[1] [1] SRIKAR R, GAMBARYAN-ROISMAN T, STEFFES C, et al. Nanofiber coating of surfaces for intensification of drop or spray impact cooling［J］. International Journal of Heat and Mass Transfer, 2009, 52（25/26）: 5814–5826.

[2] [2] BREITENBACH J, ROISMAN I V, TROPEA C. Heat transfer in the film boiling regime: single drop impact and spray cooling［J］. International Journal of Heat and Mass Transfer, 2017, 110: 34–42.

[3] [3] REIS N, AINSLEY C, DERBY B. Ink-jet delivery of particle suspensions by piezoelectric droplet ejectors［J/OL］. Journal of Applied Physics, 2005, 97（9）: 094903（2005-02-21）［2024-06-04］.DOI: 10.1063/1.1888026.

[5] [5] PANAO M R O, MOREIRA A L N. Flow characteristics of spray impingement in PFI injection systems［J］. Experiments in Fluids, 2005, 39: 364–374.

[7] [7] CHEN B L, FENG L, WANG Y, et al. Spray and flame characteristics of wall-impinging diesel fuel spray at different wall temperatures and ambient pressures in a constant volume combustion vessel［J］. Fuel, 2019, 235: 416–425.

[9] [9] CELESTINI F, KIRSTETTER G. Effect of an electric field on a Leidenfrost droplet［J］. Soft Matter, 2012, 8（22）: 5992–5995.

[10] [10] LIANG G T, MUDAWAR I. Review of drop impact on heated walls［J］. International Journal of Heat and Mass Transfer, 2017, 106: 103–126.

[11] [11] SCHELLER B L, BOUSFIELD D W. Newtonian drop impact with a solid surface［J］. AIChE Journal, 1995, 41（6）: 1357–1367.

[12] [12] TRAN T, STAAT H J J, PROSPERETTI A, et al. Drop impact on superheated surfaces［J/OL］. Physical Review Letters, 2012, 108（3）: 036101（2012-01-20）［2024-06-04］.DOI: 10.1103/PhysRevLett.108.036101.

[13] [13] WACHTERS L H J, SMULDERS L, VERMEULEN J R, et al. The heat transfer from a hot wall to impinging mist droplets in the spheroidal state［J］. Chemical Engineering Science, 1966, 21（12）: 1231–1238.

[14] [14] VISSER C W, FROMMHOLD P E, WILDEMAN S, et al. Dynamics of high-speed micro-drop impact: numerical simulations and experiments at frame-to-frame times below 100 ns［J］. Soft Matter, 2015, 11（9）: 1708–1722.

[15] [15] CLANET C, BEGUIN C, RICHARD D, et al. Maximal deformation of an impacting drop［J］. Journal of Fluid Mechanics, 2004, 517: 199–208.

[16] [16] ROISMAN I V. Inertia dominated drop collisions Ⅱ: an analytical solution of the Navier–Stokes equations for a spreading viscous film［J/OL］. Physics of Fluids, 2009, 21（5）: 052104（2009-05-11）［2024-06-04］. DOI: 10.1063/1.3129283.

[17] [17] PALACIOS J, HERNANDEZ J, GOMEZ P, et al. Experimental study of splashing patterns and the splashing/deposition threshold in drop impacts onto dry smooth solid surfaces［J］. Experimental Thermal and Fluid Science, 2013, 44: 571–582.

[18] [18] YANG L, LI Z H, YANG T, et al. On liquid viscosity on droplet splash and receding breakup on a smooth solid surface at atmospheric pressure［EB/OL］.（2021-04-08）［2024-07-02］.DOI: 10.48550/arXiv.2014.03475.

[19] [19] ALMOHAMMADI H, AMIRFAZLI A. Droplet impact: viscosity and wettability effects on splashing［J］. Journal of Colloid and Interface Science, 2019, 553: 22–30.

[20] [20] YAO Y N, LI C, TAO Z X, et al. Experimental and numerical study on the impact and freezing process of a water droplet on a cold surface［J］. Applied Thermal Engineering, 2018, 137: 83–92.

[21] [21] JIN Z Y, ZHANG H H, YANG Z G. Experimental investigation of the impact and freezing processes of a water droplet on an ice surface［J］. International Journal of Heat and Mass Transfer, 2017, 109: 716–724.

[22] [22] BAYER I S, MEGARIDIS C M. Contact angle dynamics in droplets impacting on flat surfaces with different wetting characteristics［J］. Journal of Fluid Mechanics, 2006, 558: 415–449.

[23] [23] WANG L P, KONG W L, WANG F X, et al. Effect of nucleation time on freezing morphology and type of a water droplet impacting onto cold substrate［J］. International Journal of Heat and Mass Transfer, 2019, 130: 831–842.

[24] [24] ZHANG H H, JIN Z Y, JIAO M S, et al. Experimental investigation of the impact and freezing processes of a water droplet on different cold concave surfaces［J］. International Journal of Thermal Sciences, 2018, 132: 498–508.

[25] [25] JIN Z Y, WANG Z N, SUI D Y, et al. The impact and freezing processes of a water droplet on different inclined cold surfaces［J］. International Journal of Heat and Mass Transfer, 2016, 97: 211–223.

[26] [26] HUANG X, TEPYLO N, POMMIER-BUDINGER V, et al. A survey of icephobic coatings and their potential use in a hybrid coating/active ice protection system for aerospace applications［J］. Progress in Aerospace Sciences, 2019, 105: 74–97.

[27] [27] SCHREMB M, BORCHERT S, BERBEROVIC E, et al. Computational modelling of flow and conjugate heat transfer of a drop impacting onto a cold wall［J］. International Journal of Heat and Mass Transfer, 2017, 109: 971–980.

[29] [29] LEI J L, LI J W, LIU Y. Ethanol drop impingement on ultracold surfaces under low-temperature cold-start conditions of engines［J/OL］. Fuel, 2022, 311: 122573（2022-01-04）［2024-06-04］. DOI: 10.1016/j.fuel.2021.122573.

[30] [30] RIOBOO R, MARENGO M, TROPEA C. Time evolution of liquid drop impact onto solid, dry surfaces［J］. Experiments in Fluids, 2002, 33（1）: 112–124.

[31] [31] MONGRUEL A, DARU V, FEUILLEBOIS F, et al. Early post-impact time dynamics of viscous drops onto a solid dry surface［J/OL］. Physics of Fluids, 2009, 21（3）: 032101（2009-03-05）［2024-06-04］. DOI: 10.1063/1.3079095.

[32] [32] SHANG Y H, ZHANG Y H, HOU Y, et al. Effects of surface subcooling on the spreading dynamics of an impact water droplet［J/OL］. Physics of Fluids, 2020, 32（12）: 123309（2020-12-07）［2024-06-04］. DOI: 10.1063/5.0028081.

[33] [33] WILDEMAN S, VISSER C W, SUN C, et al. On the spreading of impacting drops［J］. Journal of Fluid Mechanics, 2016, 805: 636–655.