[1] [1] DONG L, DONG H J, FUJITA T, et al. Cost-effectiveness analysis of China’s sulfur dioxide control strategy at the regional level: regional disparity, inequity and future challenges[J]. Journal of Cleaner Production, 2015, 90: 345-359.

[2] [2] YU X, QU H. Wind power in China： opportunity goes with challenge[J]. Renewable and Sustainable Energy Reviews, 2010, 14(8): 2232-2237.

[3] [3] ZHAO X, MA X W, CHEN B Y, et al. Challenges toward carbon neutrality in China: strategies and countermeasures[J]. Resources, Conservation and Recycling, 2022, 176: 105959.

[4] [4] MALLAPATY S. How China could be carbon neutral by mid-century[J]. Nature, 2020, 586(7830): 482-483.

[5] [5] LIU L B, WANG Y, WANG Z, et al. Potential contributions of wind and solar power to China’s carbon neutrality[J]. Resources, Conservation and Recycling, 2022, 180: 106155.

[7] [7] ZHEN T, ZHAO P X, ZHANG X, et al. The effect of GFRP powder on the high and low-temperature properties of asphalt mastic[J]. Materials, 2023, 16(7): 2662.

[8] [8] RUAN Z W, LU X, YIN Z H, et al. Spatiotemporal carbon footprint and associated costs of wind power toward China’s carbon neutrality[J]. Resources, Conservation and Recycling, 2024, 205: 107593.

[10] [10] XU Y, WANG F, LIANG D H, et al. A comprehensive review of waste wind turbine blades in China: current status and resource utilization[J]. Journal of Environmental Chemical Engineering, 2024, 12(3): 113077.

[11] [11] LIU P, BARLOW C Y. The environmental impact of wind turbine blades[J]. IOP Conference Series: Materials Science and Engineering, 2016, 139: 012032.

[12] [12] CHEN Y S, CAI G T, BAI R X, et al. Spatiotemporally explicit pathway and material-energy-emission nexus of offshore wind energy development in China up to the year 2060[J]. Resources, Conservation and Recycling, 2022, 183: 106349.

[13] [13] ZHANG W W, YU H, YIN B B, et al. Sustainable transformation of end-of-life wind turbine blades: advancing clean energy solutions in civil engineering through recycling and upcycling[J]. Journal of Cleaner Production, 2023, 426: 139184.

[14] [14] CHEN Y S, CAI G T, ZHENG L X, et al. Modeling waste generation and end-of-life management of wind power development in Guangdong, China until 2050[J]. Resources, Conservation and Recycling, 2021, 169: 105533.

[15] [15] RUANE K, SOUTSOS M, HUYNH A, et al. Construction and cost analysis of bladebridges made from decommissioned FRP wind turbine blades[J]. Sustainability, 2023, 15(4): 3366.

[16] [16] NAGLE A J, DELANEY E L, BANK L C, et al. A comparative life cycle assessment between landfilling and co-processing of waste from decommissioned Irish wind turbine blades[J]. Journal of Cleaner Production, 2020, 277: 123321.

[17] [17] SORTE S, FIGUEIREDO A, VELA G, et al. Evaluating the feasibility of shredded wind turbine blades for sustainable building components[J]. Journal of Cleaner Production, 2024, 434: 139867.

[18] [18] LIU P, BARLOW C Y. Wind turbine blade waste in 2050[J]. Waste Management, 2017, 62: 229-240.

[19] [19] LICHTENEGGER G, RENTIZELAS A A, TRIVYZA N, et al. Offshore and onshore wind turbine blade waste material forecast at a regional level in Europe until 2050[J]. Waste Management, 2020, 106: 120-131.

[20] [20] COOPERMAN A, EBERLE A, LANTZ E. Wind turbine blade material in the united states: quantities, costs, and end-of-life options[J]. Resources, Conservation and Recycling, 2021, 168: 105439.

[21] [21] HENG H, MENG F R, MCKECHNIE J. Wind turbine blade wastes and the environmental impacts in Canada[J]. Waste Management, 2021, 133: 59-70.

[22] [22] DELANEY E L, MCKINLEY J M, MEGARRY W, et al. An integrated geospatial approach for repurposing wind turbine blades[J]. Resources, Conservation and Recycling, 2021, 170: 105601.

[29] [29] CHEN J J, MAO B J, WU Y F, et al. Green development strategy of offshore wind farm in China guided by life cycle assessment[J]. Resources, Conservation and Recycling, 2023, 188: 106652.

[30] [30] MATTSSON C, ANDR A, JUNTIKKA M, et al. Chemical recycling of end-of-Life wind turbine blades by solvolysis/HTL[J]. IOP Conference Series: Materials Science and Engineering, 2020, 942(1): 012013.

[31] [31] YOUSEF S, EIMONTAS J, STASIULAITIENE I, et al. Recovery of energy and carbon fibre from wind turbine blades waste (carbon fibre/unsaturated polyester resin) using pyrolysis process and its life-cycle assessment[J]. Environmental Research, 2024, 245: 118016.

