[1] Gao C X. Research on pulsed fiber laser and amplifier technology[D], 14-16(2009).

[2] Lu X Q, Chen S H. Ytterbium-doped fiber amplifiers[J]. Chinese Journal of Lasers, 28, 209-214(2001).

[3] Zhong R T, Wang Y T, Huang Z J. The developing status and application of high power laser[J]. Laser Journal, 32, 4-7(2011).

[4] Huang L, Wu H S, Li R X et al. 414  W near-diffraction-limited all-fiberized single-frequency polarization-maintained fiber amplifier[J]. Optics Letters, 42, 1-4(2016).

[5] Magne S, Druetta M, Goure J P et al. An ytterbium-doped monomode fiber laser: amplified spontaneous emission, modeling of the gain and tunability in an external cavity[J]. Journal of Luminescence, 60/61, 647-650(1994).

[6] Jones D C, Scott A M. A model of a fiber amplifier incorporating amplified spontaneous emission[J]. Proceedings of SPIE, 5335, 73-80(2004).

[7] Paschotta R, Nilsson J. Ytterbium-doped fiber amplifiers[J]. IEEE Journal of Quantum Electronics, 33, 1049-1056(1997).

[8] Oron R, Hardy A A. Rayleigh backscattering and amplified spontaneous emission in high-power ytterbium-doped fiber amplifiers[J]. Journal of the Optical Society of America B, 16, 695-701(1999).

[9] Wang Y, Xu C Q, Po H. Analysis of Raman and thermal effects in kilowatt fiber lasers[J]. Optics Communications, 242, 487-502(2004).

[10] Feng J, Zhou X J, Zhang Z Y et al. Inelastic scatterings in high-power back-pumped ytterbium-doped double-clad fiber amplifiers[J]. High Power Laser and Particle Beams, 21, 1148-1152(2009).

[11] Fève J P, Schrader P E, Farrow R L et al. Four-wave mixing in nanosecond pulsed fiber amplifiers[J]. Optics Express, 15, 4647-4662(2007).

[12] Liu A P. Suppressing stimulated Brillouin scattering in fiber amplifiers using nonuniform fiber and temperature gradient[J]. Optics Express, 15, 977-984(2007).

[13] Hildebrandt M, Buesche S, Wessels P et al. Brillouin scattering spectra in high-power single-frequency ytterbium doped fiber amplifiers[J]. Optics Express, 16, 15970-15979(2008).

[14] Li F Y, Li Y, Song H Q et al. The national optical fiber material devices achieve high SRS rejection ratio of 20.88 kW output[J]. Chinese Journal of Lasers, 48, 2116002(2021).

[15] Li F, Zhang C, Dai J Y et al. 4 kW high-beam-quality laser output using homemade 20 μm/400 μm Yb-doped fiber[J]. Chinese Journal of Lasers, 50, 0515002(2023).

[16] Liu G H, Liu D M. Optimization of pumping mode for double-clad fiber lasers[J]. Optics & Laser Technology, 40, 256-260(2008).

[17] Kuznetsov M S, Antipov O L, Fotiadi A A et al. Electronic and thermal refractive index changes in Ytterbium-doped fiber amplifiers[J]. Optics Express, 21, 22374-22388(2013).

[18] Liu W, Kuang W J, Huang L J et al. Modeling of the spectral properties of CW Yb-doped fiber amplifier and experimental validation[J]. Laser Physics Letters, 12, 045104(2015).

[19] Liu W, Kuang W J, Jiang M et al. Modeling of the spectral evolution in a narrow-linewidth fiber amplifier[J]. Laser Physics Letters, 13, 035105(2016).

[20] Liu W, Ma P F, Zhou P et al. Optimization for the fiber laser source through its temporal and spectral characteristics[J]. Proceedings of SPIE, 10436, 104360O(2017).

[21] Lei C M, Jin A J, Song R et al. Theoretical and experimental research of supercontinuum generation in an ytterbium-doped fiber amplifier[J]. Optics Express, 24, 9237-9350(2016).

[22] Su X Y, Xu T J, Zheng Y et al. Modeling of a dual-wavelength fiber amplification system for further mid-infrared generation[J]. Journal of Optics, 24, 065703(2022).

[23] Xu T J, Su X Y. Study of the reabsorption effect on the ytterbium-doped fiber amplifiers[J]. Optics Communications, 533, 129303(2023).

[24] Kurkov A S. Oscillation spectral range of Yb-doped fiber lasers[J]. Laser Physics Letters, 4, 93-102(2007).

[25] Digonnet M J[M]. Rare-earth-doped fiber lasers and amplifiers, revised and expanded(2001).

[26] Becker P C, Olsson N A, Simpson J R[M]. Erbium-doped fiber amplifiers: fundamentals and technology(1999).

[27] Koester C J, Snitzer E. Amplification in a fiber laser[J]. Applied Optics, 3, 1182-1186(1964).

[28] Yao T F, Ji J H, Nilsson J. Ultra-low quantum-defect heating in ytterbium-doped aluminosilicate fibers[J]. Journal of Lightwave Technology, 32, 429-434(2014).

[29] Hajialamdari M, Alkadry A M, Strickland D. Modeling of a two-color, two-stage, ultrafast Yb-doped fiber amplifier[J]. Optics Communications, 284, 2843-2848(2011).