[1] Zhen G Y, Shang F G[M]. Electrical grounding technique, 22-28(2013).

[2] Zhang L J, Ning J, Zhang X J et al. Single pass hybrid laser-MIG welding of 4-mm thick copper without preheating[J]. Materials & Design, 74, 1-18(2015).

[3] Shi Y, Gao H M, Li G et al. High frequency induction brazing process of copper-steel and its effects on microstructure and electrical conductivity of weld joint[J]. Materials Review, 32, 909-914(2018).

[4] Zhao H B[J]. Discussion on welding technology of copper and steel with different materials China Metal Bulletin, 2018, 75-77.

[5] Shi J. Fusion welding on copper-steel dissimilar materials and joint microstructure evolution Xi'an: Xi'an University of[D]. Technology, 10-17(2019).

[6] Meco S, Ganguly S, Williams S et al. Effect of laser processing parameters on the formation of intermetallic compounds in Fe-Al dissimilar welding[J]. Journal of Materials Engineering and Performance, 23, 3361-3370(2014).

[7] Pi Y D, Dong P, Yang W X et al. Laser penetration brazing of brass and low carbon steel[J]. Chinese Journal of Lasers, 34, 1562-1566(2007).

[8] Chen S H, Huang J H, Xia J et al. Influence of processing parameters on the characteristics of stainless steel/copper laser welding[J]. Journal of Materials Processing Technology, 222, 43-51(2015).

[9] Zhang J, Zhang J C, Zhang Q M et al. Experimental study and design of dual-wavelength coaxial hybrid laser welding system[J]. Chinese Journal of Lasers, 44, 0602007(2017).

[10] Fu Y H, Liu Q X, Ye Y X et al. Research on laser surface micro texturing processing of single pulse intervals[J]. Chinese Journal of Lasers, 42, 1203005(2015).

[11] Zhang W Z. Research on laser welding 304 austenitic stainless steel sheet[D]. Dalian: Dalian University of Technology, 15-16(2009).

[12] Zhou J Z, Zhong H, Huang S et al. Surface micro-dimple effect and electrochemical corrosion behaviors of AZ31B magnesium alloy treated by laser[J]. Chinese Journal of Lasers, 42, 0303007(2015).

[13] Fasasi A Y, Mwenifumbo S, Rahbar N et al. Nano-second UV laser processed micro-grooves on Ti6Al4V for biomedical applications[J]. Materials Science and Engineering C, 29, 5-13(2009).

[14] Zhang J, Lin S J, Su S X et al. Effect of defocusing amount on weld shaping in fiber laser welding of aluminum alloy[J]. Laser & Optoelectronics Progress, 53, 121405(2016).

[15] Shu L S, Wang J S. Effect of defocusing distance on microstructure and properties of laser welded joint of 1Cr17Ni2 stainless steel plate[J]. Laser & Optoelectronics Progress, 57, 011401(2020).

[16] Cheng D H, Shao J H, Chen Y P et al. Plasma arc welding of copper-steel dissimilar metals[J]. Transactions of the China Welding Institution, 33, 97-100(2012).

[17] Xu S, Yang L J, Xu S F et al. Relation between plasma electrical signal oscillation and weld depth in laser deep penetration welding[J]. Chinese Journal of Lasers, 47, 0102006(2020).

[18] Wang T G, Tang X H, Han X X et al. Factors influencing weld formation for laser welding of 5083 aluminum alloy in vacuum[J]. Chinese Journal of Lasers, 45, 1102001(2018).

[19] Peng C, Cheng D H, Chen Y P et al. Microstructure of dissimilar material joint with T2 copper and steel 304 for plasma arc welding[J]. Materials Science and Technology, 23, 105-110(2015).