[1] [1] JI Zh J, WU X N,YIN Y, et al. Tunable optical filters based on high birefringence fiber loop mirrors[J]. Laser Technology, 2014, 38(1):54-57(in Chinese).

[2] [2] JIANG Y, LIANG D K, ZENG J, et al. Influence of monitoring point wavelength on axial strain sensitivity of high-birefringence fiber loop mirror[J]. Acta Physica Sinica, 2013, 62(6):064216(in Chin-ese).

[3] [3] SUN G Y, TANG H J, HU Y H, et al. Strain and temperature discrimination using high birefringence fiber Sagnac interferometer with enhanced sensitivities[J]. IEEE Photonics Technology Letters, 2012, 24(7):587-589.

[4] [4] JIANG Y, LIANG D K, LU J Y. Voltage demodulation and vibration monitoring based on a polarization maintaining fiber loop mirror[J]. Journal of Intelligent Material Systems and Structures, 2017, 28(13):1832-1838.

[5] [5] LEANDRO D, LOPEZ-AMO M. All-PM fiber loop mirror interfero-meter analysis and simultaneous measurement of temperature and mechanical vibration[J]. Journal of Lightwave Technology, 2018, 36(4):1105-1111.

[6] [6] JIANG Y, ZENG J, LIANG D K, et al. The influences of polarization-maintaining fiber length and sensing length on axial strain sensitivity of polarization-maintaining fiber loop mirror[J]. Journal of Intelligent Material Systems and Structures, 2014,25(15):1959-6194.

[7] [7] ZU P, CHAN C C, JIN Y X, et al. A Temperature-insensitive twist sensor by using low-birefringence photonic-crystal-fiber-based Sagnac interferometer[J]. IEEE Photonics Technology Letters, 2011, 23(13): 920-922.

[8] [8] SILVA R M, FERREIRA M S, FRAZO O. Temperature independent torsion sensor using a high-birefringent Sagnac loop interferometer[J]. Optics Communications, 2012, 285(6): 1167-1170.

[9] [9] THAKUR H V, NALAWADE S M, SAXENA Y, et al. All-fiber embedded PM-PCF vibration sensor for structural health monitoring of composite[J]. Sensors and Actuators: Physical, 2011, A167(2): 204-2012.

[10] [10] QIAN W W, ZHAO C L, DONG X Y. Intensity measurement based temperature-independent strain sensor using a highly birefringent photonic crystal fiber loop mirror[J].Optics Communications, 2010, 283(24): 5250-52544.

[11] [11] JIANG Y, YU M J. Influence of birefringence fibre length on demodulation sensitivity based on a fibre loop mirror sensor[J]. IET Optoelectronics, 2018, 12(5): 254-257.

[12] [12] NOH T K, RYU U C, LEE Y W. Compact and wide range polarimetric strain sensor based on polarization-maintaining photonic crystal fiber[J]. Sensors and Actuators: Physical, 2014, A213(7): 89-93.

[13] [13] WU C, TSE M L V, LIU Z, et al. In-line microfluidic refractometer based on C-shaped fiber assisted photonic crystal fiber Sagnac interferometer[J]. Optics Letters, 2013, 38(17): 3283-3286.

[14] [14] GONG H P, SONG H F, ZHANG S L. Curvature sensor based on hollow-core photonic crystal fiber Sagnac interferometer[J]. IEEE Sensors Journal, 2014, 14(3): 777-779.

[15] [15] JIANG Y, ZHANG Ch Zh, LIANG D K, et al. Optimal research on the strain sensitivity of polarization maintaining fiber loop mirror[J]. Spectroscopy and Spectral Analysis, 2017, 37(5): 1576-1580(in Chinese).

[16] [16] ZHANG Y N, PENG H, ZHOU T, et al. Hydrogen sensor based on high-birefringence fiber loop mirror with sol-gel Pd/WO3 coating[J]. Sensors and Actuators: Chemical, 2017, B248:71-76.

[17] [17] WANG J, LIANG H, DONG X, et al. A temperature-insensitive relative humidity sensor by using polarization maintaining fiber-based Sagnac interferometer[J]. Microwave & Optical Technology Letters, 2013, 55(10):2305-2307.

[18] [18] ZHAO Ch L, WANG Zh, ZHANG Sh, et al. Phenomenon in an alcohol not full-filled temperature sensor based on an optical fiber Sagnac interferometer[J]. Optics Letters, 2012, 37(22):4789-4791.

[19] [19] ZHANG J, QIAO X, GUO T, et al. Highly-sensitive temperature sensor using a Hi-Bi fiber tip probe[J]. IEEE Sensors Journal, 2012, 12(6):2077-2080.

[20] [20] JIANG Y, LIANG D K, ZENG J, et al. Research on axial strain sensitivity of high-birefringence fiber loop mirrorr[J]. Spectroscopy and Spectral Analysis, 2012, 32(12): 3367-3371(in Chinese).