Study on Influence of Key Parameters by <i>In</i>‐<i>Situ</i> Observation of Ultrafast Laser Drilling Process

Zhanwen A; Kuan Zhao; Tianlei Zhang; Pengzhe Zhang; Yutong Liu; Guisheng Zou

doi:10.3788/CJL241108

Chinese Journal of Lasers, Volume. 52, Issue 4, 0402406(2025)

Study on Influence of Key Parameters by In‐Situ Observation of Ultrafast Laser Drilling Process

Zhanwen A^1,3, Kuan Zhao¹, Tianlei Zhang², Pengzhe Zhang², Yutong Liu², and Guisheng Zou^3、*

Author Affiliations

¹School of Mechanical Engineering, Qinghai University, Xining 810016, Qinghai , China

²Beijing Institute of Remote Sensing Equipment, Beijing 100854, China

³Department of Mechanical Engineering, Tsinghua University, Beijing 100084, China

show less

Abstract Get PDF(in Chinese)

References(23)

[1] Zhang W W, Guo C H, Zhang T R et al. Advanced film cooling technology of turbine blades and progress in relevant laser drilling technology[J]. Aeronautical Manufacturing Technology, 59, 26-31(2016).

[2] Mei X S, Yang Z X, Zhao W Q. Laser hole drilling on surface of electronic ceramic substrates[J]. Chinese Journal of Lasers, 47, 0500011(2020).

[3] Zhao W Q, Mei X S, Yang Z X. Review on morphological features and process control of holes drilled by pulsed laser on surface of electronic ceramic substrates[J]. Chinese Journal of Lasers, 49, 1002403(2022).

[4] Zhang C, Li M, Ye B C et al. Electrons dynamics control micro-hole drilling using temporally/spatially shaped femtosecond laser[J]. Opto-Electronic Engineering, 49, 0210389(2022).

[5] Du K, Li X W, Yang B D et al. Research progress of femtosecond laser microhole drilling on non-metallic materials[J]. Laser & Optoelectronics Progress, 57, 111417(2020).

[6] Luzius S, Sailer M, Siebert C et al. PCB drilling with high power picosecond lasers[J]. Physics Procedia, 41, 723-726(2013).

[7] Zheng L J, Wang C Y, Fu L Y et al. Wear mechanisms of micro-drills during dry high speed drilling of PCB[J]. Journal of Materials Processing Technology, 212, 1989-1997(2012).

[8] Kim K R, Cho J H, Lee N Y et al. High-precision and ultrafast UV laser system for next-generation flexible PCB drilling[J]. Journal of Manufacturing Systems, 38, 107-113(2016).

[9] Gautam G D, Pandey A K. Pulsed Nd: YAG laser beam drilling: a review[J]. Optics & Laser Technology, 100, 183-215(2018).

[10] Wei X Y, Wen Q L, Lu J et al. Research on parameters optimization of diamond microgrooves processed by ultravilot nanosecond laser[J]. Chinese Journal of Lasers, 49, 1002406(2022).

[11] Dong C Y, Zhang X Y, Gu D H et al. Analysis of diamond micropores forming and defects characteristics under different laser powers[J]. Chinese Journal of Lasers, 50, 2402404(2023).

[12] A Z W, Zou G S, Zhao W Z et al. The mechanism of irregular hole-shape formation during ultrafast laser micro-drilling of metals[J]. Applied Physics A, 129, 120(2023).

[13] Wang R J, Dong X, Wang K D et al. Investigation on millijoule femtosecond laser spiral drilling of micro-deep holes in thermal barrier coated alloys[J]. The International Journal of Advanced Manufacturing Technology, 114, 857-869(2021).

[14] Kraus M, Ahmed M A, Michalowski A et al. Microdrilling in steel using ultrashort pulsed laser beams with radial and azimuthal polarization[J]. Optics Express, 18, 22305-22313(2010).

[15] Ren N F, Xia K B, Wang H X et al. Transient thermal analysis for circular laser hole-cutting in stable stainless steel sheets using a novel rotational pulsed-laser heat source model[J]. Optics & Laser Technology, 141, 107041(2021).

[16] Webster P J L, Yu J X Z, Leung B Y C et al. In situ 24 kHz coherent imaging of morphology change in laser percussion drilling[J]. Optics Letters, 35, 646-648(2010).

[17] Zhang Y, Li S C, Chen G Y et al. Experimental observation and simulation of keyhole dynamics during laser drilling[J]. Optics & Laser Technology, 48, 405-414(2013).

[18] Zhao X, Shin Y C. Femtosecond laser drilling of high-aspect ratio microchannels in glass[J]. Applied Physics A, 104, 713-719(2011).

[19] Döring S, Richter S, Tünnermann A et al. Evolution of hole depth and shape in ultrashort pulse deep drilling in silicon[J]. Applied Physics A, 105, 69-74(2011).

[20] Döring S, Szilagyi J, Richter S et al. Evolution of hole shape and size during short and ultrashort pulse laser deep drilling[J]. Optics Express, 20, 27147-27154(2012).

[21] Arntz D, Petring D, Jansen U et al. Advanced trim-cut technique to visualize melt flow dynamics inside laser cutting kerfs[J]. Journal of Laser Applications, 29, 022213(2017).

[22] Arntz D, Petring D, Stoyanov S et al. In situ visualization of multiple reflections on the cut flank during laser cutting with 1 μm wavelength[J]. Journal of Laser Applications, 30, 032206(2018).

[23] A Z W, Zou G S, Yu H et al. Polarization-dependent, beam reflection-regulated hole shaping dynamics visualized by in situ imaging of ultrafast laser drilling process[J]. Precision Engineering, 86, 153-159(2024).

Tools

Get Citation

Copy Citation Text

Zhanwen A, Kuan Zhao, Tianlei Zhang, Pengzhe Zhang, Yutong Liu, Guisheng Zou. Study on Influence of Key Parameters by In‐Situ Observation of Ultrafast Laser Drilling Process[J]. Chinese Journal of Lasers, 2025, 52(4): 0402406

Download Citation

EndNote(RIS)BibTex Plain Text

Set citation alerts for article

Save article for my favorites

Paper Information

Category: Laser Micro-Nano Manufacturing

Received: Aug. 1, 2024

Accepted: Sep. 18, 2024

Published Online: Jan. 20, 2025

The Author Email: Zou Guisheng (zougsh@tsinghua.edu.cn)

DOI:10.3788/CJL241108

CSTR:32183.14.CJL241108

Topics

laser devices and laser physics

Lasers and Laser Optics

Laser physics

laser manufacturing

Instrumentation, Measurement and Metrology