[1] Viano D M, Ahmed N U, Schumann G O. Influence of heat input and travel speed on microstructure and mechanical properties of double tandem submerged arc high strength low alloy steel weldments[J]. Science and Technology of Welding and Joining, 5, 26-34(2000).

[2] Amodeo C M, Lai W J, Lee J et al. Failure modes of gas metal arc welds in lap-shear specimens of high strength low alloy (HSLA) steel[J]. Engineering Fracture Mechanics, 131, 74-99(2014).

[3] Zou Z D, Li Y J, Yin S K. Toughness and TEM analysis of simulated CGHAZ of HQ130 steel[J]. Transactions of the China Welding Institution, 19, 141-146(1998).

[4] Si Z H. Processing research of MAG welding for WELDOX960 high-tensile steel[J]. Aerospace Manufacturing Technology, 21-24(2012).

[5] Lan L Y, Kong X W, Qiu C L et al. Influence of microstructural aspects on impact toughness of multi-pass submerged arc welded HSLA steel joints[J]. Materials & Design, 90, 488-498(2016).

[6] Pamnani R, Jayakumar T, Vasudevan M et al. Investigations on the impact toughness of HSLA steel arc welded joints[J]. Journal of Manufacturing Processes, 21, 75-86(2016).

[7] Xu B, Ma C Y, Li L et al. Effect of heat input on microstructure and property of weld joints of a 1200 MPa grade HSLA steel[J]. Chinese Journal of Materials Research, 31, 129-135(2017).

[8] Anant R, Ghosh P K. Ultra-narrow gap welding of thick section of austenitic stainless steel to HSLA steel[J]. Journal of Materials Processing Technology, 239, 210-221(2017).

[9] Cai X Y, Fan C L, Lin S B et al. Molten pool behaviors and weld forming characteristics of all-position tandem narrow gap GMAW[J]. The International Journal of Advanced Manufacturing Technology, 87, 2437-2444(2016).

[10] Cai X Y, Lin S B, Fan C L et al. Molten pool behavior and weld forming mechanism of tandem narrow gap vertical GMAW[J]. Science and Technology of Welding and Joining, 21, 124-130(2016).

[11] Sokolov M, Salminen A, Kuznetsov M et al. Laser welding and weld hardness analysis of thick section S355 structural steel[J]. Materials & Design, 32, 5127-5131(2011).

[12] Zhan X, Zhang D, Wei Y et al. Research on the microstructure and properties of laser-MIG hybrid welded Joint of Invar alloy[J]. Optics & Laser Technology, 97, 124-136(2017).

[13] Chen C, Wang W Y, Li D Y et al. Effect of beam oscillation on microstructure and properties of laser-TIG hybrid welding of D406A ultra-high strength steel[J]. Journal of Manufacturing Processes, 57, 798-805(2020).

[14] Silva R G N, Paço C M M, Rodrigues M B et al. A comparison between LBW and hybrid laser-GMAW processes based on microstructure and weld geometry for hardenable steels[J]. The International Journal of Advanced Manufacturing Technology, 110, 2801-2814(2020).

[15] Gao M, Zeng X Y, Yan J et al. Microstructure characteristics of laser-MIG hybrid welded mild steel[J]. Applied Surface Science, 254, 5715-5721(2008).

[16] Hu L H, Huang J, Liu C T et al. Effects of coupling between the laser plasma and two arcs on metal transfer in CO2 laser double-wire MIG hybrid welding[J]. Optics & Laser Technology, 105, 152-161(2018).

[17] Ren W J, Zheng H J, Li Z G et al. Effects of pulse arc on droplet transfer and spatter of laser pulsed-arc hybrid welding[J]. Chinese Journal of Lasers, 47, 0402007(2020).

[18] Zhang W, Tang B, Guo Y B et al. Investigation on surface forming and stability of laser + pulse melting gas metal arc hybrid welding[J]. Laser & Optoelectronics Progress, 57, 171401(2020).

[19] Chen Z W, Ma C Y, Chen B et al. Microstructure and properties of medium-thick stainless steel by laser-MIG hybrid welding[J]. Laser & Optoelectronics Progress, 57, 231405(2020).

[20] Cao X, Wanjara P, Huang J et al. Hybrid fiber laser-arc welding of thick section high strength low alloy steel[J]. Materials & Design, 32, 3399-3413(2011).

[21] Li H Y, Tan C W, Zhang Q et al. Effect of heat source order on coupling mechanism and mechanical properties of joints in laser-arc hybrid welding of HG785D high-strength steels[J]. Chinese Journal of Lasers, 45, 0502006(2018).