[1] Cui C, Chen Y L, Fu S C et al[J]. Study on laser multi-channel scanning forming of aluminum alloy cross stiffened panel Defense Manufacturing Technology, 2017, 28-33.

[2] Yang L J, Chen Y L, Wei Y J et al. Experimental investigation of laser induced thermoforming of 5A06 aluminum alloy sheet[J]. Science Technology and Engineering, 16, 18-23(2016).

[3] Gisario A, Barletta M, Venettacci S et al. Progress in tridimensional (3d) laser forming of stainless steel sheets[J]. Lasers in Manufacturing & Materials Processing, 2, 148-163(2015). http://link.springer.com/10.1007/s40516-015-0012-5

[4] Paunoiu V, Squeo E A, Quadrini F et al. Laser bending of stainless steel sheet metals[J]. International Journal of Material Forming, 1, 1371-1374(2008). http://link.springer.com/article/10.1007/s12289-008-0119-8

[5] Liu J, Sun S, Guan Y J. Numerical study on the laser bending of stainless steel foil with pre-stresses[J]. Chinese Journal of Lasers, 35, 1265-1270(2008).

[6] Shi Y J. Research on laser bending mechanism and forming process plan for 3D curved plates[D]. Shanghai: Shanghai Jiaotong University(2007).

[7] Wang X Y, Luo Y H, Wang J et al. Scanning path planning for laser bending of straight tube into coil-shape tube[J]. International Journal of Advanced Manufacturing Technology, 69, 909-917(2013). http://link.springer.com/article/10.1007/s00170-013-5107-6

[8] Kant R, Bhuyan P M, Joshi S N. Experimental studies on curvilinear laser bending of thin sheets[C]. International Conference on Advanced Technologies for Societal Application, 539-548(2016).

[9] Wu D J, Ma G Y, Liu S et al. Experiments and simulation on laser bending of silicon sheet with different thicknesses[J]. Applied Physics A, 101, 517-521(2010). http://link.springer.com/article/10.1007/s00339-010-5889-4

[10] Genna S, Papa I, Leone C. A preliminary study on the characterization of laser-bending process of AISI 304 steel sheets by acoustic emission technique[J]. International Journal of Advanced Manufacturing Technology, 92, 4111-4119(2017). http://link.springer.com/10.1007/s00170-017-0483-y

[11] Lambiase F. Ananalytical model for evaluation of bending angle in laser forming of metal sheets[J]. Journal of Materials Engineering and Performance, 21, 2044-2052(2012). http://link.springer.com/article/10.1007/s11665-012-0163-x

[12] Chen Y L, Yang L J, Fu S C et al. Simulation of laser bending of cross-stiffened integral panel[J]. Chinese Journal of Lasers, 44, 1002004(2017).

[13] Li P, Liu B G, Liu H X. Process model for laser bending shaping of tubes[J]. Laser & Optoelectronics Progress, 54, 081403(2017).

[14] Ding L, Liu H X, Wang H J et al. Experimental study of thin aluminum-lithium alloy sheet metal laser forming with semiconductor laser[J]. Chinese Journal of Lasers, 37, 2143-2148(2010).

[15] Li J H, Su Z C, Yao F P et al. Application of BP neural network in laser bending forming of aluminum alloy sheet[J]. Hot Working Technology, 46, 158-161(2017).

[16] Cheng X Z. Review of laminar composite metal material manufacturing technique[J]. Nonferrous Metal Materials and Engineering, 38, 63-66(2017).

[17] Manesh H D, Shahabi H S. Effective parameters on bonding strength of roll bonded Al/St/Al multilayer strips[J]. Journal of Alloys and Compounds, 476, 292-299(2009). http://www.sciencedirect.com/science/article/pii/S0925838808014205

[18] Edwardson S P, Dearden G, French P et al. Laser forming of metal laminate composites materials[C]. 22nd International Congress on Applications of Lasers & Electro-Optics, 95, 107-116(2003).

[19] Edwardson S P, French P, Dearden G et al. Laser forming of fibre metal laminates[J]. Lasers in Engineering, 15, 233-255(2005). http://www.researchgate.net/publication/255575078_Laser_Forming_of_Fibre_Metal_Laminates

[20] Carey C, Cantwell W J, Dearden G et al. Towards a rapid, non-contact shaping method for fibre metal laminates using a laser source[J]. International Journal of Advanced Manufacturing Technology, 47, 557-565(2010). http://link.springer.com/article/10.1007/s00170-009-2229-y

[21] Shen H, Yao Z Q, Hu J. Numerical analysis of metal/ceramic bilayer materials systems in laser forming[J]. Computational Materials Science, 45, 439-442(2009). http://www.sciencedirect.com/science/article/pii/S0927025608004904

[22] Seyedkashi S M H, Gollo M H, Biao J et al. . Laser bendability of SUS430/C11000/SUS430 laminated composite and its constituent layers[J]. Metals and Materials International, 22, 527-534(2016). http://link.springer.com/article/10.1007/s12540-016-5711-8

[23] Zhang P, Wang X Y. Element diffusion and material properties in transition layer of bending zone in laminated plates[J]. Chinese Journal of Lasers, 43, 0702001(2016).

[24] Yang B B, Wang X Y, Xu W J et al. Experiments on laser bending of stainless steel-carbon steel laminated sheet[J]. Laser & Optoelectronics Progress, 49, 091403(2012).

[25] Ma X P, Wang X Y, Xu W J et al. Heat conduction characteristics of stainless steel-carbon steel laminated sheet bending position[J]. Laser & Optoelectronics Progress, 50, 101401(2013).