Researching | Assessing total differences for effective samples having variations in color, coarseness, and glint

Chinese Optics Letters, Volume. 8, Issue 7, 717(2010)

Assessing total differences for effective samples having variations in color, coarseness, and glint

Zhongning Huang^1,2, Haisong Xu¹, M. Ronnier Luo², Guihua Cui², and Huajun Feng¹

Author Affiliations

¹State Key Laboratory of Modern Optical Instrumentation, Zhejiang University, Hangzhou 310027, China

²Department of Color Science, University of Leeds, Leeds LS2 9JT, UK

show less

Abstract Get PDF

References (11)

Paper Information

References(11)

[1] [1] C. S. McCamy, Color Res. Appl. 21, 292 (1996).

[2] [2] C. S. McCamy, Color Res. Appl. 23, 362 (1998).

[3] [3] E. Kirchner, G. J. van den Kieboom, L. Njo, R. Super, and R. Gottenbos, Color Res. Appl. 32, 256 (2007).

[4] [4] S. Kitaguchi, M. R. Luo, S. Westland, E. J. J. Kirchner, and G. J. van den Kieboom, in 14th Color Imaging Conference Final Program and Proceedings 197 (2006).

[5] [5] W. L. Chou, "Evaluation of lightness difference and metallic colour difference", PhD. Thesis (University of Derby, 2003).

[6] [6] S. Kitaguchi, "Modeling texture appearance of gonioapparent objects", PhD. Thesis (University of Leeds, 2008).

[7] [7] P. A. Garca, R. Huertas, M. Melgosa, and G. Cui, J. Opt. Soc. Am. A 24, 1823 (2007).

[8] [8] M. R. Luo, Rev. Prog. Color 32, 28 (2002).

[9] [9] M. R. Luo, G. Cui, and B. Rigg, Color Res. Appl. 26, 340 (2001).

[10] [10] M. Melgosa, R. Huertas, and R. S. Berns, J. Opt. Soc. Am. A 25, 1828 (2008).

[11] [11] J. Ma, H. Xu, M. R. Luo, and G. Cui , Chin. Opt. Lett. 7, 869 (2009).

CLP Journals

[1] Zhongning Huang, Haisong Xu, M. Ronnier Luo, "Camera-based model to predict the total difference between effect coatings under directional illumination," Chin. Opt. Lett. 9, 093301 (2011)

[2] Liang Jing, Liao Ningfang, Song Li, Dong Shuwen, Lian Yusheng, Wu Xiaohui. Establishment and Evaluation of Color Appearance Datasets about Low-Glossiness Color Printing Atlas[J]. Acta Optica Sinica, 2012, 32(5): 533001

Cited By

[1] Sandra Kim, Matt Golding, Richard H. Archer. The Application of Computer Color Matching Techniques to the Matching of Target Colors in a Food Substrate: A First Step in the Development of Foods with Customized Appearance. Journal of Food Science, 77, S216(2012).

[2] Ali Mohammadalizadeh, Farhad Ameri, Siamak Moradian, Fereshteh Mirjalili. Effect of color on some geometric attributes of visual appearance of non-effect coatings. Journal of Coatings Technology and Research, 17, 949(2020).

[3] E. J. J. Kirchner, J. Ravi. Setting tolerances on color and texture for automotive coatings. Color Research & Application, 39, 88(2014).

[4] Ming‐Jiu Huang, Hung‐Shing Chen, Ronnier Luo, Pei‐Li Sun. Assessing appearance and emotional attributes of coloured metallic paints. Coloration Technology, 134, 59(2018).

[5] Khalil Huraibat, Esther Perales, Eric Kirchner, Ivo Van der Lans, Alejandro Ferrero, Joaquín Campos. Accurate physics-based digital reproduction of effect coatings. Optics Express, 29, 34671(2021).

[6] Manuel Melgosa, Alain Trémeau, Guihua Cui. Advanced Color Image Processing and Analysis, 59(2013).

[7] F. Mirjalili, S. Moradian, F. Ameri, M. Amani Tehran. Quantification and prediction of visually perceived specular gloss at three illumination/viewing geometries. Journal of Coatings Technology and Research, 13, 239(2016).

[8] Mengting Wu, Haisong Xu, Zhehong Wang, Haifeng Li. Towards a practical metric of surface gloss for metallic coatings from automotive industry. Journal of Coatings Technology and Research, 13, 469(2016).

[9] Jing Liang, Yu Tong Piao, Ning Fang Liao. Establishment and Evaluation of Color Appearance Datasets about Packaging and Printing Atlas of High Gloss. Applied Mechanics and Materials, 469, 269(2013).

