[1] [1] Zhang Kecong, Zhang Lehui. Crystal growth of science and technology[M]. Beijing: Science Press, 2003: 370.

[2] [2] Yong Seok Choi, Seong Jin Kim. Sapphire substrate-transferred nitride-based light-emitting diode fabricated by sapphire wet etching technique[J]. Solid-State Electronics, 2006, 50(9): 1522-1528.

[3] [3] Liu Yang, Xu Wendong, Zhao Chengqiang, et al.. A detecting system of sapphire internal defects based on laser light scattering tomography[J]. Chinese J Lasers, 2014, 41(9): 0902007.

[4] [4] Y P Hsu, S J Chang, Y K Su, et al.. ICP etching of sapphire substrates[J]. Optical Materials, 2005, 27: 1171-1174.

[5] [5] Xie Xiaozhu, Che Ronghong, Wei Xin, et al.. Study on the technological rule of laser-induced backside wet etching sapphire substrates[J]. Applied Laser Technology, 2015, 35(2): 236-241.

[6] [6] Ji Lingfei, Ling Chen, Li Qiurui, et al.. Research progress and development of industrial application of picosecond laser processing[J]. Journal of Mechanical Engineering, 2014, 50(5): 115-126.

[7] [7] Zhao Fanghai, Wang Qingya, Ren Linfu. Ablation of diamond thin film by excimer laser[J]. Acta Scientiarum Naturalium Universitatis Jilinensis, 1994, (2): 79-80.

[8] [8] Jiang Chao, Wang Youqing, Hu Shaoliu. Development and expectation of laser polishing technology[J]. Laser Technology, 2002, 26(6): 421-424.

[9] [9] Xiang Shibiao, Xiang Xu, Feng Changgen. Analysis on action characteristic of laser upon energetic materials[J]. Laser & Infrared, 2002: 32(4): 233-236.

[10] [10] Hua Xiangang, Wei Xin, Zhou Min, et al.. Experimental study on mechanism of 355 nm ultraviolet laser polishing of Al2O3 ceramics[J]. Chinese J Lasers, 2014, 41(12): 1203002.

[11] [11] Horisawa H, Emura H, Yasunaga N. Surface machining characteristics of sapphire with fifth harmonic YAG laser pulses[J]. Vacuum, 2004, 73(s 3-4): 661-664.

[12] [12] Stoian R, Rosenfled A, Ashkenasi D, et al..Surface charging and impulsive ion ejection during ultrashort pulsed laser ablation[J]. Physics Review Letters, 2002, 88(9): 097603.

[13] [13] Tam A, Brand J, Cheng D, et al.. Picosecond laser sputtering of sapphire at 266 nm[J]. Applied Physics Letters, 1989, 55(20): 2045-2047.

[14] [14] Huang Jiafu, Wei Xin, Xie Xiaozhu, et al.. Research on influences of condition parameters on laser polishing process[J]. Laser & Optoelectronics Progress, 2008, 45(12): 20-24.

[15] [15] Yang Jianjun. Femtosecond laser “cold” micro-machining and its advanced applications[J]. Laser & Optoelectronics Progress, 2004, 41(3): 42-52.

[16] [16] Cao Wenshen, Zhao Yan, Wu Yan, et al.. Super-hydrophobic surface of polytetrafluoroethylene fabricated by picosecond laser and phenomenon of total internal reflection underwater[J]. Chinese J Lasers, 2014, 41(9): 0903008.

[17] [17] Liu Shuang, Liu Xin, Tang Wenlong, et al.. Study of Ti:Sapphiredouble waveguide written by femtosecond laser[J]. Chinese J Lasers, 2015, 42(2): 0203001.

[18] [18] Chen Sumei, Zhao Peide, Zhang Yong, et al.. Nonlinear transmittance based on transient behavior of an ultra-short pulse laser[J]. Acta Optica Sinica, 2015, 35(2): 0232001.

[19] [19] Chang Liang, Chen Meng, Li Gang, et al.. Thermal characteristic analysis of laser diode side-pumped regenerative amplifier for kHz picosecond laser[J]. Chinese J Lasers, 2010, 37(3): 873-876.

[20] [20] Zhang Bingyuan, Li Gang, Chen Meng. Passive mode-locking of a diode-end-pumped Nd:GdVO4 laser with a semiconductor saturable absorber mirror[J]. Optics Letters, 2003, 28(19): 1829-1831.