[1] 王国栋, 甄新帅, 王延辰. 高加速度条件下的MEMS IMU陀螺仪误差标定方法[J]. 中国惯性技术学报, 31, 523-530(2023).

     WANG G D, ZHEN X SH, WANG Y CH et al. Error calibration method of MEMS IMU gyroscope under high acceleration[J]. Journal of Chinese Inertial Technology, 31, 523-530(2023).

[2] 黎启胜, 许元恒, 罗龙. 科学试验用离心机发展综述[J]. 装备环境工程, 12, 1-10， 87(2015).

     LI Q SH, XU Y H, LUO L. Review on development of centrifuge for scientific tests[J]. Equipment Environmental Engineering, 12, 1-10， 87(2015).

[3] 陈平, 廖微, 张俊秀. 离心机工作台工作半径研究[J]. 宇航计测技术, 44, 64-68(2024).

     CHEN P, LIAO W, ZHANG J X et al. Research on working radius of plate for precision centrifuge[J]. Journal of Astronautic Metrology and Measurement, 44, 64-68(2024).

[4] YANG M, TANG L, ZHANG CH J et al. The status and future of precision centrifuge[J]. Navigation Positioning and Timing, 3, 17-21(2016).

     杨明, 汤莉, 张春京. 精密离心机的现状与未来[J]. 导航定位与授时, 3, 17-21(2016).

[5] ZHANG R, WANG J, ZHOU J K et al. Research on positioning measurement technique of dynamic radius of precision centrifuge[J]. Computer Measurement & Control, 24, 49-51， 55(2016).

     张荣, 王珏, 周继昆. 精密离心机动态半径的定位测量技术研究[J]. 计算机测量与控制, 24, 49-51， 55(2016).

[6] 牛宝良, 宁菲. 精密离心机动态半径的测试与数据分析[J]. 太赫兹科学与电子信息学报, 17, 892(2019).

     NIU B L, NING F. Dynamic radius measurement and data analysis of precision centrifuge[J]. Journal of Terahertz Science and Electronic Information Technology, 17, 892(2019).

[7] ZHOU J K, ZHANG R, ZHANG Y et al. Research and implement on precision centrifuge dynamic radius test[J]. Computer Measurement & Control, 24, 27-29， 33(2016).

     周继昆, 张荣, 张毅. 精密离心机动态半径测试方法研究与实现[J]. 计算机测量与控制, 24, 27-29， 33(2016).

[8] 高超, 周维虎, 高书苑. 基于改进MLS算法的偏振调制激光测距方法实现[J]. 中国激光, 50, 1404003(2023).

     GAO CH, ZHOU W H, GAO SH Y et al. Implementation of polarization modulation laser ranging method based on improved moving least square algorithm[J]. Chinese Journal of Lasers, 50, 1404003(2023).

[9] 赵树华, 王玉冰, 张明时. 调频连续波激光雷达及数据采集信号链噪声分析[J]. 光学 精密工程, 31, 78-88(2023).

     ZHAO SH H, WANG Y B, ZHANG M SH et al. FMCW Lidar and noise analysis of data acquisition signal chain[J]. Opt. Precision Eng., 31, 78-88(2023).

[10] 周思宇, 顾营迎, 杨越棠. 双光梳测距技术的空间应用与试验设计[J]. 中国空间科学技术, 44, 127-135(2024).

     ZHOU S Y, GU Y Y, YANG Y T et al. Space application and test design of dual-comb ranging technique[J]. Chinese Space Science and Technology, 44, 127-135(2024).

[11] JANG Y S, KIM S W. Distance measurements using mode-locked lasers： a review[J]. Nanomanufacturing and Metrology, 1, 131-147(2018).

[12] FORTIER T, BAUMANN E. 20 years of developments in optical frequency comb technology and applications[J]. Communications Physics, 2, 153(2019).

[13] WU G H, ZHOU S Y, YANG Y T et al. Dual-comb ranging and its applications[J]. Chinese Journal of Lasers, 48, 1504002(2021).

     吴冠豪, 周思宇, 杨越棠. 双光梳测距及其应用[J]. 中国激光, 48, 1504002(2021).

[14] ZHAI Y M, JIA L H, QU X H et al. Dual-comb parallel sampling absolute distance measurements with an extended non-ambiguity range[J]. Measurement Science and Technology, 35, 115023(2024).

[15] YU H Y, MA Q Y, LI Y et al. Self-calibrated free-running dual-comb ranging using subsampled repetition frequency information[J]. Optics & Laser Technology, 160, 109023(2023).

[16] LIU Y, LI J SH, HE M ZH et al. Progress in dual-comb absolute ranging methods for large-scale metrology[J]. Metrology Science and Technology, 67, 18-27(2023).

     刘洋, 李建双, 赫明钊. 大尺寸计量中双光梳绝对测距方法的研究进展[J]. 计量科学与技术, 67, 18-27(2023).

[17] YANG Y, QIAN S, ZHOU S et al. High-precision short-distance dual-comb ranging system without carrier-envelope-offset locking[J]. Opt Express, 32, 33196-33207(2024).