[7] [7] ZHAI L L, BAN C Y, ZHANG J W. Investigation on laser cladding Ni-base coating assisted by electromagnetic field［J］. Optics & Laser Technology, 2019, 114: 81-88.

[8] [8] ZHAI L L, BAN C Y, ZHANG J W, et al. Characteristics of dilution and microstructure in laser cladding Ni-Cr-B-Si coating assisted by electromagnetic compound field［J］. Materials Letters, 2019, 243: 195-198.

[9] [9] HU G F, YANG Y,SUN R, et al. Microstructure and properties of laser cladding NiCrBSi coating assisted by electromagnetic-ultrasonic compound field［J］. Surface and Coatings Technology, 2020, 404: 126469.

[10] [10] ADEGOKE O, ANDERSSON J, BRODIN H, et al. Influence of laser powder bed fusion process parameters on voids, cracks, andmicrohardness of nickel-based superalloy alloy 247LC［J］. Materials, 2020, 13(17): 3770.

[12] [12] WU Z P, LI T, LI Q, et al. Process optimization of laser cladding Ni60A alloy coating in remanufacturing［J］. Optics & Laser Technology, 2019, 120: 105718.

[15] [15] FENG X L, WANG H F, LIU X C, et al. Effect of Al content on wear and corrosion resistance of Ni-based alloy coatings by laser cladding［J］. Surface and Coatings Technology, 2021, 412: 126976.

[16] [16] LU S S, ZHOU J S, WANG L Q, et al. Effect of V and Cr transition layers on microstructure and mechanical properties of Ni-based coating on titanium alloy fabricated by laser cladding［J］. Surface and Coatings Technology, 2021, 405: 126734.

[17] [17] ZHANG L M, SUN D B, YU H Y. Effect of niobium on the microstructure and wear resistance of iron-based alloy coating produced by plasma cladding［J］. Materials Science and Engineering: A, 2008, 490(1/2): 57-61.

[18] [18] DENG Q L, FU W, FANG H Y. Influence of Ta strengthening on microstructure and wear resistance of laser cladding Ni45 coating［J］. Materials Science Forum, 2017, 893: 323-329.

[26] [26] WANG X, ZHANG L J, NING J, et al. Hierarchical grain refinement during the laser additive manufacturing of Ti-6Al-4V alloys by the addition of micron-sized refractory particles［J］. Additive Manufacturing, 2021, 45: 102045.

[30] [30] WANG K L, ZHANG Q B, SUN M L, et al. Microstructural characteristics of laser clad coatings with rare earth metalelements［J］. Journal of Materials Processing Technology, 2003, 139(1/2/3): 448-452.

[31] [31] WANG C L, GAO Y, WANG R, et al. Microstructure of laser-clad Ni60 cladding layers added with different amounts of rare-earth oxides on 6063 Al alloys［J］. Journal of Alloys and Compounds, 2018, 740: 1099-1107.

[44] [44] ZHANG Z Z, CHEN Y B, ZHANG Y, et al. Tribology characteristics of ex-situ and in situ tungsten carbide particles reinforced iron matrix composites produced by spark plasma sintering［J］. Journal of Alloys and Compounds, 2017, 704: 260-268.

[45] [45] ONUOHA C, JIN C X, FARHAT Z, et al. The effects of TiC grain size and steel binder content on the reciprocating wear behaviour of TiC-316L stainless steel cermets［J］. Wear, 2016, 350-351: 116-129.

[46] [46] WANG C L, GAO Y, ZENG Z C, et al. Effect of rare-earth on friction and wear properties of laser cladding Ni-based coatings on 6063Al［J］. Journal of Alloys and Compounds, 2017, 727: 278-285.

[56] [56] LI M Y, HAN B, WANG Y, et al. Effects of La2O3 on the microstructure and property of laser cladding Ni-based ceramic coating［J］. Optik, 2017, 130: 1032-1037.

[61] [61] SHU D, DAI S C, WANG G, et al.Influence of CeO2 content on WC morphology and mechanical properties of WC/Ni matrix composites coating prepared by laser in situ synthesis method［J］. Journal of Materials Research and Technology, 2020, 9(5): 11111-11120.