[3] [3] YU Y Q, ZHOU L Ch, CAI Zh B,et al. DD6 single-crystal superalloy with thermal barrier coating in femtosecond laser percussion drilling[J]. Optics & Laser Technology, 2021, 133(1): 106555.

[4] [4] ZHANG F Y, WANG J, WANG X,et al. Experimental study of nickel-based superalloy IN792 with femtosecond laser drilling method[J]. Optics & Laser Technology, 2021, 143(11): 107335.

[5] [5] XIAO Q F, XU Y M, LIU X L,et al. Anisotropic creep behavior of Ni-based single crystal superalloy with film cooling hole drilled by a femtosecond laser along different crystal orientations[J]. Optics and Laser Technology, 2023, 163(8): 109258.

[6] [6] WANG R J, DONG X, WANG K D,et al. Investigation on millijoule femtosecond laser spiral drilling of micro-deep holes in thermal barrier coated alloys[J]. International Journal of Advanced Manufacturing Technology, 2021, 114(3/4): 857-869.

[7] [7] LIU X L, TAO Ch H, LIU Ch J,et al. Investigation of processing method and development of gas holes of engine blade[J]. Materials Review, 2013, 27(21): 117-120.

[8] [8] BOGARD D G, THOLE K A. Gas turbine film cooling[J]. Journal of Propulsion and Power, 2006, 22(2): 249-270.

[9] [9] GUO Z, SONG Z, FAN J,et al. Experimental and analytical investigation on service life of film cooling structure for single crystal turbine blade.[J]. International Journal of Fatigue, 2021, 150(9): 106318.

[10] [10] DU T H, LIANG X Q, YU Y Q,et al. Optimization of femtosecond laser drilling process for DD6 single crystal alloy[J]. Metals, 2023, 13(2): 333.

[11] [11] XIA K B, WANG H X, REN N F,et al. Laser drilling in nickel super-alloy sheets with and without ultrasonic assistance characterized by transient in-process detection with indirect characterization after hole-drilling[J]. Optics and Laser Technology, 2021, 134(1): 106559.

[13] [13] GAUTAM G D, PANDEY A K. Pulsed Nd∶YAG laser beam drilling: A review[J]. Optics & Laser Technology, 2018, 100(3): 183-215.

[14] [14] CHIEN W T, HOU Sh Ch. Investigating the recast layer formed during the laser trepan drilling of Inconel718 using the Taguchi method[J]. The International Journal of Advanced Manufacturing Technology, 2007, 33(3): 308-316.

[16] [16] FORNAROLI C, HOLTKAMP J, GILLNER A. Laser-beam helical drilling of high quality micro holes[J]. Physics Procedia, 2013, 41(3): 661-669.

[17] [17] HE C, BUHRING J, GILLNER A. Helical drilling of three-dimensional conical converging-diverging nozzle in steel using ultrashort laser pulses[J]. Procedia CIRP, 2018, 74(8): 305-309.

[18] [18] EBRAHIMZADE V, UCHTMANN H, SINGHEISER L,et al. Microstructure and cyclic oxidation behavior of APS TBC systems drilled with various laser methods.[J]. Surface & Coatings Technology, 2019, 378(1): 125018.

[19] [19] WANG X H, CHEN H, LI Zh Y,et al. Helical drilling of carbon fiber reinforced polymer by a femtosecond laser[J]. Applied Optics, 2022, 61(1): 302-307.

[21] [21] WU X, LEUNG D Y C. Optimization of biodiesel production from camelina oil using orthogonal experiment[J]. Applied Energy, 2011, 88(11): 3615-3624.