[1] [1] Liu J B. Investigation on surface CMP ultra-smooth process technology of advanced plastic mould steel S136［D］. Beijing: North China Electric Power University, 2015.

[2] [2] Shiou F J, Chen C H. Freeform surface finish of plastic injection mold by using ball-burnishing process［J］. Journal of Materials Processing Technology, 2003, 140(1/2/3): 248-254.

[3] [3] Zhang Q B, Zhou T H. Corrosion behavior of AZ91D magnesium alloy in automotive engine coolant［J］. Materials Protection, 2015,48(7): 55-57.

[4] [4] Hu J P, Liu Z Y, Hu S S, et al. Stress corrosion behavior of 304 stainless steel in simulated deep and shallow seawater environments［J］. Surface Technology, 2015, 44(3): 9-14.

[5] [5] Ueda M, Takabe H. The formation behavior of corrosion protective films of low Cr bearing steels in CO2 environments［J］. Annals of Surgery, 2001, 244(5): 700-705.

[6] [6] Xu L N, Wang B, Zhu J Y, et al. Effect of Cr content on the corrosion performance of low-Cr alloy steel in a CO2 environment［J］. Applied Surface Science, 2016, 379: 39-46.

[7] [7] Zhang L X, Luo F H, Li G P, et al. Influence of pre-diffusion treatment of Cr-Fe powders on the microstructure and properties of iron-based alloys［J］. Powder Metallurgy Technology, 2013, 31(2): 101-107.

[8] [8] Chen H, Zhang Z J, Guo M N, et al. Influence of chromium on sintering properties of FeNiMo system powder metallurgy［J］. Heat Treatment of Metals, 2006(s1): 91-94.

[9] [9] Shi K H, Zhou K C, Li Z Y, et al. Effect of additive amount of Cr on microstructure and properties of WC-9Ni cemented carbides［J］. Rare Metal Materials and Engineering, 2016, 45(12): 3149-3154.

[10] [10] Lewenhagen J. Chromium steel powders for components［J］. Materials Science Forum, 2003, 416/417/418(1): 241-246.

[11] [11] Zhou X, Liu W. Melting and solidifying behavior in single layer selective laser of pure tungsten powder［J］. Chinese Journal of Lasers, 2016,43(5): 0503006.

[12] [12] Zhang G Q, Yang Y Q, Zhang Z M, et al. Optimal design of support structures in selective laser melting of parts［J］. Chinese Journal of Lasers, 2016, 43(12): 1202002.

[13] [13] Lin H, Yang Y Q, Zhang G Q, et al. Tribological performance of medical CoCrMo alloy fabricated by selective laser melting［J］. Acta Optica Sinica, 2016, 36(11): 1114003.

[14] [14] Wen S F, Ji X T, Zhou Y, et al. Development status and prospect of selective laser melting of mould steels［J］. Laser & Optoelectronics Progress, 2018, 55(1): 011404.

[15] [15] Chen H Y, Gu D D, Gu R H, et al. Microstructure evolution and mechanical properties of 5CrNi4Mo die steel parts by selective laser melting additive manufacturing［J］. Chinese Journal of Lasers, 2016, 43(2): 0203003.

[16] [16] Yang Y Q, Wang D, Wu W H. Research progress of direct manufacturing of metal parts by selective laser melting［J］. Chinese Journal of Lasers, 2011, 38(6): 0601007.

[17] [17] Horvath J, Uhlig H H. Critical potentials for pitting corrosion of Ni, Cr-Ni, Cr-Fe, and related stainless steels［J］. Journal of the Electrochemical Society, 1968,115(8): 791-795.

[18] [18] Wang Q, Han C J, Choma T, et al. Effect of Nb content on microstructure, property and in vitro apatite-forming capability of Ti-Nb alloys fabricated via selective laser melting［J］. Materials & Design, 2017, 126: 268-277.

[19] [19] Hubbard C R, Snyder R L. RIR-measurement and use in quantitative XRD［J］. Powder Diffraction, 1988, 3(2): 74-77.

[20] [20] Tan H L, Zhou C, Liu X H, et al. Effect of Cr on corrosion resistance of Q420 steel in atmosphere with high salinity［J］. Journal of Chinese Society for Corrosion and Protection, 2017, 37(3): 267-272.