[1] Dong X N, Gao L M, Shen X J et al. Passing azimuth vertically with the technic of magneto optic modulation[J]. Acta Photonica Sinica, 30, 1389-1391(2001).

[2] Cai W, Zhao Z H, Yang Z Y et al. Non-line-of-sight azimuth transmission technology based on polarization-maintaining fiber[J]. Acta Optica Sinica, 40, 1512001(2020).

[3] Suo X X, Li J, Liu Y Y et al. Development of resonant fiber optic gyroscope based on hybrid photonic crystal fiber resonator[J]. Chinese Journal of Lasers, 46, 1206003(2019).

[4] Wang X Q, Zhang T, Liang L J et al. Testing technique of polarization-coupling distribution of fiber coil and beat length of used fiber[J]. Laser & Optoelectronics Progress, 57, 230602(2020).

[5] Iadicicco A, Ranjan R, Esposito F et al. Arc-induced long period gratings in polarization-maintaining panda fiber[J]. IEEE Photonics Technology Letters, 29, 1533-1536(2017).

[6] Fang S S, Wu X Q, Zhang G et al. High-sensitivity fiber optic temperature and strain sensors based on the vernier effect[J]. Chinese Journal of Lasers, 48, 0106004(2021).

[7] Liu J H, Li R C. Analysis of thermal drift in high performance interferometric fiber-optic gyroscopes[J]. Chinese Optics, 13, 333-343(2020).

[8] Kim Y H, Song K Y. Characterization of nonlinear temperature dependence of Brillouin dynamic grating spectra in polarization-maintaining fibers[J]. Journal of Lightwave Technology, 33, 4922-4927(2015).

[9] Zhang F, Lit J W. Temperature and strain sensitivity measurements of high-birefringent polarization-maintaining fibers[J]. Applied Optics, 32, 2213-2218(1993).

[10] Shiue S T, Tu Y K. Relaxation of thermal stresses in double-coated optical fibers[J]. Journal of Applied Physics, 86, 4085-4090(1999).

[11] Li M J, Li S P, Nolan D A. Nonlinear fibers for signal processing using optical Kerr effects[J]. Journal of Lightwave Technology, 23, 3606-3614(2005).

[12] Ju H, Lee E C, Yang S K et al. Quantum squeezing by optical Kerr effects in nonlinear waveguides[J]. AIP Conference Proceedings, 1399, 991-992(2011).

[13] Magalhães R, Pereira J, Garcia-Ruiz A et al. Distributed detection of quadratic Kerr effect in silica fibers using chirped-pulse φOTDR[J]. Proceedings of SPIE, 11199, 1119929(2019).

[14] Liu J H, Liu Y F, Xu T H. Analytical estimation of stress-induced birefringence in panda-type polarization-maintaining fibers[J]. IEEE Photonics Technology Letters, 32, 1507-1510(2020).

[15] Kaczmarek C. Uncertainty of the Sagnac interferometer-based measurement of the modal birefringence of polarization maintaining optical fibers[J]. Optica Applicata, 42, 875-885(2012).

[16] Chiang K S. Temperature sensitivity of coated stress-induced birefringent optical fibers[J]. Optical Engineering, 36, 999-1007(1997).

[17] Park Y, Paek U C, Kim D Y. Characterization of a stress-applied polarization-maintaining (PM) fiber through photoelastic tomography[J]. Journal of Lightwave Technology, 21, 997(2003).

[18] Zhang Y X. Theoretical study of pressure and temperature detected simultaneously for polarization-maintaining fiber sensor[D]. Xi’an: Xidian University(2008).

[19] Guan R F, Wang X L, Wang X F et al. Finite element analysis on stress-induced birefringence of polarization-maintaining optical fiber[J]. Chinese Optics Letters, 3, 42-45(2005).

[20] Zhu Z W. Optical fiber imported electric field measurement in transformer oil for oil-paper insulation[D]. Beijing: North China Electric Power University(2017).

[21] Yang Z Y, Zhou Z F, Zhang Z L. Influence of Bessel functions expansions on spatial azimuth measurement error[J]. Journal of Applied Optics, 33, 461-465(2012).

[22] Zhu F X, Chen H, Yin J D et al. Radially polarized field fiber based on circularly symmetric radial birefringence[J]. Chinese Journal of Lasers, 47, 0101005(2020).