[1] Yin Z, Zhang P, Yu D G et al. Research progress on ultrasonic vibration-assisted EDM micro-hole machining[J]. Aeronautical Manufacturing Technology, 65, 53-63(2022).

[2] Khatri B C, Rathod P, Valaki J B. Ultrasonic vibration-assisted electric discharge machining: a research review[J]. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 230, 319-330(2016).

[3] Dhupal D, Doloi B, Bhattacharyya B. Modeling and optimization on Nd∶YAG laser turned micro-grooving of cylindrical ceramic material[J]. Optics and Lasers in Engineering, 47, 917-925(2009).

[4] Kibria G, Doloi B, Bhattacharyya B. Experimental analysis on Nd∶YAG laser micro-turning of alumina ceramic[J]. The International Journal of Advanced Manufacturing Technology, 50, 643-650(2010).

[5] Wang S W, Ding Y, Cheng B et al. Mechanism and research advances of water-jet guided laser micromachining[J]. Chinese Journal of Lasers, 49, 1002404(2022).

[6] Zhang G H, Huang Y X, Huang P et al. Study on energy transmission law of water-laser coupling in water-jet guided laser technology[J]. Laser Technology, 46, 749-754(2022).

[7] Zhang Z Y, Qin C L, Feng Q Y et al. Investigation on localisation and three-dimensional micro-etching based on pulse laser electrochemical machining[J]. Journal of Mechanical Engineering, 50, 200-206(2014).

[8] Wang Y F, Zhang W W. Theoretical and experimental study on hybrid laser and shaped tube electrochemical machining (laser-STEM) process[J]. The International Journal of Advanced Manufacturing Technology, 112, 1601-1615(2021).

[9] Wang Y F, Yang F, Zhang W W. Development of laser and electrochemical machining based on internal total reflection[J]. Journal of the Electrochemical Society, 166, E481-E488(2019).

[10] Saxena K K, Chen X L, Qian J et al. A tool-based precision hybrid laser-electrochemical micromachining process: process analysis by multidisciplinary simulations and experiments[J]. Journal of the Electrochemical Society, 167, 143502(2020).

[11] Saxena K K, Qian J, Reynaerts D. Development and investigations on a hybrid tooling concept for coaxial and concurrent application of electrochemical and laser micromachining processes[J]. Precision Engineering, 65, 171-184(2020).

[12] Saxena K K, Qian J, Reynaerts D. A tool-based hybrid laser-electrochemical micromachining process: experimental investigations and synergistic effects[J]. International Journal of Machine Tools and Manufacture, 155, 103569(2020).

[13] Zhang Z Y, Wang Y M, Chen F et al. Effects of process stability on precision of micro-ECM using nanosecond pulse current[J]. Journal of Nanjing University of Aeronautics & Astronautics, 43, 66-70(2011).

[14] Zhu H, Jiang Z X, Han J C et al. Fabrication of oxide-free dimple structure on germanium via electrochemical jet machining enhanced by opposing laser irradiation[J]. Journal of Manufacturing Processes, 85, 623-635(2023).

[15] Zhang Z Y, Jiang Y J, Huang L et al. Experiment study of laser thermal enhanced electrochemical deposition[J]. Microsystem Technologies, 23, 1695-1701(2017).

[16] Sun S F, Shao Y. Water-assisted laser induced plasma backside etching of Pyrex7740 glass[J]. Laser & Optoelectronics Progress, 54, 101404(2017).

[17] Cao Y, Sun S F, Zhang F Y et al. Screening of chemical solution for laser high temperature chemical composite processing of GH4049 alloy[J]. Journal of Qingdao University of Technology, 41, 33-39(2020).

[18] Ding R T, Sun S F, Liu Q Y et al. Effect of process parameters of laser chemical composite polishing on 304 stainless steel surface properties[J]. Laser Technology, 43, 295-300(2019).

[19] Deconinck D, van Damme S, Deconinck J. A temperature dependent multi-ion model for time accurate numerical simulation of the electrochemical machining process. Part I: theoretical basis[J]. Electrochimica Acta, 60, 321-328(2012).

[20] Yin J, Zhang Z Y, Zeng Y B et al. Simulation research of temperature field and electric field in laser electrochemical compound processing[J]. Laser & Optoelectronics Progress, 50, 121403(2013).

[21] Zhang Z Y, Feng Q Y, Cai M X et al. Research on stress-etching complex microstructure of aluminum alloy in laser electrochemical machining[J]. The International Journal of Advanced Manufacturing Technology, 81, 2157-2165(2015).

[22] Zhang H, Xu J W, Wang J M. Investigation of a novel hybrid process of laser drilling assisted with jet electrochemical machining[J]. Optics and Lasers in Engineering, 47, 1242-1249(2009).

[23] Zhang H F. Research on the mechanism and characteristics of laser-induced cavitation impact micro-forming on ultra-thin wall materials[D](2020).

[24] Qiang H. Study on interaction mechanism between laser-induced cavitation bubble and metal target underwater[D](2018).

[25] Dickinson E J F, Wain A J. The Butler-Volmer equation in electrochemical theory: origins, value, and practical application[J]. Journal of Electroanalytical Chemistry, 872, 114145(2020).

[26] Deconinck D, van Damme S, Albu C et al. Study of the effects of heat removal on the copying accuracy of the electrochemical machining process[J]. Electrochimica Acta, 56, 5642-5649(2011).

[27] Sogandares F M, Fry E S. Absorption spectrum (340–640 nm) of pure water. I. Photothermal measurements[J]. Applied Optics, 36, 8699-8709(1997).

[28] Hale G M, Querry M R. Optical constants of water in the 200-nm to 200-μm wavelength region[J]. Applied Optics, 12, 555-563(1973).

[29] de Silva A K M, Altena H S J, McGeough J A. Precision ECM by process characteristic modelling[J]. CIRP Annals, 49, 151-155(2000).

[30] Lohrengel M M, Klüppel I, Rosenkranz C et al. Microscopic investigations of electrochemical machining of Fe in NaNO3[J]. Electrochimica Acta, 48, 3203-3211(2003).

[31] Deconinck D, Hoogsteen W, Deconinck J. A temperature dependent multi-ion model for time accurate numerical simulation of the electrochemical machining process. Part III: experimental validation[J]. Electrochimica Acta, 103, 161-173(2013).