[1] [1] Witik R A, Payet J, Michaud V, et al. Assessing the life cycle costs and environmental performance of lightweight materials in automobile applications［J］. Composites: Part A-Applied Science and Manufacturing, 2011, 42(11): 1694-1709.

[2] [2] Huang R, Riddle M, Graziano D J, et al. Energy and emissions saving potential of additive manufacturing: the case of lightweight aircraft components［J］. Journal of Cleaner Production, 2016, 135: 1559-1570.

[3] [3] am G, Mistikoglu S. Recent developments in friction stir welding of Al-alloys［J］. Journal of Materials Engineering and Performance, 2014, 23(6): 1936-1953.

[4] [4] Prabhu T R. An overview of high-performance aircraft structural Al alloy-AA7085［J］. Acta Metallurgica Sinica, 2015, 28(7): 909-921.

[5] [5] Cai Hua, Kong Xiaofang, Xiao Rongshi. Effect of surface status on microstructures and solidification cracking susceptibility in laser beam welding of 2524 aluminum alloy［J］. Chinese J lasers, 2013, 40(2): 0203002.

[6] [6] Chen K, Yang W X, Xiao R S. Direct laser welding of an Al-Li alloy plate without prior surface cleaning［J］. Lasers in Engineering, 2011, 22(5): 361-369.

[7] [7] Wang Zemin, Zeng Xiaoyan, Huang Weiling. Parameters and mechanisms of laser cleaning rubber layer on a tyre mould［J］. Chinese J Lasers, 2000, 27(11): 1050-1054.

[8] [8] Li Wei. Research on mechanisms of laser rust removal and manufacture of laser cleaning devices［D］. Tianjin: Nankai University, 2014.

[9] [9] Arnold N, Schrems G, Muehlberger T, et al. Dynamic particle removal by nanosecond dry laser cleaning: theory［C］. SPIE, 2002, 4426: 340-346.

[10] [10] Buccolieri G, Nassisi V, Buccolieri A, et al. Laser cleaning of a bronze bell［J］. Applied Surface Science, 2013, 272(5): 55-58.

[11] [11] Chen G X, Kwee T J, Tan K P, et al. Laser cleaning of steel for paint removal［J］. Applied Physics A, 2010, 101(2): 249-253.

[12] [12] Wang Z, Zeng X, Huang W. Parameters and surface performance of laser removal of rust layer on A3 steel［J］. Surface & Coatings Technology, 2003, 166(1): 10-16.

[13] [13] Ye Yayun, Qi Yang, Qin Lang, et al. Laser cleaning of contaminations on the surface of stone relics［J］. Chinese J Lasers, 2013, 40(9): 0903005.

[14] [14] Dimogerontakis T, Oltra R, Heintz O. Thermal oxidation induced during laser cleaning of an aluminum-magnesium alloy［J］. Applied Physics A, 2005, 81(6): 1173-1179.

[15] [15] Kumar A, Sapp M, Vincelli J, et al. A study on laser cleaning and pulsed gas tungsten arc welding of Ti-3Al-2.5V alloy tubes［J］. Journal of Materials Processing Technology, 2010, 210(1): 64-71.

[16] [16] Alshaer A W, Li L, Mistry A. The effects of short pulse laser surface cleaning on porosity formation and reduction in laser welding of aluminum alloy for automotive component manufacture［J］. Optics & Laser Technology, 2014, 64(4): 162-171.

[17] [17] Lin J, Cetinkaya C. Potential thermo-mechanical substrate damage in nanoparticle removal with pulsed lasers［J］. Journal of Adhesion Science and Technology, 2003, 17(1): 91-113.

[18] [18] Song Feng, Zou Wanfang, Tian Bin, et al. Model of one-dimensional thermal stress applied in paint removal by Q-switched short pulse laser［J］. Chinese J Lasers, 2007, 34(11): 1577-1581.

[19] [19] Deng Caiqin. Causes of streak defect on 6063 aluminum alloy profile and measures to prevent it［J］. Light Alloy Fabrication Technology, 2002, 30(10): 21-22.

[20] [20] Zhang Yan. Laser cleaning technology and application of metal surface［J］. Ome Information, 2008, 25(8): 22-26.