[10] Ye Seul Baek, Youngshin Kwak, Seungjoon Yang. Visual appearance measurement of surfaces containing pearl flakes. Journal of the Optical Society of America A, 32, 934(2015).

[11] Ali Mohammadalizadeh, Farhad Ameri, Siamak Moradian, Manuel Melgosa, Fereshteh Mirjalili. Modelling the orange-peel texture for chromatic and achromatic samples. Progress in Organic Coatings, 135, 148(2019).

[12] Ji?í Filip, Radomír Vávra, Martina Kolafová, Frank J. Maile. Assessment of sparkle and graininess in effect coatings using a high-resolution gonioreflectometer and psychophysical studies. Journal of Coatings Technology and Research, 18, 1511(2021).

[13] Manuel Melgosa, Juan Martínez-García, Luis Gómez-Robledo, Esther Perales, Francisco M. Martínez-Verdú, Thomas Dauser. Measuring color differences in automotive samples with lightness flop: A test of the AUDI2000 color-difference formula. Optics Express, 22, 3458(2014).

[14] Jiri Filip, Martina Kolafova, Radomir Vavra. Perceived Effects of Static and Dynamic Sparkle in Captured Effect Coatings. 2019 15th International Conference on Signal-Image Technology & Internet-Based Systems (SITIS), 732(2019).

[15] F. Mirjalili, S. Moradian, F. Ameri. A new approach to investigate relationships between certain instrumentally measured appearance parameters and their visually perceived equivalents in the automotive industry. Journal of Coatings Technology and Research, 11, 341(2014).

[16] José M. Medina, José A. Díaz, Carlos Vignolo. Fractal Dimension of Sparkles in Automotive Metallic Coatings by Multispectral Imaging Measurements. ACS Applied Materials & Interfaces, 6, 11439(2014).

[17] Eric Kirchner. Encyclopedia of Color Science and Technology, 1(2022).

[18] Eric Kirchner, Niels Dekker. Performance measures of color-difference equations: correlation coefficient versus standardized residual sum of squares. Journal of the Optical Society of America A, 28, 1841(2011).

[19] Shuwen Dong, Ningfang Liao, Li Song, Jing Liang, Kai Lin. Testing the performance of CIECAM02 model using two distinct glossinesses of color printing atlas. Journal of the Optical Society of America A, 31, A263(2014).

[20] Manuel Melgosa, Pedro A. García, Luis Gómez-Robledo, Renzo Shamey, David Hinks, Guihua Cui, M. Ronnier Luo. Notes on the application of the standardized residual sum of squares index for the assessment of intra- and inter-observer variability in color-difference experiments. Journal of the Optical Society of America A, 28, 949(2011).

[21] F. Mirjalili, S. Moradian, F. Ameri. Derivation of an instrumentally based geometric appearance index for the automotive industry. Journal of Coatings Technology and Research, 11, 853(2014).

[22] Manuel Melgosa, Guihua Cui, Claudio Oleari, Pedro J. Pardo, Min Huang, Changjun Li, Ming Ronnier Luo. Revisiting the weighting function for lightness in the CIEDE 2000 colour‐difference formula . Coloration Technology, 133, 273(2017).

[23] Ji?í Filip, Radomír Vávra, Frank J. Maile. Optical analysis of coatings including diffractive pigments using a high-resolution gonioreflectometer. Journal of Coatings Technology and Research, 16, 555(2019).

[24] Zihao Winston Wang, Ming Ronnier Luo. Looking into special surface effects: diffuse coarseness and glint impression. Coloration Technology, 132, 153(2016).

[25] Ali Mohammadalizadeh, Fereshteh Mirjalili, Farhad Ameri, Siamak Moradian, Keivan Ansari, Mahdi Safi. Development of a perceptually uniform physical scale for visual assessment of specular gloss. Physica Scripta, 96, 035004(2021).

[26] M Melgosa, L Gómez-Robledo, G Cui, C Li, E Perales, F M Martínez-Verdú, T Dauser. Measuring color differences in gonioapparent materials used in the automotive industry. Journal of Physics: Conference Series, 605, 012006(2015).

Tools

Get Citation

Copy Citation Text

Zhongning Huang, Haisong Xu, M. Ronnier Luo, Guihua Cui, Huajun Feng, "Assessing total differences for effective samples having variations in color, coarseness, and glint," Chin. Opt. Lett. 8, 717 (2010)

Download Citation

EndNote(RIS)BibTex Plain Text

Set citation alerts for article

Save article for my favorites

Paper Information

Received: Feb. 1, 2010

Accepted: --

Published Online: Jul. 19, 2010

The Author Email:

DOI:10.3788/COL20100807.0717

Topics

laser devices and laser physics

Lasers and Laser Optics

laser manufacturing

Instrumentation, Measurement and Metrology