[1] YIN F, RAO A G. Performance analysis of an aero engine with inter-stage turbine burner[J]. The Aeronautical Journal, 1605(2017).

[2] SRINIVAS G, RAGHUNANDANA K, SATISH SHENOY B. Recent developments in turbomachinery component materials and manufacturing challenges for aero engine applications[conf-proc]. IOP Conference Series: Materials Science and Engineering, 012012(2018).

[3] LIN Z M. The current development and future trends of fighter engines[J]. Aeroengine, 1(2006).

[4] BERGS T, GRÜNEBAUM T, FRICKE K et al. Life cycle assessment for milling of Ti-and Ni-based alloy aero engine components[J]. Procedia CIRP, 625(2021).

[5] WANG X G, LIU J L, JIN T et al. Tensile behaviors and deformation mechanisms of a nickel-base single crystal superalloy at different temperatures[J]. Materials Science and Engineering: A, 154(2014).

[6] ZHANG G, ZHANG Y, ZHENG L et al. Research progress in powder metallurgy superalloys and manufacturing technologies for aero-engine application[J]. Acta Metallurgica Sinica, 1133(2019).

[7] FAN X, YIN X. Progress in research and development on matrix modification of continuous fiber-reinforced silicon carbide matrix composites[J]. Advanced Composites and Hybrid Materials, 685(2018).

[8] PADTURE N P. Advanced structural ceramics in aerospace propulsion[J]. Nature Materials, 804(2016).

[9] KARADIMAS G, SALONITIS K. Ceramic matrix composites for aero engine applications--a review[J]. Applied Sciences, 3017(2023).

[10] KATOH Y, SNEAD L L, HENAGER J C H et al. Current status and recent research achievements in SiC/SiC composites[J]. Journal of Nuclear Materials, 387(2014).

[11] DICARLO J A, YUN H M, MORSCHER G N et al[M]. SiC/SiC composites for 1200 ℃ and above//BANSAL N P. Handbook of ceramic composites, 77-98(2005).

[12] LUTHRA K L, CORMAN G S. Melt infiltrated (MI) SiC/SiC composites for gas turbine applications//KRENKEL W, NASLAIN R, SCHNEIDER H. High temperature ceramic matrix composites[J]. Ohio: Wiley-American Ceramic Society, 744-753(2001).

[14] ISHIKAWA T, KAJII S, MATSUNAGA K et al. A tough, thermally conductive silicon carbide composite with high strength up to 1600 ℃ in air[J]. Science, 1295(1998).

[15] HO C Y, TSAI S C, LIN H T et al. Microstructural investigation of Si-ion-irradiated single crystal 3C-SiC and SA-Tyrannohex SiC fiber-bonded composite at high temperatures[J]. Journal of Nuclear Materials, 1(2013).

[16] XU Z M, YU Y P, WANG S et al. Research progress of SiC fiber-bonded ceramics[J]. Journal of Material Engineering, 23(2023).

[17] VERA M C, MARTÍNEZ-FERNÁNDEZ J, SINGH M et al. Strength and thermal shock resistance of Si-Al-C-O and Si-Ti-C-O fiber-bonded ceramics[J]. International Journal of Applied Ceramic Technology, 1126(2022).

[18] GOU Y, WANG H, JIAN K. Formation of carbon-rich layer on the surface of SiC fiber by sintering under vacuum for superior mechanical and thermal properties[J]. Journal of the European Ceramic Society, 907(2017).

[19] ZHANG Y, CHEN J, YAN D et al. Conversion of silicon carbide fibers to continuous graphene fibers by vacuum annealing[J]. Carbon, 435(2021).

[21] YAMAMOTO H, BABA Y, SASAKI T A. Electronic structures of N²⁺ and O²⁺ ion-implanted Si (100)[J]. Surface and Interface Analysis, 381(1995).

[22] KAJII S, MATSUNAGA K, SATO M et al. Mechanical behavior of SiC-Polycrystalline fiber-bonded-cermics[conf-proc]. 28th International Conference on Advanced Ceramics and Composites B:Ceramic Engineering and Science Proceedings, Hoboken, 43-48(2004).

[23] CORMAN G S, LUTHRA K L[M]. Silicon melt infiltrated ceramic composites (HiPerComp™)//BANSAL N P. Handbook of ceramic composites, 99-115(2005).

[24] ZHANG J, ZHANG Y, WANG Y et al. Long-term oxidation performance of SiC_f/SiC composites at 1200 ℃ in air atmosphere manufactured by PIP and hybrid CVI/PIP techniques[J]. Ceramics International, 10259(2024).