[1] Dong C L, Tan J H, Lin Z C et al. Research progress of titanium alloy additive manufacturing technology[J]. MW Metal Forming, 16-21(2020).

[2] Liu S Y, Shin Y C. Additive manufacturing of Ti6Al4V alloy: a review[J]. Materials & Design, 164, 107552(2019).

[3] Li C F, Ren H X, Bu J Q et al. Study on microstructures and properties of additive manufactured Ti-6Al-4V alloy with boron[J]. Chinese Journal of Lasers, 48, 1802014(2021).

[4] Liu Z Y, He B, Lü T Y et al. A review on additive manufacturing of titanium alloys for aerospace applications: directed energy deposition and beyond Ti-6Al-4V[J]. JOM, 73, 1804-1818(2021).

[5] Lin Z D, Song K J, Yu X H. A review on wire and arc additive manufacturing of titanium alloy[J]. Journal of Manufacturing Processes, 70, 24-45(2021).

[6] Herzog D, Seyda V, Wycisk E et al. Additive manufacturing of metals[J]. Acta Materialia, 117, 371-392(2016).

[7] Gu D D, Zhang H M, Chen H Y et al. Laser additive manufacturing of high-performance metallic aerospace components[J]. Chinese Journal of Lasers, 47, 0500002(2020).

[8] Zhang M. Research on laser additive manufacturing characteristics of titanium alloy with powder and wire[D], 52-54(2013).

[9] Ding D H, Pan Z X, Cuiuri D et al. Wire-feed additive manufacturing of metal components: technologies, developments and future interests[J]. The International Journal of Advanced Manufacturing Technology, 81, 465-481(2015).

[10] Liu S, Brice C, Zhang X L. Comprehensive quality investigations of wire-feed laser additive manufacturing by learning of experiments data[EB/OL]. https:∥　arxiv.org/abs/2103.12662

[11] Li K B, Li D, Liu D Y et al. Research of fiber laser cladding repairing process with wire feeding[J]. Chinese Journal of Lasers, 41, 1103006(2014).

[12] Brandl E, Michailov V, Viehweger B et al. Deposition of Ti-6Al-4V using laser and wire, part II: hardness and dimensions of single beads[J]. Surface and Coatings Technology, 206, 1130-1141(2011).

[13] Mok S H, Bi G J, Folkes J et al. Deposition of Ti-6Al-4V using a high power diode laser and wire, Part I: Investigation on the process characteristics[J]. Surface and Coatings Technology, 202, 3933-3939(2008).

[14] Wang C, Suder W, Ding J L et al. Wire based plasma arc and laser hybrid additive manufacture of Ti-6Al-4V[J]. Journal of Materials Processing Technology, 293, 117080(2021).

[15] Yao X J, Wang J W, Yang Y C et al. Review on defect formation mechanisms and control methods of metallic components during laser additive manufacturing[J]. Chinese Journal of Lasers, 49, 1402802(2022).

[16] Wu B T, Pan Z X, Ding D H et al. A review of the wire arc additive manufacturing of metals: properties, defects and quality improvement[J]. Journal of Manufacturing Processes, 35, 127-139(2018).

[17] Fritz K, Kristian A, Nils K et al. Wire-based laser metal deposition for additive manufacturing of TiAl6V4: basic investigations of microstructure and mechanical properties from build up parts[J]. Proceedings of SPIE, 10095, 100950U(2017).

[18] Maleki E, Bagherifard S, Bandini M et al. Surface post-treatments for metal additive manufacturing: progress, challenges, and opportunities[J]. Additive Manufacturing, 37, 101619(2021).

[19] Shaikh M O, Chen C C, Chiang H C et al. Additive manufacturing using fine wire-based laser metal deposition[J]. Rapid Prototyping Journal, 26, 473-483(2019).

[20] Demir A G. Micro laser metal wire deposition for additive manufacturing of thin-walled structures[J]. Optics and Lasers in Engineering, 100, 9-17(2018).

[21] Li B B, Wang B W, Zhu G et al. Low-roughness-surface additive manufacturing of metal-wire feeding with small power[J]. Materials, 14, 4265(2021).

[22] Wen P, Zheng S Q, Shinozaki K et al. Experimental research on laser narrow gap welding with filling hot wire[J]. Chinese Journal of Lasers, 38, 1103004(2011).

[23] Liu S, Liu W, Kovacevic R. Experimental investigation of laser hot-wire cladding[J]. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 231, 1007-1020(2017).

[24] Baufeld B, Brandl E, van der Biest O. Wire based additive layer manufacturing: comparison of microstructure and mechanical properties of Ti-6Al-4V components fabricated by laser-beam deposition and shaped metal deposition[J]. Journal of Materials Processing Technology, 211, 1146-1158(2011).