[1] Dahl J M[J]. 铁基航空合金的新要求 航空科学技术, 2004, 43-45.

[2] Ye W B. Development of secondary hardening ultra high strength alloy A100[J]. Special Steel Technology, 20, 14-16(2014).

[3] Li Z, Zhao Z Y. Research and development of AerMet100 steel[J]. Journal of Aeronautical Materials, 26, 265-270(2006).

[4] Liu P, Wang X D, Cai J P et al[J]. Corrosion behaviour of low hydrogen brittleness brush plating cadmium on A100 steel in marine environment Journal of Materials Engineering, 2012, 54-58.

[5] Ran X Z, Cheng H, Wang H M et al. Corrosion properties of laser melting-deposited corrosion-resistant ultrahigh strength steel AerMet100[J]. Transactions of Materials and Heat Treatment, 33, 126-131(2012).

[6] Cheng H, Liu D, Tang H B et al. Effect of hot isostatic pressing on fatigue properties of laser melting deposited AerMet100 steel[J]. Journal of Iron and Steel Research International, 20, 79-84(2013). http://kns.cnki.net/KCMS/detail/detail.aspx?filename=ying201311013&dbname=CJFD&dbcode=CJFQ

[7] Hu Y B, Dong C F, Sun M et al. Effects of solution pH and Cl - on electrochemical behaviour of an AerMet100 ultra-high strength steel in acidic environments [J]. Corrosion Science, 53, 4159-4165(2011). http://www.sciencedirect.com/science/article/pii/S0010938X11004379

[8] Alenius M, Pohjanne P, Somervuori M et al. Exploring the mechanical properties of spot welded dissimilar joints for stainless and galvanized steels[J]. Welding Journal, 85, 305s-313s(2016). http://www.researchgate.net/publication/286865450_Exploring_the_Mechanical_Properties_of_Spot_Welded_Dissimilar_Joints_for_Stainless_and_Galvanized_Steels

[9] Spalding I J. High power lasers: their industrial and fusion applications[J]. Optics and Laser Technology, 12, 187-197(1980). http://www.sciencedirect.com/science/article/pii/003039928090119X

[10] Loosen P, Treusch H G, Haas C R et al. High-power diode lasers and their direct industrial applications[C]. SPIE, 2382, 78-88(1995).

[11] Yang J X, Liu F L, Miao X H et al. Influence of laser cladding process on the magnetic properties of WC-FeNiCr metal-matrix composite coatings[J]. Journal of Materials Processing Technology, 212, 1862-1868(2012). http://www.sciencedirect.com/science/article/pii/S0924013612001227

[12] Yang J X, Xiao Z Y, Miao X H et al. The effect of Ti additions on the microstructure and magnetic properties of laser clad FeNiCr/60%WC coatings[J]. International Journal of Refractory Metals & Hard Materials, 52, 6-11(2015).

[13] Guo C Y, Guo X J, Liu C et al[J]. Research on process of A-100 steel laser forming parts in the field of aircraft landing gear manufacturing New Technology & New Process, 2015, 71-74.

[14] Wang Y M. Effects of laser melting on microstructure and mechanical properties of 304 austenitic stainless steel[D]. Hengyang: University of South China(2013).

[15] Li M Y, Wang Y, Han B et al. Structure and properties of high-Cr steel roller by laser surface melting[J]. Chinese Journal of Lasers, 36, 498-502(2009).

[16] Wang Z H, Wang H M, Liu D. Microstructure and mechanical properties of AF1410 ultra-high strength steel using laser additive manufacture technique[J]. Chinese Journal of lasers, 43, 0403001(2016).

[17] Hou H P, Liang Y C, He Y L et al. Microstructural evolution and tensile property of Hastelloy-X alloys produced by selective laser melting[J]. Chinese Journal of lasers, 44, 0202007(2017).

[18] Luo K Y, Zhou Y, Lu J Z et al. Influence of laser shock peening on microstructure and property of cladding layer of 316L stainless steel[J]. Chinese Journal of lasers, 44, 0402005(2017).

[19] Sun S S, Li Z Y, Cai B C et al. The influence of laser hardening on contact fatigue of hypoeutectoid steel[J]. Chinese Journal of lasers, 43, 0802011(2016).

[20] Zhou K S, Deng C M, Liu M et al. Characterizations of fatigue and salt spray corrosion resistance of HVAF sprayed WC-17Co and WC-10Co4Cr coatings on the substrate of 300M steel[J]. Rare Metal Materials and Engineering, 38, 671-676(2009).