[32] [32] MULCAHY K R, KILPATRICK A F R, HARPER G D J, et al. Debondable adhesives and their use in recycling[J]. Green Chemistry, 2022, 24(1): 36-61.

[34] [34] PAULSEN E B, ENEVOLDSEN P. A multidisciplinary review of recycling methods for end-of-life wind turbine blades[J]. Energies, 2021, 14(14): 4247.

[36] [36] RATHORE N, PANWAR N L. Environmental impact and waste recycling technologies for modern wind turbines: an overview, waste management & research[J]. Journal for a Sustainable Circular Economy, 2022, 41(4): 744-759.

[37] [37] LIU Y, LIU J, JIANG Z W, et al. Chemical recycling of carbon fibre reinforced epoxy resin composites in subcritical water: synergistic effect of phenol and KOH on the decomposition efficiency[J]. Polymer Degradation and Stability, 2012, 97(3): 214-220.

[38] [38] VIJAY N, RAJKUMARA V, BHATTACHARJEE P. Assessment of composite waste disposal in aerospace industries[J]. Procedia Environmental Sciences, 2016, 35: 563-570.

[39] [39] SHEN M Y, GUO Z H, FENG W T. A study on the characteristics and thermal properties of modified regenerated carbon fiber reinforced thermoplastic composite recycled from waste wind turbine blade spar[J]. Composites Part B: Engineering, 2023, 264: 110878.

[40] [40] JENSEN J P, SKELTON K. Wind turbine blade recycling: experiences, challenges and possibilities in a circular economy[J]. Renewable and Sustainable Energy Reviews, 2018, 97: 165-176.

[41] [41] WANG J J, WANG C H, JI Y C, et al. Mechanical properties and microscopic study of recycled fibre concrete based on wind turbine blades[J]. Materials, 2024, 17(14): 3565.

[42] [42] JANI H K, SINGH KACHHWAHA S, NAGABABU G, et al. A brief review on recycling and reuse of wind turbine blade materials[J]. Materials Today: Proceedings, 2022, 62: 7124-7130.

[44] [44] BATURKIN D, HISSEINE O A, MASMOUDI R, et al. Valorization of recycled FRP materials from wind turbine blades in concrete[J]. Resources, Conservation and Recycling, 2021, 174: 105807.

[45] [45] OLIVEIRA P S, ANTUNES M L P, DA CRUZ N C, et al. Use of waste collected from wind turbine blade production as an eco-friendly ingredient in mortars for civil construction[J]. Journal of Cleaner Production, 2020, 274: 122948.

[47] [47] RODIN H, NASSIRI S, ENGLUND K, et al. Recycled glass fiber reinforced polymer composites incorporated in mortar for improved mechanical performance[J]. Construction and Building Materials, 2018, 187: 738-751.

[48] [48] HAIDER M M, NASSIRI S, ENGLUND K, et al. Exploratory study of flexural performance of mechanically recycled glass fiber reinforced polymer shreds as reinforcement in cement mortar[J]. Transportation Research Record: Journal of the Transportation Research Board, 2021, 2675(10): 1254-1267.

[49] [49] TRENTO D, FALESCHINI F, REVILLA-CUESTA V, et al. Improving the early-age behavior of concrete containing coarse recycled aggregate with raw-crushed wind-turbine blade[J]. Journal of Building Engineering, 2024, 92: 109815.

[50] [50] YAZDANBAKHSH A, BANK L C, RIEDER K A, et al. Concrete with discrete slender elements from mechanically recycled wind turbine blades[J]. Resources, Conservation and Recycling, 2018, 128: 11-21.

[51] [51] YAZDANBAKHSH A, BANK L C, TIAN Y. Mechanical processing of GFRP waste into large-sized pieces for use in concrete[J]. Recycling, 2018, 3(1): 8.

[52] [52] FU B, LIU K C, CHEN J F, et al. Concrete reinforced with macro fibres recycled from waste GFRP[J]. Construction and Building Materials, 2021, 310: 125063.

[53] [53] XU G T, LIU M J, XIANG Y, et al. Valorization of macro fibers recycled from decommissioned turbine blades as discrete reinforcement in concrete[J]. Journal of Cleaner Production, 2022, 379: 134550.

[54] [54] REVILLA-GUESTA V, MANSO-MORATO J, HURTADO-ALONSO N, et al. Mechanical and environmental advantages of the revaluation of raw-crushed wind-turbine blades as a concrete component[J]. Journal of Building Engineering, 2024, 82: 108383.

[55] [55] REVILLA-GUESTA V, SKAF M, ORTEGA-LPEZ V, et al. Raw-crushed wind-turbine blade: waste characterization and suitability for use in concrete production[J]. Resources, Conservation and Recycling, 2023, 198: 107160.

[56] [56] ZHAO T H, SONG P F, DONG G Q, et al. Experimental research and theoretical prediction on mechanical properties for recycled GFRP fiber reinforced concrete[J]. Journal of Building Engineering, 2024, 91: 109643.

[57] [57] ZHOU B Y, ZHANG M, MA G W. An experimental study on 3D printed concrete reinforced with fibers recycled from wind turbine blades[J]. Journal of Building Engineering, 2024, 91: 109578.