[1] [1] Wang Yaoli, Yu Hua, Shi Hongxin, et al.. Interface behavior of WC coatings on 40 Cr steel by electro-spark deposition[J]. Transactions of Materials and Heat Treatment, 2013, 34(8): 173-176.

[2] [2] Yao Shuang, Liu Hongxi, Zhang Xiaowei, et al.. Microstructure and wear property of TiC particle reinforced composite coatings on H13 steel surface by laser in-situ synthesis[J]. Chinese J Lasers, 2014, 41(10): 1003004.

[3] [3] Honggang Dong, Lianzhen Yu, Hongming Gao, et al.. Microstructure and mechanical properties of friction welds between TiAl alloy and 40 Cr steel rods[J]. Transactions of Nonferrous Metals Society of China, 2014, 24(10): 3126-3133.

[4] [4] Liu Hongxi, Tang Shujun, Cai Chuanxiong, et al.. Microstructure and property of laser in situ preparation of Ni-based alloy composite coating on die steel surface[J]. Chinese J Lasers, 2013, 40(6): 0603002.

[5] [5] Zhou Yefei, Gao Shiyou, Wang Jingjing. Microstructure-property of laser cladding high carbon Fe-based alloy[J]. Chinese J Lasers, 2013, 40(12): 1203001.

[6] [6] He Qian, Su Huali, Liu Hongzhao, et al.. Research on 40 Cr steel for high-speed spinde laser transformation hardenin technics[J]. Chinese J Lasers, 2009, 36(8): 2192-2195.

[7] [7] Kedong Zhang, Jianxin Deng, Youqiang Xing, et al.. Effect of microscale texture on cutting performance of WC/Co-based TiAlN coated tools under different lubrication conditions[J]. Applied Surface Science, 2015, 326(1): 107-118.

[8] [8] Johannes Kümmel, Daniel Braun, Jens Gibmeier, et al.. Study on micro texturing of uncoated cemented carbide cutting tools for wearimprovement and built-up edge stabilisation[J]. Journal of Materials Processing Technology, 2015, 215(1): 62-70.

[9] [9] Hongxi Liu, Chuanqi Wang, Xiaowei Zhang. Corrosion and wear behavior of Ni60CuMoW coatings fabricated by combination of laser cladding and mechanical vibration[J]. Journal of Alloys and Compounds, 2015, 621(1): 357-363.

[10] [10] Anqi Wu, Qibin Liu, Shuijie Qin. Influence of yttrium on laser surface alloying organization of 40 Cr steel[J]. Journal of Rare Earths, 2011, 29(10): 1004-1008.

[11] [11] Ting Wang, Dongpo Wang, Gang Liu, et al.. Investigations on the nanocrystallization of 40Cr using ultrasonic surface rolling processing [J]. Applied Surface Science, 2008, 255(5): 1824-1829.

[12] [12] Pei Yan, Jianxin Deng, Ze Wu, et al.. Friction and wear behavior of the PVD (Zr,Ti)N coated cemented carbide against 40Cr hardened steel [J]. International Journal of Refractory Metals and Hard Materials, 2012, 35(11): 213-220.

[13] [13] Hui Zhang, Yong Zou, Zengda Zou. Effects of CeO2 on microstructure and corrosion resistance of TiC-VC reinforced Fe-based laser cladding layers[J]. Journal of Rare Earths, 2014, 32(11): 1095-1100.

[14] [14] J H Yao, Q L Zhang, F Z Kong. Laser remanufacturing to improve the erosion and corrosion resistance of metal components[J]. Laser Surface Modification of Alloys for Corrosion and Erosion Resistance, 2012: 320-354.

[15] [15] Qinying Wang, Yangfei Zhang, Shulin Bai, et al.. Microstructures, mechanical properties and corrosion resistance of Hastelloy C22 coating produced by laser cladding[J]. Journal of Alloys and Compounds, 2013, 553 (3): 253-258.

[16] [16] Qingtang Li, Yongping Lei, Hanguang Fu. Laser cladding in-situ NbC particle reinforced Fe-based composite coatings with rare earth oxide addition[J]. Surface and Coatings Technology, 2014, 239(1): 102-107.

[17] [17] Wang Chuanqi, Liu Hongxi, Zhou Rong, et al.. Characteristic behaviors of particle phases in NiCrBSi-TiC composite coating by laser cladding assisted by mechanical vibration[J]. Acta Metallurgy Sinica, 2013, 49(2): 221-228 .

[18] [18] Zhang Guofu, Song Tianmin, Yin Chengjiang, et al.. The effect of mechanical vibration welding on the microstructure of weld and HAZ [J]. Transactions of The China Welding Institution, 2001, 22(3): 85-88.

[19] [19] Yoshiaki Morisada, Hidetoshi Fujii, Tadashi Mizuno, et al.. Fabrication of nanostructured tool steel layer by combination of laser cladding and friction stir processing[J]. Surface and Coatings Technology, 2011, 205(11): 3397-3403.

[20] [20] Soundarapandian Santhanakrishnan, Fanrong Kong, Radovan Kovacevic. An experimentally based thermo-kinetic hardening model for high power direct diode laser cladding[J]. Journal of Materials Processing Technology, 2011, 211(7): 1247-1259.

[21] [21] J Leunda, C Soriano, C Sanz, et al.. Laser cladding of vanadium-carbide tool steels for die repair[J]. Physics Procedia, 2011, 12A: 345- 352.

[22] [22] Matej Pleterski, Tadej Muhic?, Bojan Podgornik, et al.. Blanking punch life improvement by laser cladding[J]. Engineering Failure Analysis, 2011, 18(6): 1527-1537.

[23] [23] Shengfeng Zhou, Xiaoyan Zeng, Qianwu Hu, et al.. Analysis of crack behavior for Ni-based WC composite coatings by laser cladding and crack-free realization[J]. Applied Surface Science, 2008, 255(5): 1646-1653.