(3): 454-459(in Chinese).

[9] [9] WEI J F, WU M P, HAN J T. Effect mechanism of scanning strategy on surface quality of Inconel 718 by SLM［J］. Applied Laser, 2020, 40(4): 621-625(in Chinese).

[10] [10] MAJEED A, LYU J X,ZHANG Y F, et al. An investigation into the influence of processing parameters on the surface quality of AlSi10Mg parts by SLM process［C］//Proceedings of the 2019 16th International Bhurban Conference on Applied Sciences and Technology(IBCAST). Islamabad, Pakistan: IEEE, 2019:143-147.

[11] [11] PAKKANEN J, CALIGNANO F, TREVISAN F, et al. Study of internal channel surface roughnesses manufactured by selective laser melting in aluminum and titanium alloys［J］. Metallurgical & Materials Transactions A, 2016, 47(8): 3837-3844.

[12] [12] PAGGI U, SINICO M, THIJS L, et al. Improving the dimensional accuracy of downfacing surfaces of additively manufactured parts ［C］// Proceedings of the 2019 Euspen and ASPE Special Interest Group Meeting. Nantes, France:KE LEUVEN, 2019:35-38.

[13] [13] WILDGOOSE A J, THOLE K A, SANDERS P, et al. Impact of additive manufacturing on internal cooling channels with varying diameters and build directions ［C/OL］.(2020-06-26)［2022-09-08］.https://www.researchgate.net/publication/348534802_Impact_of_Additive_Manufacturing_on_Internal_Cooling_Channels_With_Varying_Diameters_and_Build_Directions.

[14] [14] LU J B, YANG Y Q, WANG D, et al. Analysis of affecting factors of overhanging surface quality by selective laser melting［J］. Laser Technology, 2011, 35(2): 148-151(in Chinese).

[15] [15] CHEN B B, JIANG X F, DONG X T, et al. Analysis of affecting factors of horizontal overhanging surface forming quality by selective laser melting［J］. Applied Laser, 2021, 41(4):781-792(in Chin-ese).

[16] [16] BRANDAU B, da SILVA A, WILSNACK C, et al. Absorbance study of powder conditions for laser additive manufacturing［J］. Materials & Design, 2022,216: 110591.

[17] [17] LIU B, LU Sh Y, LI Zh H, et al. Research on heat treatment process of CuSn10 alloy fabricated by selective laser melting［J］. Hot Working Technology, 2022,51(4): 121-125(in Chinese).

[18] [18] SONG C H, YANG Y Q, YANG L, et al. Study on manufacturing of W-Cu alloy thin wall parts by selective laser melting［J］. International Journal of Advanced Manufacturing Technology, 2015, 78(5): 885-893.

[19] [19] ZHANG S, ZHU H, ZHANG L, et al. Microstructure and properties of high strength and high conductivity Cu-Cr alloy components fabricated by high power selective laser melting［J］. Materials Letters, 2018, 237(15): 306-309.

[20] [20] MA Z, ZHANG K, REN Z, et al. Selective laser melting of Cu-Cr-Zr copper alloy: Parameter optimization, microstructure and mechanical properties［J］. Journal of Alloys and Compounds, 2020, 828(11): 154350.

[21] [21] MA Z, ZHANG D Z, LIU F, et al. Lattice structures of Cu-Cr-Zr copper alloy by selective laser melting: Microstructures, mechanical properties and energy absorption［J］. Materials & Design, 2019, 187: 108406.

[22] [22] WALLIS C, BUCHMAYR B. Effect of heat treatments on microstructure and properties of CuCrZr produced by laser-powder bed fusion［J］. Materials Science and Engineering, 2019, 744: 215-233.

[23] [23] SHI W H, ZHANG S, LI J F,et al. Multi-objectives optimization of cutting parameters in ball-nose milling based on surface topography simulation model［J］. Tool Engineering,2018,52(6):41-45.