[1] [1] MOHAMMAD S J M, RAHGOSHAY S M, RAHIMI-ESBO M, et al. Numerical investigation of the influence of different cooling flow channels on the thermal and water saturation distribution in a real dimensional polymer electrolyte membrane fuel cell［J］. International Journal of Hydrogen Energy, 2023, 48（7）: 2762–2787.

[3] [3] BAEK S M, YU S H, NAM J H, et al. A numerical study on uniform cooling of large-scale PEMFCs with different coolant flow field designs［J］. Applied Thermal Engineering, 2011, 31（8/9）: 1427–1434.

[4] [4] MAHDAVI A, RANJBAR A A, GORJI M, et al. Numerical simulation based design for an innovative PEMFC cooling flow field with metallic bipolar plates［J］. Applied Energy, 2018, 228: 656–666.

[5] [5] WANG Q Q, LI B, YANG D J, et al. Research progress of heat transfer inside proton exchange membrane fuel cells［J/OL］. Journal of Power Sources, 2021, 492: 229613（2021-02-26）［2024-08-22］. DOI: 10.1016/j.jpowsour.2021.229613.

[7] [7] MADHESWARAN D K, VENGATESAN S, VARUVEL E G, et al. Nanofluids as a coolant for polymer electrolyte membrane fuel cells: recent trends, challenges, and future perspectives［J/OL］. Journal of Cleaner Production, 2023, 424: 138763（2023-09-12）［2024-08-22］. DOI: 10.1016/j.jclepro.2023.138763.

[8] [8] ZARIZI M A N, ZAKARIA I A, JOHARI M N I, et al. Themo-electrical behavior of Al2O3 and SiO2 nanofluids in a proton-exchange membrane fuel cell（PEMFC）cooling channel［J］. Pertanika Journal of Science & Technology, 2022, 30（2）: 1381–1396.

[9] [9] ZAKARIA I, AZMI W H, MAMAT A M I, et al. Thermal analysis of Al2O3–water ethylene glycol mixture nanofluid for single PEM fuel cell cooling plate: an experimental study［J］. International Journal of Hydrogen Energy, 2016, 41（9）: 5096–5112.

[10] [10] ZAKARIA I, MOHAMED W, MAMAT A M I B, et al. Thermal analysis of heat transfer enhancement and fluid flow for low concentration of Al2O3 water-ethylene glycol mixture nanofluid in a single PEMFC cooling plate［J］. Energy Procedia, 2015, 79: 259–264.

[11] [11] ZHANG Y, HE S R, JIANG X H, et al. Characteristics of proton exchange membrane fuel cell considering “dot matrix” gas distribution zones and waveform staggered flow field with cooling channels［J/OL］. Energy Conversion and Management, 2022, 267: 115881（2022-06-18）［2024-08-22］. DOI: 10.1016/j.enconman.2022.116483.

[12] [12] ATYABI S A, AFSHARI E. Three-dimensional multiphase model of proton exchange membrane fuel cell with honeycomb flow field at the cathode side［J］. Journal of Cleaner Production, 2019, 214: 738–748.

[13] [13] LIU H J, ZHANG G D, LI D, et al. Three-dimensional multi-phase simulation of cooling patterns for proton exchange membrane fuel cell based on a modified Bruggeman equation［J/OL］. Applied Thermal Engineering, 2020, 174: 115313（2020-04-13）［2024-08-22］. DOI: 10.1016/j.applthermaleng.2020.115313.

[14] [14] ZHANG S Y, QU Z G, XU H T, et al. A numerical study on the performance of PEMFC with wedge-shaped fins in the cathode channel［J］. International Journal of Hydrogen Energy, 2021, 46（54）: 27700–27708.

[15] [15] CHEN B, DENG Q H, YANG G H, et al. Numerical study on heat transfer characteristics and performance evaluation of PEMFC based on multiphase electrochemical model coupled with cooling channel［J/OL］. Energy, 2023, 285: 128933（2023-08-29）［2024-08-22］. DOI: 10.1016/j.energy.2023.128933.

[16] [16] ZHOU Y, CHEN B, MENG K, et al. Optimal design of a cathode flow field for performance enhancement of PEM fuel cell［J/OL］. Applied Energy, 2023, 343: 121226（2023-05-09）［2024-08-22］. DOI: 10.1016/j.apenergy.2023.121226.

[17] [17] MIN C H, GAO X M, LI F, et al. Thermal performance analyses of pulsating heat pipe for application in proton exchange member fuel cell［J/OL］. Energy Conversion and Management, 2022, 259: 115566（2022-04-07）［2024-08-22］. DOI: 10.1016/j.enconman.2022.115566.

[18] [18] ALVES L O F T, HENRQUEZ J R, DA COSTA J P, et al. Comparative performance analysis of internal combustion engine water jacket coolant using a mix of Al2O3 and CuO-based nanofluid and ethylene glycol［J/OL］. Energy, 2022, 250: 123832（2022-03-26）［2024-08-22］. DOI: 10.1016/j.energy.2022.123832.

[19] [19] KIM K H, LEE K Y, LEE S Y, et al. The effects of relative humidity on the performances of PEMFC MEAs with various Nafion® ionomer contents［J］. International Journal of Hydrogen Energy, 2010, 35（23）: 13104–13110.

[20] [20] ATYABI S A, AFSHARI E, SHAKARAMI N. Three-dimensional multiphase modeling of the performance of an open-cathode PEM fuel cell with additional cooling channels［J/OL］. Energy, 2023, 263: 125507（2022-09-30）［2024-08-22］. DOI: 10.1016/j.energy.2022.125507.

[21] [21] SPRINGER T E, ZAWODZINSKI T A, GOTTESFELD S. Polymer electrolyte fuel cell model［J］. Journal of the Electrochemical Society, 1991, 138（8）: 2334–2342.

[22] [22] MOJICA F, RAHMAN M A, SARKER M, et al. Study of converging-diverging channel induced convective mass transport in a proton exchange membrane fuel cell［J/OL］. Energy Conversion and Management, 2021, 237: 114095（2021-04-16）［2024-08-22］. DOI: 10.1016/j.enconman.2021.114095.