[1] Lin J, Zhang B Y, Zhang D Y et al. Research status and prospect of fault diagnosis for gas turbine aeroengine[J]. Acta Aeronautica et Astronautica Sinica, 43, 626565(2022).

[2] Zhou Y C, Yang L, Liu Z Y et al. Research progress on insulation performance of thermal barrier coatings on turbine blade[J]. Materials China, 39, 707-722, 738(2020).

[3] Yan W L, Yang L, Zhou Y C et al. Research progress of service environment simulation test methods for thermal barrier coatings[J]. Aeronautical Manufacturing Technology, 66, 38-45(2023).

[4] Zhao Y T, Zhang S T, Jiang T et al. Research status of atmospheric plasma spraying YSZ thermal barrier coating internal stress[J]. Aeronautical Manufacturing Technology, 65, 24-32(2022).

[5] Li W Q, Zhou H X, Su H R et al. Progress of research on CMAS corrosion resistance of thermal barrier coatings[J]. Materials Reports, 37, 147-154(2023).

[6] Li G H, Ba D C, Ni Y S et al. Effect of bonding layer roughness on thermal shock performance of YSZ coating[J]. Surface Technology, 50, 310-317, 336(2021).

[7] Xu Y F, Shao J Z, Lin Y et al. Research progress in laser surface polishing of hard and brittle materials[J]. Laser Optoelectronics Progress, 59, 1300003(2022).

[8] Wang D, Fan F, Liu M C et al. Top-hat and Gaussian laser beam smoothing of ground fused silica surface[J]. Optics Laser Technology, 127, 106141(2020).

[9] Chen L, Zhang X Z. Modification the surface quality and mechanical properties by laser polishing of Al/PLA part manufactured by fused deposition modeling[J]. Applied Surface Science, 492, 765-775(2019).

[10] Liu H G, Xie L R, Lin W X et al. Optical quality laser polishing of CVD diamond by UV pulsed laser irradiation[J]. Advanced Optical Materials, 9, 2100537(2021).

[11] Zhang X M, Ji L F, Zhang L T et al. Polishing of alumina ceramic to submicrometer surface roughness by picosecond laser[J]. Surface and Coatings Technology, 397, 125962(2020).

[12] Huo K, Qian W, Cai J et al. The hot corrosion resistance of APS YSZ coatings micro glazed via an ultraviolet picosecond ultrashort pulsed laser[J]. Corrosion Science, 222, 111435(2023).

[13] Wang C W, Kurokawa S, Doi T et al. The polishing effect of SiC substrates in femtosecond laser irradiation assisted chemical mechanical polishing (CMP)[J]. ECS Journal of Solid State Science and Technology, 6, P105-P112(2017).

[14] Zheng Q Z, Cui J L, Fan Z J et al. Investigation on the underwater femtosecond laser polishing SiC ceramic[J]. Ferroelectrics, 564, 28-36(2020).

[15] Long Y, Chen X, Jiang J Y et al. Research progress of ultrafast laser ceramic polishing and texturing technology[J]. Aeronautical Manufacturing Technology, 65, 50-62, 71(2022).

[16] Li N, Fan P X, Zhu Q C et al. Femtosecond laser polishing of additively manufactured parts at grazing incidence[J]. Applied Surface Science, 612, 155833(2023).

[17] Lima R S. Perspectives on thermal gradients in porous ZrO2-7–8 wt.% Y2O3 (YSZ) thermal barrier coatings (TBCs) manufactured by air plasma spray (APS)[J]. Coatings, 10, 812(2020).

[18] Liu J H, Lyu Z, Zhou Y W et al. Research progress of advanced ceramic materials for thermal barrier coatings[J]. Surface Technology, 51, 42-52(2022).

[19] Bean G E, Witkin D B, McLouth T D et al. Effect of laser focus shift on surface quality and density of Inconel 718 parts produced via selective laser melting[J]. Additive Manufacturing, 22, 207-215(2018).

[20] Shao Y X, Yang Y, Zhao C C et al. Phase transitions and microstructure evolutions of in situ YSZ-ZrC composite coating under long-time plasma torch ablation[J]. Surface and Coatings Technology, 466, 129636(2023).

[21] Lin Q Y, Fan Z J, Wang W J et al. The effect of spot overlap ratio on femtosecond laser planarization processing of SiC ceramics[J]. Optics Laser Technology, 129, 106270(2020).

[22] Yao J H, Huang J B, Wang G H et al. Pulsed laser polishing mechanism on high roughness surface cut by wire electrical discharge machining[J]. Chinese Journal of Lasers, 48, 1402003(2021).

[23] Fan Z J, Sun X M, Zhuo X S et al. Femtosecond laser polishing yttria-stabilized zirconia coatings for improving molten salts corrosion resistance[J]. Corrosion Science, 184, 109367(2021).

[24] Huang N, Liu J M, Cheng X Y et al. Study on the relationship between porosity and mechanical properties of plasma sprayed YSZ abradable coatings[J]. Thermal Spray Technology, 14, 55-62(2022).

[25] Zhang X H, Chen X X, Chen T et al. Influence of pulse energy and defocus amount on the mechanism and surface characteristics of femtosecond laser polishing of SiC ceramics[J]. Micromachines, 13, 1118(2022).

[26] Wang Y, Darut G, Luo X T et al. Influence of preheating processes on the microstructure of laser glazed YSZ coatings[J]. Ceramics International, 43, 4606-4611(2017).