[1] [1] Zhu Tianzhu. Development of Three Dimensional Printing System Using Piezoelectric Inkjet Technology and Its Experimental Study[D]. Wuhan: Huazhong University of Science and Technology, 2012. 1-11.

[2] [2] Scalfani, V F Josh Sahib. A model for managing 3D printing services in academic libraries[J]. Issues in Science & Technology Librarianship, 2013, 72: 1-8.

[3] [3] Feifei Yan, Yuanyuan Liu, Haying Chen, et al.. A multi-scale controlled tissue engineering scaffold prepared by 3D printing and NFES technology[J]. AIP Advances, 2014, 4(3): 031321.

[4] [4] Sun Daojin, Liu Jichang, Li Qindong. Phase-field method simulation of microstructure evolution at the bottom of melt pool in coaxial laser cladding[J]. Chinese J Lasers, 2013, 40(4): 0403005.

[5] [5] Meng Qingwu, Geng Lin, Zhu Wenhui, et al.. Exothermic reaction pool state analysis in the process of laser cladding[J]. Applied Laser, 2009, 29(4): 282-285.

[6] [6] O B Kovalev, A M Gurin. Multivortex convection of metal in molten pool with dispersed impurityinduced by laser radiation[J]. International Journal of Heat and Mass Transfer, 2014, 68: 269-277.

[7] [7] D Beckmann, D Schnitzler, D Schaefor, et al.. Beam shaping of laser diode radiation by waveguides with arbitrary cladding geometry written with fs-laser radiation[J]. Optics Express, 2011, 19(25): 25418-25425.

[8] [8] Wang Xiao, Xue Guochun, Li Pin, et al.. Investigation on melt pool in transmission laser bonding of silicon and grass[J]. Chinese J Lasers, 2013, 40(6): 0603007.

[9] [9] Zhao Hailing. Numerical Simulation of Temperature Field and Flow Field during Laser Cladding of Molten Pool[D]. Qinhuangdao: Yanshan University, 2013. 19-40.

[10] [10] Chen Jing, Zhang Fengying, Tan Hua, et al.. Alloying mechanics in moving melt pool during laser solid forming from blended elemental powders[J]. Chinese J Lasers, 2010, 37(8): 2154-2159.

[11] [11] Lei Jianbo, Yang Xichen, Chen Juan, et al.. Measurement of surface temperature field distribution in molten pool of laser cladding[J]. Chinese J Lasers, 2008, 35(10): 1605-1608.

[12] [12] Yang Xichen, Li Li, Zhang Ye. Numerical simulation of temperature field of coaxial powder flow in laser cladding[J]. Acta Optica Sinica, 2009, 29(11): 3114-3120.

[13] [13] Tan Hua, Chen Jing, Huang Weidong, et al.. Evolution of molten pool shape in the process of laser rapid forming[J]. Chinese J Lasers, 2007, 34(3): 442-446.

[14] [14] Tan Hua, Zhang Fengying, Huang Weidong, et al.. Numerical simulation of powder feed of laser solid forming[J]. Chinese J Lasers, 2011, 38(10): 1003003.

[15] [15] Li Yuanyuan. Effect of Gas-Powder Flow on Molten Pool Morphology for Coaxial Powder-Feed Laser Cladding[D]. Changsha: Hunan University, 2012. 16-22.

[16] [16] Hu Xiaodong, Yu Chengsong, Yao Jianhua. Review of laser cladding molten pool temperature measurement and control system[J]. Laser & Optoelectronic Progress, 2013, 50(12): 120003.

[17] [17] Hong Lei, Hu Zhaowei, Ma Baoliang. Monitoring plasma light in laser cladding and melting[J]. Chinese J Lasers, 2011, 38(2): 0203006.

[18] [18] Xin Chengyun, Cheng Xiaofang, Zhang Zhongzheng. Radiation temperature measurement method based on spectral response scaling[J]. Spectroscopy and Spectral Analysis, 2012, 32(10): 2735-2738.

[19] [19] Xiaohui Li, Benjamin W Smith, Nicoló Omenetto, et al.. Relative spectral response calibration of a spectrometer system for laser induced breakdown spectroscopy using the argon branching ratio method[J]. Journal of Analytical Atomic Spectrometry, 2014, 29(4): 657-664.